http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
권택만(Tagman Kwon),정지선(Jisun Jung),심행근(Hanggeun Shim),장주수(Jusu Jang) 한국신뢰성학회 2011 신뢰성응용연구 Vol.11 No.4
Reliability evaluation of One-Shot system which flies at speed of Mach must be evaluated as the result of many firing tests. But many firing tests are impossible because of budget deficit. Consequently the reliability prediction which substitutes firing tests is used. The accuracy of reliability prediction is decided according to a quantity of accumulated test data. If the test data is insufficient, the direction of prediction can not be set. So we propose the reliability prediction method which applies MIL-HDBK-217 Plus. MIL-HDBK-217 Plus is described about reliability prediction method without sufficient test data. So we apply MIL-HDBK-217 Plus to the rocket motor system, and we accomplish a modeling and a reliability prediction about the system.
윤근식,권택만,박병찬,Yoon Keun-sig,Kwon Tag-man,Park Byung-chan 한국군사과학기술학회 2004 한국군사과학기술학회지 Vol.7 No.4
The ASTP is the standard of the assessment ASRP that is monitoring the performance, reliability and safety characteristics of the ammunition items. The ASTP used in domestic now has applied to US Army's grade system and grading criteria so that it cause some problems. To resolve these problems of ASTP, we surveyed both the quality level of production and the field management of ammunition, which compared with grade system and classification criteria. As a result of study, we changed grade system from four steps to three steps and applied the Korean Military Specifications and the Malfunction Criteria to the classification criteria of grades. We are looking forward to improving the reliability and effectiveness of ASRP assessment by simplifying grade system and generalizing grading criteria of ASTP.
안만기,권택만,황운희,황우열,Ahn, Mahn-Ki,Kwon, Tag-Mahn,Hwang, Un-Hee,Hwang, Woo-Yull 한국군사과학기술학회 2010 한국군사과학기술학회지 Vol.13 No.6
This paper describes on methods in test and evaluation of the guided rocket munitions of the domestic new generation multiple launcher rocket system. We modified and refer to the present model of air-to-air missile(AAM) and surface-to-air missile(SAM). Also we suggested a method of surface-to-surface missile(SSM) based on the characteristics of the guided rocket in test and evaluation(T&E). According to this study, the suggested activity of T&E should be observed methods compatible with each item on the established model. Therefore, we expect that the proposed research material will be a good guide to the study of a surface-to-surface missile(SSM) installed GPS/INS integration navigation guidance & control systems in the future.
박진만,권택만 한국품질경영학회 2022 한국품질경영학회 학술대회 Vol.2022 No.2
저장탄약신뢰성평가(ASRP; Ammunition Stockpile Reliability Program)는 탄약 저장고에서 보증기간이 도래하거나 초과할 때까지 장기저장된 탄약의 안전성, 기능성 등을 시험하여 계속 사용 가능 여부를 판단하는 평가 시스템이다. 국방기술품질원은 10년간 저장된 고체추진기관의 표준모터와 추진제 블록을 시험하여 양호한 시험 결과를 얻었고, 해당 탄약의 ASRP 계획에 따라 5년 후 15년간 저장된 고체추진기관의 표준모터와 추진제 블록을 포함하여 고체 추진기관 자체를 시험하였으며, 표준모터와 추진제 블록은 양호한 시험 결과를 얻었으나 추진기관의 온도반복시험에서 추진제의 균열이 발견되어 균열의 발생 원인을 분석하였다. 장기저장된 탄약의 계속 사용가능 여부를 판단하는 세부 기준은 탄약에 따라 상이하지만 거시적인 관점에서는 시효성 품목과 시한성 품목의 열화 정도로 전체 탄약의 상태를 판단하는 방향으로 발전하였다. 이러한 시험평가 기준은 시효성, 시한성 품목의 노화에 관한 연구로 발전하였고, 핵심 구성품이며 대표적인 시효성 품목인 추진제는 고가의 추진기관이 소모되는 기존의 시험을 표준모터, 추진제 블록과 같은 시험용 표본의 시험으로 대체하자는 일부의 의견으로 발전되었다. 본 연구에서는 저장탄약신뢰성평가 용도로 생산된 고체추진기관의 표준모터, 추진제 블록의 시험에서는 발견되지 못한 추진기관의 구조적 결함을 추진기관 온도반복시험을 통해 확인함에 따라, 표준모터나 추진제 블록과 같은 시험용 표본을 사용한 시험만으로는 확인할 수 없는 추진기관의 구조적인 결함 발견사례를 통해 노화가 진행되기 전인 개발 및 평가 단계에서는 식별하기 어려운 제3의 결함 원인을 공유하고자 한다.
