http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
초임계 스월 인젝터에서의 케로신 Surrogate 모델에 대한 수치적 연구
김국진(Kukjin Kim),허준영(Junyoung Heo),성홍계(Honggye Sung) 한국추진공학회 2010 한국추진공학회 학술대회논문집 Vol.2010 No.11
초임계 환경에서 작동하는 액체 로켓 엔진의 케로신 스월 인젝터에서 케로신 물성치에 따른 인젝터 내외에서의 분사 특성을 연구하였다. 케로신의 물성치를 계산하기 위해 surrogate 모델이 적용되었다. 난류 수치 모델은 large eddy simulation을 기반으로 하였으며 SRK 상태 방정식, Chung의 기법을 포함하고 있다. 초임계 환경의 수치 해석 결과는 천이 임계 조건의 결과와 비교되었으며 스월 인젝터 내부의 액막과 중심부 사이의 밀도 및 점성 계수 분포의 차이가 관찰되었다. Injection characteristics of a kerosene swirl injector of liquid rocket engine operating at supercritical environment have been investigated. Kerosene surrogate models are proposed to model the kerosene properties. Turbulent numerical model is based on large eddy simulation and contains Soave modification of Redlich-Kwong equation of state and Chung"s model. Numerical analysis results at supercritical environment are compared with the one at transcritical condition. Differences of density and viscosity are analyzed at both liquid film and core gas in the swirl injector.
김국진(Kukjin Kim),조성원(Seongwon Cho),김재민(Jaemin Kim),임철수(Cheolsu Lim) 한국지능시스템학회 2003 한국지능시스템학회논문지 Vol.13 No.3
웨이블릿 변환(Wavelet Transform)은 공간-주파수 영역에서 신호의 국소특성을 효율적으로 구현할 수 있다. 하지만, 웨이블릿 변환을 패턴 인식을 위한 특징 추출에 적용할 경우, 입력 신호의 위치 이동에 따라 추출된 특징 값이 변화하게 되어 인식률이 낮아지는 결함이 있다. 본 논문에서는 웨이블릿 변환을 패턴 인식에 적용할 경우 발생하는 입력 신호의 위치 이동에 따른 문제점을 보완하여 노이즈에 강인한 홍채인식 알고리즘을 제안한다. 실험을 통하여 제안한 알고리즘의 우수성을 보여준다. Wavelet Transform can effectively represent the local characteristics of a signal in the space-frequency domain. However, the feature vector extracted using wavelet transform is not translation invariant. This paper describes a new feature extraction method using wavelet transform, which is translation-invariant. Based on this translation-invariant feature extraction, the iris recognition method, based on this feature extraction method, is robust to noises. Experimentally, we show that the proposed method produces super performance in iris recognition.
초임계 압력 조건에서 스월 인젝터 내 케로신 대체 모델의 열역학 물성 특성 연구
김국진(Kukjin Kim),허준영(Junyoung Heo),성홍계(Honggye Sung) 한국추진공학회 2012 한국추진공학회 학술대회논문집 Vol.2012 No.11
초임계 압력 조건에서 상태 방정식(이상 기체, SRK, PR, RK-PR)과 케로신 대체 모델에 따른 열역학 상태량과 스월 인젝터에서의 열역학 물성 특성을 연구하였다. 난류 수치 모델은 large eddy simulation을 사용하였으며 전달 물성치의 계산을 위해 Chung의 기법을 포함하고 있다. 열역학 상태량 비교를 통하여 매우 높은 정확도를 나타내는 실 기체 상태 방정식과 케로신 대체 모델을 도출하였다. 또한 초임계 스월 인젝터 내에서 열역학 물성(밀도, 음속, 점성 계수, 열 전도도)을 비교 조사하여 상태량 예측 정확도가 초임계 스월 인젝터에서의 동적 분사 특성에 큰 영향을 미치는 것이 관찰되었다. Thermophysical properties of kerosene surrogates in a swirl injector operating at supercritical pressure condition have been investigated using various equations of state(ideal gas, SRK, PR, RK-PR). Large eddy simulation has been applied for turbulent numerical model including Chung"s model for the calculation of transport properties. Based on the comparison of thermophysical properties such as density, speed of sound, viscosity, and thermal conductivity, the real gas equation of state, RK-PR, and a surrogate model consisting of 4 components are proposed to be very high accuracy. The thermophysical properties have fairly influence on the dynamic characteristics in supercritical swirl injector.
