http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
레이더 신호와 머신러닝을 이용한 비가시 공간에서의 삼차원 자세 추정 연구
김건우(Kim Gon Woo),이상원(Lee Sang Won),최계원(Choi Kae Won) 한국통신학회 2022 한국통신학회 학술대회논문집 Vol.2022 No.2
비가시 공간의 물체를 탐지하는 기술은 군사적, 인명구조, 자율 주행 등의 다양한 목적에서 주목받고 있다. 본 논문은 다중 송 · 수신 안테나와 UWB(Ultra-Wide Bandwidth) 레이더 칩을 통해 데이터 수집 실험 환경을 구성한다. 구성한 환경을 이용하여 수집한 신호를 데이터로 활용하고 해당 데이터셋을 DETR (DEtaction TRansformer) 모델을 통해 비가시 공간의 사람에 대한 키포인트를 탐지하고 탐지한 키포인트를 이용하여 사람의 포즈를 추정하는 알고리즘을 제시한다.
인공신경망을 이용한 다중 채널 주파수 공유 알고리즘 연구
김건우(Kim Gon Woo),최계원(Choi Kae Won) 한국통신학회 2021 한국통신학회 학술대회논문집 Vol.2021 No.2
점점 증가하는 사용자로 인해 한정된 채널 자원의 사용 효율 증가의 필요성이 증가하고 있는 추세이다. 그에 따라 IEEE 802.11의 개정은 고밀도의 네트워크 환경에서 채널의 사용효율을 높이고 지연율을 감소시키는 방향으로 변화하고 있다. 이에 맞춰 본 논문에서는 가장 최근의 개정인 802.11ax 환경에 적응하여 별도의 경쟁 기반 알고리즘을 사용하지 않고 통신하는 알고리즘을 제안한다. 추가로 강화학습의 인공신경망 구조를 변화시켜 성능을 비교 분석하였다.
유한 오름 시간을 갖는 음전위 펄스에서 시변환 플라즈마 덮개의 거동 연구
김곤호(Gon-Ho Kim),김영우(Young-Woo Kim),김건우(Gun-Woo Kim),한승희(Seunghee Han),홍문표(Mun-Pyo Hong) 한국진공학회(ASCT) 1999 Applied Science and Convergence Technology Vol.8 No.3(2)
플라즈마 이온주입에서 유한한 고유 오름 시간을 갖는 음전압이 펄스 형태로 평면 타겟에 인가될 때 타겟 주위로 형성되는 시 변환 플라즈마 덮개(time dependent sheath)를 관찰하였다. 이때 형성되는 시 변환 플라즈마 덮개는 서로 다른 특성을 갖는 두 개의 영역으로 구성되어 있음이 관찰되었다. 펄스 오름 시간동안에 형성되는 플라즈마 덮개는 플라즈마 밀도의 역수와 펄스 오름 비율의 루트에 비례하고 펄스 시간의 루트에는 비례하며 이온 질량에 관계없이 진행하는 이온 매트릭스 덮개의 전개가 관찰되었으며 펄스 오름 시간 이후에는 이용의 음속도에 비례하는 동적 플라즈마 덮개의 전개가 관찰되었다. It was observed that the time-dependent sheath which was formed around the planar target biased by negatively voltage pulse with a finite rise time in the plasma source ion implantation. Results show that the time-dependent sheath consisted of two parts: the ion matrix sheath development during the pulse rise time and the dynamic sheath motion after attaining the full pulse. The ion matrix sheath development which is in proportion to square root of the pulse time and the pulse rise rate over the plasma density but independent of the ion mass. The dynamic sheath propagates with approximately the ion sound speed.
김진욱(Jin Wook Kim),김건우(Kun-Woo Kim),김석곤(Seok Gon Kim) 한국산업경영시스템학회 2015 한국산업경영시스템학회지 Vol.38 No.3
The IRR(internal rate of return) is often used by investors for the evaluation of engineering projects. Unfortunately, it has serial flaws: (1) multiple real-valued IRRs may arise; (2) complex-valued IRRs may arise; (3) the IRR is, in special cases, incompatible with the net present value (NPV) in accept/reject decisions. The efforts of management scientists and economists in providing a reliable project rate of return have generated over the decades an immense amount of contributions aiming to solve these shortcomings. Especially, multiple internal rate of returns (IRRs) have a fatal flaw when we decide to accep it or not. To solve it, some researchers came up with external rate of returns (ERRs) such as ARR (Average Rate of Return) or MIRR (MIRR, Modified Internal Rate of Return). ARR or MIRR. will also always yield the same decision for a engineering project consistent with the NPV criterion. The ERRs are to modify the procedure for computing the rate of return by making explicit and consistent assumptions about the interest rate at which intermediate receipts from projects may be invested. This reinvestment could be either in other projects or in the outside market. However, when we use traditional ERRs, a volume of capital investment is still unclear. Alternatively, the productive rate of return (PRR) can settle these problems. Generally, a rate of return is a profit on an investment over a period of time, expressed as a proportion of the original investment. The time period is typically the life of a project. The PRR is based on the full life of the engineering project. but has been annualised to project one year. And the PRR uses the effective investment instead of the original investment. This method requires that the cash flow of an engineering project must be separated into ‘investment’ and ‘loss’ to calculate the PRR value. In this paper, we proposed a tabulated form for easy calculation of the PRR by modifing the profit and loss statement, and the cash flow statement.
