http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김지성,윤정인,정경국,김성윤,강희욱,이종률,손원일,김경남,이두용 한국마린엔지니어링학회 2018 한국마린엔지니어링학회지 Vol.42 No.4
This study aims to develop bridge equipment for terrestrial and maritime terminal stations and automatic tracking antenna systems for low-cost base stations. The tests were performed considering the bridging speed, hardware recovery, distance range and communication speed. The bridging speed test was conducted by installing a bridging device and an antenna, and it was confirmed that the existing antenna could be connected to the new antenna within 10 s if the connection was cut off because of signal interruption. The hardware recovery test method was used to install the bridge device, and it was confirmed that the time to reach the login screen by pressing the power button of the breeze device was within 60 s. The test method of the distance range test verified the communication status of the land base station and the repeater, and it was confirmed through the GPS equipped in the repeater that the distance between the land base station and the repeater was over 30 km. The test method of the communication speed test aimed to check the communication status by connecting to the site for the transmission test using the installed repeater. This test confirmed that the communication speed between the terrestrial base station and the repeater was over 1 Mbps at a 30 km distance. The experiment showed that in all tests, the bridging processing speed was 3.16 s; the hardware recovery time was 52.21 s; the communication distance was 32.26 km; and the communication speed for downloading was 6.35 Mbps, whereas that for uploading was 4.05 Mbps. The results of this study are expected to contribute to the development of a remote monitoring system 본 논문의 목적은 육상 및 해상 단말기지국용 브릿지 장비, 저가 보급형 기지국 자동추적 안테나 시스템을 개발하는 것이다. 시험은 브리징 처리속도, 하드웨어 복구, 통달거리 및 통신속도로 총 4가지를 기본적으로 실시하였다. 브리징처리속도 시험의 실험방법은 브리지 장비와 안테나를 설치하고 기존의 안테나가 신호단절로 인하여 연결이 끊어졌을 경우 10 초 이내에 새로운 안테나에 연결이 가능한지 확인하였다. 하드웨어 복구 시험의 실험방법은 브리지 장비를 설치하고 브리장비의 전원을 눌러 로그인 화면이 나올 때까지의 시간이 60 초 이내인지 확인하였다. 통달거리 시험의 실험방법은 육상 기지국과 중계기의 통신상태를 확인하고 중계기가 장착된 GPS를 통해 육상 기지국과 중계기의 거리가 30 km이상인지 확인하였다. 통신속도 시험의 실험방법은 설치된 중계기를 이용하여 전송시험을 위한 사이트에 접속하여 통신상태를 확인한 뒤 30 km거리에서 육상 기지국과 중계기의 통신속도가 1 Mbps이상인지 확인하였다. 실험 측정결과 브리징처리 속도 3.16 초, 하드웨어 복구시간 52.21 초, 통달거리 32.26 km, 통신속도 다운로드 6.35 Mbps, 업로드 4.05 Mbps로 4 가지 실험 모두 요구기준에 충족하여 적합 판정을 받았다. 본 연구에서 실험한 통신시스템의 4가지 성능이 목표치 이상을 충족하며 개발완료된 상태로 본 연구결과는 원격 모니터링 시스템(NMS) 개발에 기여할 수 있을 것으로 기대된다.