김국진(Kim Kukjin),임은표(Lim Eunpyo),강영승(Kang Youngseung) 한국마린엔지니어링학회 2010 한국마린엔지니어링학회 학술대회 논문집 Vol.2010 No.10
Compared to its simplicity, the variations of high(low) tide interval, and tide form(diurnal, semidiurnal, and complex tide) could be explained. Non-tidal components due to meteorological effects and river discharge are also investigated in time and space. It may be the most prominent merit that it dose not make a discontinuous step at the tide zoning boundaries. Tidal correction in real time for Electronic Navigational Chart could be implemented. If TCARI is combined with high-resolution sounding data, vessel's draft and load condition, Dynamic ENC is expected possible soon. Although high density of tide stations for long-term tide(more than one year at least) is restriction condition, its feasibility is ensured.
실상태방정식 및 스월강도에 따른 동축와류형 분사기의 케로신/액체산소 초임계 혼합특성 연구
허준영(Junyoung Heo),김국진(Kukjin Kim),성홍계(Hong-Gye Sung) 한국추진공학회 2013 한국추진공학회 학술대회논문집 Vol.2013 No.5
초임계환경에서 작동하는 케로신/액체산소 동축와류형 분사기의 혼합특성을 3차원 수치해석으로 연구하였다. 난류모델은 LES를 기반으로 하였고, 초임계영역의 상태량을 계산하기위해 실제기체 상태방정식 (SRK PR, RK-PR), 점성계수와 열전도도에 대하여 Chung이 제안한 고압상태 혼합물에 대한 방정식, 확산계수에 대하여 Fuller 이론에 Takahashi가 제안한 고압상태의 특징을 고려한 식을 적용하였다. 그리고 분사기의 실기체 상태방정식과 스월 강도에 따른 압력섭동 스펙트럼 밀도를 해석하였다. The turbulent mixing of a kerosene/liquid oxygen coaxial swirl injector under supercritical pressures have been numerically investigated in three dimensional system. Turbulent numerical model is based on LES (Large Eddy Simulation) with real-fluid transport and thermodynamics over the entire pressure range; Real-gas equation of state (SRK, PR, and RK-PR), Chung"s model for viscosity/conductivity, and Fuller"s theorem for diffusivity to take account Takahashi"s compressible effect. The effect of real-gas equation of state and swirl intensity are investigated and power spectral densities of pressure fluctuations in the injector are analyzed.
김영택(Young-Taeg Kim),이은일(Eunil Lee),백혜연(Hye yeon Baek),한충근(Chung-Keun Han),김국진(Kukjin Kim) 한국마린엔지니어링학회 2009 한국마린엔지니어링학회 학술대회 논문집 Vol.2009 No.-
Various methods for sediment transport paths are their applications reviewed to identify the potentials and limitations of each analysis tool. Gao and Collins (1992)'s two-dimensional trend method was applied to define the net sediment transport patterns in the southern channel of Jungangcheontae, Asan Bay. A revised code developed by Chang et al(2001), available at http://www.iamg.org/CGEditor/index.htm. was used as well.
초음속 노즐 내부 이차제트 분출을 통한 추력편향 제어에 관한 연구
윤상훈(SangHoon Yoon),김국진(KukJin Kim),민성규(SeongKyu Min),이열(Yeol Lee),전동연(DongYeon Chun) 한국추진공학회 2008 한국추진공학회 학술대회논문집 Vol.2008 No.11
수축-확대 초음속 노즐 내부에 분출된 이차제트에 의한 추력편향 제어에 관한 실험적, 수치적 연구가 진행되었다. 특정위치(노즐 목으로부터 12mm 떨어진 곳)에서 분출되는 이차제트 유동전압이 변화할 때 나타나는 제트유동의 추력편향 특성이 관찰되었다. 수치해석 결과는 동일한 경계조건에서 수행된 과거 연구결과 및 본 연구에서 수행된 쉴러린 유동가시화 결과와 비교되었으며, 정성적으로 좋은 일치를 나타냈다. 추력편향의 특성은 노즐 내부의 경사충격파의 반사구조, 즉, 이차제트 압력비 SPR의 크기에 관계되어 있음이 관찰되었다. Thrust vectoring control by injection of secondary jet inside a convergent-divergent supersonic nozzle was studied by both experimentally and computationally. For various stagnation pressure of the secondary jet injected at a specific location(12 mm-downstream of throat) in the divergent section of nozzle, the characteristics of thrust vectoring were observed. Present numerical results were compared with previous investigators" results and Schlieren flow visualizations for the identical boundary conditions, and it showed a qualitatively good agreement. It was also noticed that the characteristics of thrust vectoring is strongly related to the reflection structure of oblique shock inside nozzle, ie., the pressure ratio of the secondary jet, SPR.