http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
강태준,남기대,김유옥,윤영균,김상춘 ( Tae Jun Kang,Ki Dae Nam,Yu Ok Kim,Young Kyun Yun,Sang Chun Kim ) 한국공업화학회 1993 공업화학 Vol.4 No.3
올리고글리세를 모노라우레이트 에스테르류를 단계적인 합성 방법으로 monoglycerol monolaurate, diglycerol monolaurate, symmetrical triglycerol monolaurate 및 symmetrical tetraglycerol monolaurate 등을 85∼95%의 높은 수율로 각각 제조하였다. 그리고 이 화합물들에 대한 TLC 및 관크로마토그래피를 행하여 순수한 물질로 잘 분리 정제하였고, IR 및 ^1H NMR로 구조를 확인하였다. Defined oligoglycerol monolaurate esters were synthesized by means of step by step synthesis methods, and monoglycerol monolaurate, diglycerol monolaurate, symmetrical triglycerol monolaurate and symmetrical tetraglycerol monolaurate were obtained in a rate of 85∼95% yields. All the reacted products could be separated by means of column and thin layer chromatography, and the structure of products has been analyzed with IR, ^1H NMR spectra respectively.
폴리머와 계면활성제의 상호작용을 이용한 젤타입 제형의 제조
김동주 ( Dong Joo Kim ),강태준 ( Tae Jun Kang ),이천구 ( Cheon Koo Lee ),이정노 ( Jung No Lee ) 대한화장품학회 2007 대한화장품학회지 Vol.33 No.1
수용성 폴리머와 계면활성제의 상호작용을 레올로지와 표면 장력을 측정하여 연구하였다. 본 연구에 사용된 폴리머는 acrylates/C<sub>10-30</sub> alkyl acrylate crosspolymer (AC), ammonium acryloyldimethyltaurate/VP copolymer (AV)이다. 계면활성제는 PEG-40 hydrogenated castor oil (HC), polysorbate 60 (P60)이다. HC와 P60은 AC 폴리머 주위에서 마이셀을 형성하여 점도를 증가하였다. 그러나, HC는 P60보다 보다 높은 농도 범위에서 점도 증가 거동을 보였다. 같은 농도 범위에서 계면활성제들의 표면장력을 비교해보면, 표면장력이 AC/HC의 농도 증가에 따라 증가한 반면, AC/P60의 농도증가에 대해서는 거의 증가하지 않았다. 이런 결과는 AC/HC 사이의 마이셀이 강하게 조직화된 구조를 형성하기 때문으로 추정된다. The interaction between polymers and surfactants was investigated by means of rheological and surface tension measurements. The polymers used in this study were acrylates/C<sub>10-30</sub> alkyl acrylate crosspolymer (AC) and ammonium acryloyldimethyltaurate/VP copolymer (AV). And the surfactants were PEG-40 hydrogenated castor oil (HC) and polysorbate 60 (P60). HC and P60 made the micelles intervening between AC polymers, resulting in the increase of viscosity. However, HC showed a similar behavior over the wider range of surfactant concentration than P60. Regarding of surface tensions in the same range of surfactant concentration, AC/HC solution showed the area of increasing surface tension with surfactant concentration in contrast to the AC/P60 solution showing no increasing area. It is assumed that the micelles between AC/HC were formed so cooperatively and strongly that the surfactants located at the surface originally moved to the micelles.
소프트웨어 공학 : 테넌트 요구사항 기반의 클라우드 서비스 추천 방법
안영민 ( Young Min An ),강태준 ( Tae Jun Kang ),박준석 ( Joon Seok Park ),염근혁 ( Keun Hyuk Yeom ) 한국정보처리학회 2015 정보처리학회논문지. 소프트웨어 및 데이터 공학 Vol.4 No.4
클라우드 서비스가 다양해지고 그 수가 급격히 증가하면서 클라우드 서비스 사용자에게 적합한 서비스를 제공하기가 어려워지고 있다. 이러한 문제를 해결하기 위해 서비스 사용자와 제공자 사이에서 클라우드 서비스를 중개해주는 클라우드 서비스 브로커라는 개념이 제시되었다. 클라우드 서비스 브로커의 핵심적인 역할은 사용자의 요구사항에 적합한 서비스를 찾아주는 것이다. 그러나 현재 제시된 클라우드서비스 브로커 대부분은 클라우드 서비스 전문가의 도움으로 사용자의 요구사항을 분석하는 수동적인 과정이 수행되고 있으며, 체계적으로 기능적, 비기능적 요구사항을 분석하는 과정이 미흡하다. 따라서 유사한 기능을 가지고 있는 클라우드 서비스 중 사용자의 요구사항의 중요도를 분석해서 가장 근접한 서비스의 선택을 지원해줄 수 있는 요구사항 분석 기법이 필요하다. 본 논문은 AHP(Analytic Hierarchy Process)의 쌍대비교법을 응용하여 클라우드 서비스에 대한 사용자의 요구사항을 분석하고 각 서비스의 명세에 따른 점수를 계산하여 그 결과에 따라 클라우드 서비스를 선택하는 방법을 제시한다. It is difficult to provide proper cloud services for cloud users, because the number of cloud services are increasing and the type of cloud services are diversifying. To overcome this problem, the concept of cloud service broker is presented to mediate cloud services between cloud providers and tenant. The most important role of cloud service broker is to finding cloud services that fulfill requirements of tenant. However, current existing cloud service broker conduct passive requirements analysis process with cloud service expert’s assistance. In addition, the systematic functional and non-functional requirement analysis is insufficient. Therefore, we need the new methods for requirement analysis to find nearest service that matches with requirement of tenant. In this paper, we apply pairwise comparison from AHP method to analyze requirement automatically and systematically. It calculates score of service by comparing requirement with service specification, calculating importance rate, and so on.
