http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
표면 조성분석의 정량화를 위한 Pt - Co 합금박막 표준시료의 개발 및 공동분석
김경중(K. J. Kim),문대원(D. W. Moon),한명섭(M. S. Han),강희재(H. J. Kang),김준곤(J. K. Kim),한승희(S. H. Han),이중환(J. H. Lee),윤선진(S. J. Yun),신광수(K. S. Shin),김차연(C. Y. Kim),김태형(T. H. Kim),이동석(D. S. Lee),김영남(Y. N. Kim),최홍 한국진공학회(ASCT) 1998 Applied Science and Convergence Technology Vol.7 No.3
Si 기판 위에 3종의 Pt-Co 합금박막 (Pt66-Co34, Pt40-Co60, Pt18-Co82)과 순수한 Pt, Co 박막 시료를 제작하여 표면 조성분석의 정량화 및 표준화를 위한 표준시료로 제안하였다. in-situ X-ray photoelectron spectroscopy(XPS) 분석에 의해 증착된 이원 합금박막의 조성이 정확히 조절되었으며, 합금박막의 실제 조성은 유도결합플라즈마-원자방출분광법 (inductively coupled plasma-atomic emission spectroscopy: ICP-AES)과 러더퍼드 후방산란분광법 (Rutherford back-scattering spectrometry: RBS)에 의해 결정되었다. in-situ XPS 결과와 ICP에 의한 조성을 비교한 결과 매질 효과를 고려하면 비교적 정확한 조성을 구할 수 있음이 확인되었다. 이 시료를 이용한 XPS와 Auger electron spectroscopy(AES)에 의한 국내 공동분석 결과는 약 4% 내외의 큰 편차를 보이고 있지만, 평균 조성 값은 약 1%의 오차 범위 내에서 두 방법에 의한 결과가 서로 잘 일치하였다. 이온빔 스퍼터링에 의해 Pt 조성이 증가된 표면층이 형성되어 정확한 조성분석을 위해서는 선택스퍼터링에 의한 표면 변형을 정량적으로 이해하여야 함을 알았다. Pure Pt, Co and their alloy thin films with three different compositions (Pt66-Co34, Pt40-Co60 and Pt18-Co82) were deposited on Si(100) wafers and proposed as a set of certified reference materials (CRM) for the quantification and standardization of surface compositional analysis. The compositions of the binary alloy thin films were controlled by in-situ XPS analyses and the certified compositions of the films have been determined by ICP-AES and RBS analyses after thin film growth. Through comparison of the compositions determined by in-situ XPS with those by ICP, relatively accurate compositions could be obtained with a matrix effect correction. Standard deviations of XPS and AES round robin tests with the Pt-Co alloy thin films were large up to about 4%. On the other hand, the average compositions of the Pt-Co alloy thin films by two methods were in a good agreement within 1 %. The formation of a Pt rich surface layer by ion beam sputtering indicates that the surface modification by preferential sputtering must be understood for a better compositional analysis.
소화성궤양 환자의 가스트린분비세포와 벽세포의 위장관내 분포에 대한 비교관찰
김경중(K J Kim),지무영(M Y Chi) 대한소화기학회 1986 대한소화기학회지 Vol.18 No.1
To evaluate the distribution of gastrin cells and parietal cells, gastrin cells have been identified by staining with PAP technique parietal cells were demonstrated by staining with H-E. We studied in 72 cases from Feb. 1985 to Sep. 1985. The results were as follows: 1) There were no G-cells in the body in controls or in patients. 2) The number of G-cells in the mucosa of the antrum, in patients with stomach cancer, were markedly decreased(1.98 +- 2.08/H.P.F) than controls(4.70 +- 4. 39/H.P.F). There was significant differences were found(p<0.005). 3) The number of G-cells in the mucosa of the prepyloric region and duodenum, no sign- ificant differences were found in patients in comparison with controls. 4) The number of parietal cells in the mucosa of the body, it seems to be extremely de- creased in stomach cancer patients than in controls(p<0.005).
in - line XPS와 AFM을 이용한 유기물의 UV / ozone 건식세정과정 연구
이경우(K. W. Lee),황병철(B. C. Hwang),손동수(D. S. Son),천희곤(H. G. Chun),김경중(K. J. Kim),문대원(D. W. Moon),안강호(K. H. Ahn) 한국진공학회(ASCT) 1995 Applied Science and Convergence Technology Vol.4 No.3
본 실험에서는 실리콘 웨이퍼 위에 photoresist(PR)와 octadecyltrichlorosilane(OTS, CH₃(CH₂)_l7SiCl₃)를 입혀서 UV/ozone 처리를 하였을 때 어떻게 유기물질들이 UV/ozone과 반응하여, 어떻게 표면에서 제거되는지를 in-line으로 연결된 XPS로 분석하고 반응시킨 표면들의 거칠기(roughness)를 AFM을 이용하여 관찰하였다. 실험결과 상온에서 UV/ozone 처리를 했을 경우, PR과 OTS같은 유기물질이 표면에서 산화되는 것을 알 수 있었으나 이들이 제거되지 않고 표면에 그대로 남아있음을 알 수 있었다. 그러나 가열하면서(PR : 250℃, ORS : 100℃) UV/ozone 처리를 하였을 경우 표면에서 산화됨과 동시에 이들 산화물들이 표면에서 제거됨을 알 수 있었다. XPS 분석으로부터 이들의 산화 반응물은 PR과 OTS 모두 -CH₂- , -CH₂O- , =C=O, -COO-를 가지는 것으로 나타났으며, 열에너지에 의해서 이들이 표면에서 제거되는 것으로 나타났다. AFM 분석결과는 상온에서 UV/ozone 처리를 하였을 경우에 표면의 거칠기가 적은 반면, 가열하면서 UV/ozone 처리를 하였을 경우에는 표면의 거칠기가 다소 증가하였다. In this work, photoresist (PR) and octadecyltrichlorosilane (OTS, CH₃(CH₂)_17SiCl₃) on Si were removed by the UV/ozone cleaning method and the surfaces were analyzed byin-line XPS to study mechanisms how the organic films react with UV/ozone and removed from the surface. The surface topographic changes were also observed by AFM. UV/ozone treatments of PR and OTS films at room temperature resulted in the oxidation of the organic surface contaminants, which remained on the surface of the silicon substrates at room temperature. The PR and OTS were oxidized and desorbed very rapidly by UV/ozone treatment at 100℃ and 200~250℃, respectively. From the XPS analyses, it was found that PR and OTS were oxidized to compounds having -CH₂-, -CH₂O-, =C=O, -COO- and desorbed from the surface upon heating. Thd AFM results showed that the UV/ozone treatments of PR and OTS at room temperature did not increase the surface roughness, but the surface roughness was increased at the higher temperature(PR : 250℃, OTS : 100℃).