학술 7 특별구두세션 : PB. 포스터세션2 ; 디지털무늬 신형전투복 원단의 색상관리 표준화 연구
임채근 ( Chae Keun Lim ),권택만 ( Tag Man Kwon ) 한국품질경영학회 2014 한국품질경영학회 학술대회 Vol.2014 No.2
1. 목적 · 디지털무늬 신형전투복 원단의 색상시험을 육안판정에서 분광광도계를 이용한 색차 측정에 의한 색상범위 설정을 통해 시험의 객관성 확보 및 색상관리 표준화 방안 제시 . 2. 연구설계/ 방법론/ 접근방법 · 신형전투복용 표준원단과 색상별 담색에서 농색까지 단색으로 날염한 Color Chip을 활용하여 육안판정관 분광광도계를 이용한 색차 측정으로부터 색 속성 분석과 통계처리에 의한 상관관계성 산출. · 색상별호 산출된 상관관계성으로부터 최적화된 색차 허용범위(△ECMC값) 설정. 3. 연구결과 · 신형전투복 원단 구매요구서 반영을 위해 색상별 색차 값 관련기관(방위사업청 등)에 제시. 4. 실무적 시사점 · 국방섬유 관련 각종 원단류(육,해,공군/해병대 정복 및 근무복 원단류 등)에 대한 색상관리 표준화 연구시 활용. 5. 독창성/ 가치 · 표준원단과 Color Chip을 통한 육안판정의 결괴와 색 속성으로부터 산출된 색차식을 활용하여 상관관계성으로부터 도출된 색상별 색차범위 설정으로 새호운 색상관리 표준화 방안 정립. · 색상관리가 요구되는 민수 섬유분야 및 타 산업분야(페인트제조 등)에 색상관리 절차수립에 활용. · 제품의 색상관리를 위해 색상시험 시 시험자의 객관성 확보와 시험 의뢰자의 신뢰성 증대에 기여.
정지선 ( Ji Sun Jeong ),권택만 ( Tae Man Kwon ),황우열 ( Woo Yull Hwang ) 한국품질경영학회 2012 품질경영학회지 Vol.40 No.3
Purpose: This study identified the standardization activities from the early stage of acquisition to disposal during the materiel life cycle and proposed the improvement of standardization process. Methods: Through improvement of duplicated deliberation for the revision of military specification, unification of technical change proposal reception organization, and resolution between the conflicting parts of laws and regulations, simplifying the standardization procedure and strengthening linkages between the civilian standards were gained. Results: We have redefined the concept of the standards and standardization in the field of defense and proposed the standards-driven documentary standards as a measurement standards and reference standards to expand the activities. Conclusion: Through a standardization survey, we came to conclusion that we need to change the concept of standardization in the field of national defense from making the specification to using the means of efficient management of military resources.
채경민(Kyungmin Chae),박종완(Jongwan Park),권택만(Tagman Kwon),황우열(Wooyeol Whang) 한국추진공학회 2010 한국추진공학회 학술대회논문집 Vol.2010 No.11
155mm 탄약에 사용되는 항력감소제는 다년간의 생산을 통해 안정적인 성능 및 품질 신뢰도를 확보하여 왔다. 이러한 기반 하에 비행시험 평가 대체기법의 타당성에 대한 연구를 수행하였으며 이를 통해 품질 안정성에 대한 확인뿐 아니라 비용감소, 시험 적체 해소 및 전력화 지연 방지 등의 대내외적인 효과를 얻을 수 있을 것으로 기대된다. BBU for 155mm projectile has been verified its stable performance and quality reliability through the production for several years. We have researched substitution test for flight test of BBU. Through this research, we expect the verification of quality stability and other collateral effect like the cost reduction and delivery on time.