Polyoxyethylene Dimethicone을 이용한 천연색소 치자그린의 변색방지
이동렬 ( Dong Ryul Lee ),강태준 ( Tae Jun Kang ),김기선 ( Ki Sun Kim ),이천구 ( Cheon Koo Lee ) 대한화장품학회 2006 대한화장품학회지 Vol.32 No.2
본 연구에서는 치자그린의 광에 의한 변색을 방지하는 시료를 찾고, 그 변색방지능을 기존 변색방지제와 비교하고자 했다. 치자그린 0.10 wt% 수용액을 polyoxyethylene (POE) (12) dimethicone으로 처리하여 자외선 조사하였을 때 기존 변색방지제인 methoxycinnamidopropyl hydroxysultaine으로 처리하였을 때보다 변색이 방지되는 정도가 높았다. 실험결과 POE (12) dimethicone의 변색방지능은 시료의 농도에 영향을 받는 결과를 나타내었으며 치자그린 0.10 wt% 수용액에 POE (12) dimethicone 을 1.0%로 처리하였을 때 변색방지가 되는 정도가 가장 높았다. 치자그린을 POE (12) dimethicone으로 처리한 수용액은 자외선 조사 후 흡광도 유지율이 처리 전 78%에서 95%로 높아졌으며, 실외 태양광 노출에서도 안정성이 높아지는 것으로 나타났다. 치자그린의 색소가 안정화되는 기작은 명확하게 밝혀지지는 않았으나, POE (12) dimethicone의 dimethicone기가 중요한 기능을 하는 것으로 추정된다. The objectives of this study were to find for suitable chemical reagents to use as a green-color protector for Gardenia jasminoldes Green pigment and to compare the effectiveness of these reagents for discoloration prevention. Gardenia jasminoldes Green treated with polyoxyethylene (POE) (12) dimethicone shouted a greener color than those treated with methoxycinnamidopropyl hydroxysultaine ultraviolet stabilizers after ultraviolet radiation (UVR). The experimental results exhibited that the concentration of the POE (12) dimethicone affected the effectiveness of green-color conservation. The greenest rotor was obtained by treating 0.10 wt% aquous solution of Gardenia jasminoldes Green with 1.0 wt% POE (12) dimethicone aqueous solution and the absorbances of the solutions after UVR were increased from 78% to 95% in comparison with the untreated. In addition, the Gardenia jasminoldes Green aqueous solution mixed with POE (12) dimethicone showed great green-color fastness in outdoor weathering exposure. The mechanism of the green color protection under UVR is unclear, however the dimethicone group of POE (12) dimethicone may play and important role in the stabilization.
인산 개질 바이오차와 레드머드를 이용한 비소 및 중금속 복합 오염토양 안정화
최유림 ( Yu-lim Choi ),김동수 ( Dong-su Kim ),김세희 ( Se-hee Kim ),강태준 ( Tae-jun Kang ),도지영 ( Ji-young Do ),박광진 ( Gwang-jin Park ),양재규 ( Jae-kyu Yang ),장윤영 ( Yoon-young Chang ) 한국폐기물자원순환학회(구 한국폐기물학회) 2021 한국폐기물자원순환학회 춘계학술발표논문집 Vol.2021 No.-
토양안정화기술은 토양 중 오염물질을 제거하여 함유량을 감소시키는 기존 공법과는 달리 안정화제를 오염 토양에 주입함으로써 오염물질을 안정화된 형태로 변환시켜 이동성 및 생물유효도를 저감시키는 기술이다. 토양안정화기술은 준금속 및 중금속 오염 토양에 적용이 가능하며 빠르고 간편하게 적용할 수 있으며 토양의 특성, 생태적 기능 및 부지의 용도를 유지할 수 있는 위해도 기반의 토양 오염복원기술로 알려져 있다. 레드머드는 보크사이트(bauxite) 제조 과정에서 발생하는 부산물로서 수 마이크로미터의 입자크기에 형태에 다량의 Fe<sub>2</sub>O<sub>3</sub>와 Al<sub>2</sub>O<sub>3</sub> 성분을 보유하며 강알칼리성을 가지고 있는 물질이다. 강알칼리성의 특성으로 인해 산성 오염 토양 등에 적용될 수 있으나 적용 비율이 높아지는 경우에는 토양의 pH가 작물이 밭토양의 적정 pH 보다 더 높아질 수 있다. 한편 바이오차(biochar)는 고온과 산소가 제한된 조건에서 바이오매스(biomass)를 통해 얻어지는 물질로서 높은 pH, 비표면적, 산소함유관능기를 보유하고 있어 수처리 또는 토양안정화 분야에서 널리 이용되고 있는 물질이다. 최근에는 비표면적을 넓히고 표면의 특성을 개질하거나 탄화의 필요한 온도를 낮출 수 있는 화학적 활성화 방법을 이용한 바이오차 제조가 여러 연구자들에 의해 진행되고 있다. 본 연구에서는 비소와 중금속으로 오염된 복합오염토양의 안정화를 위해 인산으로 개질된 바이오차와 레드머드를 적용하였다. 인산으로 개질된 바이오차와 레드머드의 안정화 효과를 확인하기 위해 적용 2주 후의 토양의 이화학적 특성 변화를 분석하고 비소 및 중금속 용출 시험을 실시하였다.