후육부 사출수축 최소화를 위한 TV Cabinet의 설계에 관한 연구
송호권(H. K. Song),김경중(K. J. Kim),금영탁(Y. T. Keum) 한국소성가공학회 2012 한국소성가공학회 학술대회 논문집 Vol.2012 No.10
In order to minimize the injection shrinkage in the thick area of TV cabinet, the thickness of the curved and thick areas and the location of the gates for dual-injection are optimized by using the design of experiments. The flow analysis employing the finite element method provides the shrinkage at the thick area. The optimum condition to minimize the shrinkage after the dual-injection is primarily concerned with the pressure transfer at flow ways. The 30% decrease of injection shrinkage was shown in the real test.
UV - excited chlorine radical을 이용한 실리콘 웨이퍼상의 금속 오염물의 건식세정에 관한 연구
손동수(D. S. Son),황병철(B. C. Hwang),조동율(T. Y. Cho),천희곤(H. G. Chun),김경중(K. J. Kim),문대원(D. W. Moon),구경완(K. W. Koo) 한국진공학회(ASCT) 1997 Applied Science and Convergence Technology Vol.6 No.1
본 연구에서는 실리콘 웨이퍼 표면에 존재하는 미량의 Zn, Fe, Ti 금속 오염물들이 UV-excited chlorine radical을 이용한 건식세정 방법으로 제거되는 반응과정을 찾아내고자 하였다. 실리콘 웨이퍼 상에 진공증착법으로 원형패턴이 있는 Zn, Fe, Ti 박막을 증착시켜 상온 및 200℃에서 UV/Cl₂ 세정하였을 때, 염소 래디컬 (Cl*)이 Fe, Zn, Ti와 반응하여 제거되는 것을 반응 전후 광학현미경과 SEM을 통해 표면 형상 변화을 관찰하였고, in-line으로 연결된 XPS를 통해서 반응 후 웨이퍼 표면에 남아있는 화합물의 화학적 결합상태를 관찰하였으며, UV/Cl₂ 세정 후 실리콘 기판이 손상받는 정도를 알기 위해 AFM으로 표면 거칠기를 측정하였다. 광학현미경과 SEM의 분석 결과에 의하면 Zn와 Fe는 쉽게 제기되는 반면 염화물을 형성하기 보다는 휘발성이 적은 산화물을 형성하는 경향이 강한 Ti은 약간만 제거되는 것을 확인하였다. XPS 분석을 통해서 이들 금속 오염물들이 chlorine radical과 반응하여 웨이퍼 표면에 금속 염화물을 형성하고 있는 것을 확인하였고, UV/Cl₂ 세정처리를 하였을 때 실리콘 웨이퍼의 표면 거칠기가 약간 증가하는 것을 알 수 있었다. 지금까지의 결과를 통해 볼 때, 습식세정과 UV/Cl₂ 건식세정을 병행하면 플라즈마 및 레이저를 사용하는 다른 건식세정 방법에 비하여 보다 저온에서 실리콘 기판의 큰 손상 없이 비교적 용이하게 금속 오염물을 제거할 수 있음을 제안하였다. The reaction mechanisms of dry cleaning with UV-excited chlorine radical for Zn, Fe and Ti trace contaminants on the Si wafer have been studied by SEM, AFM and XPS analyses in this work. The patterned Zn, Fe and Ti films were deposited on the Si wafer surface by thermal evaporation and changes in the surface morphology after dry cleaning with Cl₂ and UV/Cl₂ at 200℃ were studied by optical mocroscopy and SEM. In addition, changes in the surface roughness of Si wafer with the cleaning was observed by AFM. The chemical bonding states of the Zn, Fe and Ti deposited silicon surface were observed with in-line XPS analysis. Zn and Fe were easily cleaned in the form of volatile zinc-chloride and iron-chloride as verified by the surface morphology changes. Ti which forms involatile oxides was not easily removed at room temperature but was slightly removed by UV/Cl₂ at elevated temperature of 200℃. It was also found that the surface roughness of the Si wafer increased after Cl₂ and UV/Cl₂ cleaning. Therefore, the metallic contaminants on the Si wafer can be easily removed at lower temperature without surface damage by a continuous process using wet cleaning followed by UV/Cl₂ dry cleaning.