http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
헬리콥터용 전자식 비행제어 모델에 대한 자동빌드도구와 버전관리시스템 개발
정호채,배종민 한국지식정보기술학회 2017 한국지식정보기술학회 논문지 Vol.12 No.4
The dynamics models and the flight control models are developed on non-real time operating system environment in its first development step when we build a fly-by-wire flight control system. These models are built on a Handling Quality Simulator(HQS) in the next step which is a virtual simulator to be operated in real-time environment that is similar to the real system. A pilot makes quantitative and qualitative assessment for testing the controllability of the models operating in the HQS. In this case the model build process is complex and time consuming. Moreover it is difficult to compare the previous version of models because of the continuous model modifications. In this paper, we present design and implementation result of an auto-build tool which is used for building the flight control models and dynamic models on the top of the HQS, and also present the version management system of models which can be used for comparing models immediately. The auto-build tool can reduce model build time and enhance system reliability. It makes engineers concentrate on only model development itself. The version management system can reduce model testing time and make model insertion, modification and deletion easily. Thus our system can improve development productivity by reducing the model build and testing time.
Error-control algorithm for Digital Audio Systems
kim,Nam-Wook,kim,Yong-Deak,Jeong,Ho-Chae 亞洲大學校 1988 論文集 Vol.11 No.-
주어진 정보를 전송하거나 저장함에 있어서 정보의 신뢰성을 높이기 위해 발생하는 오류를 효과적으로 검출·정정할 수 있는 방법들이 검토되었고, CD나 DAT와 같은 디지틀 오디오 시스템에 본 방법이 적용되고 있다. 본 논문에서는 C1(32, 28, 5) 및 C2(32, 26, 7) RS부호를 사용하여 하나의 concatenated 부호를 구성하고, 본 부호의 에러 정정 과정에 대한 컴퓨터 시뮬레이션 및 오류 정정 능력의 평가를 행하여 그 결과를 도시하였으며 이 과정에는 주파수 대역에서의 Berlekamp-Massey 알고리즘, ET, 디지틀 필터링 및 인터리빙 등의 디지틀 신호 처리 이론이 사용되었다.
헬리콥터용 전자식 비행제어시스템의 조종성 평가환경 개발
박경춘,서정배,정호채 한국항공우주학회 2012 한국항공우주학회 학술발표회 논문집 Vol.2012 No.11
비행제어시스템의 성능을 평가하기 위해서는 실제 항공기와 유사한 모의환경에서의 시험이 필수적이다. 모의환경은 거의 실시간으로 동작해야 하며 실제 항공기의 조종에 필요한 모든 주변장치를 구성하고 항공기의 조종석 수준에서의 시야각이 확보되어야 한다. 특히 헬기 비행제어시스템의 경우 ADS-33-PRF(Handling Quality Requirements for Military Rotorcraft)과 같은 국제표준 규정을 적용하여 객관적이고 정량적인 평가가 가능해야 한다. 본 논문에서는 헬기 FBW 비행제어시스템의 조종성을 평가하기 위해 ADS-33-PRF에 정의된 정량적인 요구조건 평가와 조종성 레벨의 충족여부를 검증하기 위한 기동비행시험(flight test maneuvers)을 수행할 수 있는 비행 조종성 평가 환경의 설계에 대해 기술한다. Actual aircraft flight simulator is essential test environments for evaluate flight control system. Simulator environment should be performed real-time, consist of peripheral unit for flight control system, and ensured field of view similar to cockpit. Especially, rotorcraft flight control system should be apply international standard such as ADS-33 for objectively, quantitative evaluation. In this paper, describes design and implementation of Handling Quality Simulator for the rotorcraft Fly-By-Wire flight control system. Handling quality simulator which describe in this paper was include flight test maneuvers for satisfy requirement of ADS-33.
HETLAS를 활용한 헬리콥터 비행제어 법칙 Rapid Prototyping 프로세스 설계
양창덕(Chang Deok Yang),정호채(Ho-Che Jung),김창주(Chang-Joo Kim),김종섭(Chong-Sup Kim),김철호(Cheol-Ho Kim) 한국항공우주학회 2015 韓國航空宇宙學會誌 Vol.43 No.8
항공기 비행제어시스템의 개발기간, 비용 및 위험도를 최소화시키기 위해서는 비행제어법칙의 적용 및 시험을 효율적으로 수행할 수 있는 통합개발 도구와 Rapid Prototyping 프로세스가 요구된다. 본 논문에서는 Matlab/Simulink 환경을 통해 생성한 제어법칙 자동코드와 비행동역학 해석프로그램(HETLAS: HElicopter Trim, Linearization and Simulation)과의 연동 절차를 개발하여 시뮬레이션 평가를 효율적으로 수행할 수 있는 환경의 구축에 대해 기술하였다. 또한, 본 연구를 통해 제어법칙의 다양한 모드의 조종사 시뮬레이션 평가를 위해 HETLAS를 이용한 데스크탑 시뮬레이션 환경을 개발하고 조종성 시뮬레이터 및 HILS(Hardware In the Loop Simulation) 시험 환경과 효율적으로 연동하여 시험할 수 있는 절차를 개발하였다. 비행제어법칙 개발과정에서 HETLAS를 중심으로 한 해석/시험 환경을 개발함으로써 반복적인 제어법칙의 설계/해석 및 시험 절차를 효율적으로 수행할 수 있도록 하였다. The rapid prototyping process and development tool which enable the control law evaluation efficiently are needed to minimize the development cycle, cost and risk of aircraft flight control system. This paper describes a development process that integrates the designed control law into HETLAS to evaluate simulation effectively using nonlinear mathematical models. The desktop engineering simulator was developed using HETLAS for the piloted simulation evaluation of a various control modes and the procedure was developed, which quickly integrates the HETLAS into HQS(Handling Quality Simulator) and HILS(Hardware In the Loop Simulation) environments. This paper presents a rapid prototyping process using HETLAS that significantly shortens the integration process of the control law into the nonlinear math model, HETLAS, and allows the control law designs to be quickly tested in the piloted simulation and HILS environments.