강화학습을 활용한 다중 스펙트럼 채널 접근 기술에 대한 연구
박종인(Jong In Park),김건우(Gon Woo Kim),김지수(Ji Su Kim),최계원(Kae Won Choi) 대한전자공학회 2022 전자공학회논문지 Vol.59 No.1
802.11 무선 통신 환경에서는 다른 사용자와의 충돌을 회피하기 위해 CSMA/CA 방식의 채널 접근 기술을 사용한다. CSMA/CA방식은 충돌을 회피하기 위한 과정에서 채널 자원의 손실이 발생하게 되고 사용자가 밀집되고 많은 상황에서는 이러한 손실이 더 커지게 된다. 그러나 사용할 수 있는 채널 스펙트럼은 고정되어 있으므로 제한된 채널 자원에서 손실을 줄이는 것이 중요하다. 이에 본 논문에서는 기존의 채널 접근 방식에서 충돌을 회피하기 위해 발생하는 채널 자원의 손실을 줄이기 위해 강화학습을 활용한 채널 접근 기술을 제시한다. 또한, 기존의 채널 접근 기술과 비교하여 성능을 확인하고 안정적인 채널 운용과 제한된 채널 자원을 효율적으로 사용할 수 있는 방향을 제안한다. In the 802.11 wireless communication environment, a CSMA/CA channel access technology is used to avoid collisions with other users. In the CSMA/CA method, loss of channel resources occurs in the process of avoiding collision, and in situations where users are concentrated and there are many, this loss becomes greater. However, since the available channel spectrum is fixed, it is important to reduce losses in limited channel resources. Therefore, this paper presents a channel approach technology using reinforcement learning to reduce the loss of channel resources generated to avoid collision in the existing channel approach. In addition, compared to the existing channel access technology, a direction in which performance can be checked and stable channel operation and limited channel resources can be efficiently used is proposed.
창준협(Jun-Hyup Chang),김건우(Kun-Woo Kim),전창호(Chang-Ho Jeon),금태훈(Tae-Hoon Keum),김승곤(Seung-Gon Kim),이상준(Sang-Jun Lee),이원주(Won-Joo Lee) 한국컴퓨터정보학회 2011 한국컴퓨터정보학회 학술발표논문집 Vol.19 No.2
본 논문에서는 Flow 모니터링 및 제어, Graph 출력, Test, History 등의 기능을 제공하는 연소기 제어 시스템을 설계하고 구현한다. Flow 모니터링 및 제어 기능은 각 채널의 현재 유량을 표시하고, 제어할 수 있다. Graph 출력 기능은 현재 채널의 상태를 그래프로 나타낸다. Test는 현재 구성된 환경이 정상적으로 동작하는지 시험하는 기능을 제공하며, Setting은 각 채널의 채널명, Point set, Range, 허용오차를 설정한다. 그리고 History는 저장된 데이터를 읽어와 Error기록, 사용자에 의해 저장된 데이터, 24시간마다 자동 저장되는 데이터를 그래프로 표시해 준다. 본 논문에서 제안한 연소기 제어 시스템을 이용해서 실제 유량을 측정한 결과, 정확한 유량의 측정을 할 수 있었다.
김곤호,김건우,김영우,최영도,김종식,김상진,한승희,홍문표 漢陽大學校 工學技術硏究所 1998 工學技術論文集 Vol.7 No.1
Abstract- In a plasma source ion implantation, the target is successively biased by negative voltage pulses with an intrinsic finite rise time, resulting in the time-dependent sheath formation around the target. Measurement of time-dependent sheath during the pulse rise show the ion matrix sheath development which is in proportion to square root of time and pulse rise rate over plasma density but independent of the ion mass.