http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박찬수,이강현,김명구,강수일,유재우 대한골절학회 1990 대한골절학회지 Vol.3 No.1
Clacaneal fractures involving subtalar joint can be associated with prolonged and severe disability, Many different methods have been tried for the treatment in order to search for better results. From October 1987 to October 1989, five cases of calcaneal fractures involving subtalar joint were treated by open reduction and internal fixation, and the results were as follows: 1. The causes of fractures of the calcaneus were fall from a height in all five cases. 2. The medial approach was used usually and, when the anatomical reduction was impossible by medial approach only, the lateral approach was combined. 3. The average Bohler's angle was 4.6' before reduction and 24.6 after open reduction. The Bohler's angle was increased to average 20' 4, Satisfactory results were obtained in all but one, who was not followed up for over 1 year. 5. The open reduction and internal fixation through the medial approach was valuable treatment method of the intraarticular calcaneal fracture.
朴贊洙 成均館大學校 史學會 1992 成大史林 Vol.8 No.-
유학이 정치지도이념으로 기능하던 전통사회에 있어서 제도권 교육에 대한 국가정책적인 관심은 지대하였다. 왜냐하면 교육을 바탕으로 인재선발제도인 과거제가 성립될 수 있으며, 이 과거제의 토대 위에 지배체제 내지는 관료제도가 형성되어야 국가 유지를 위한 수취체제나 관리·통제의 효율화가 가능하기 때문이다. 그러나 이같은 중요한 교육제도에 대한 학계의 관심은 그리 높지 못하였고, 따라서 연구성과도 상대적인 부진을 면할 수 없었다. 이유는 현금의 연구 경향이 결과론을 중시한 나머지 정치·경제·사회 등 현현문제에 집중되어 왔기 때문이다. 한 시대를 명확히 이해하기 위해서는 각 부문에 대한 다각적인 검토가 필요하거니와, 지배 계층 구성원의 형성 배경을 구명하려면 무엇보다 교육제도 내지 교육사연구가 필수요건이다. 이런 점에서 「한국중세 교육제도사 연구」의 출간은 빈약한 이 분야 연구에 또 하나의 실적을 축적하는 의의 있는 일이라 하겠다. 다 알고 있듯이 고려시대 교육제도에 관한 연구는 무신정권연구와 함께 저자의 주된 관심 분야였다. 본서는 저자가 1950년대부터 1980년대에 이르기까지 근 40년 동안, 학술지에 이미 발표한 교육제도 관련 논문들을 다소의 산삭을 가하여 재편집, 출간한 것이다. 따라서 수록된 일부 논지는 그간의 다른 연구결과에 의해 극복된 부분도 있지만 대부분 고려시대 교육제도연구 분야의 개척사적 의미가 있는 것들이다. 전 7장으로 구성된 본서의 내용을 보면, 1장에서 3장까지는 고려 중앙교육제도에 관한 것이고, 4장은 삼국시대부터 구한말까지의 중앙교육제도를 개괄한 내용이며, 5장에서 7장까지는 조선시대 서원에 대한 연구이다.
朴贊洙 관동대학교 1980 關大論文集 Vol.8 No.1
Plastic Moment Balancing Method is resembled to Elastic Moment Distribution Method in external appearance, but their basic concepts are very difference. In Elastic Moment Distribution Method, one must fit the moment diagram to the structure because the distribution of moments depends on relative stiffnesses of members, and can not be determined until the frame has been proportioned. On the other hand Plastic Moment Balancing Method allows one to construct a moment diagram and then proportion a frame to fit it, this can be done because the distribution of mements is according to plastic mement capacity rather than relative stiffnesses of members. In this paper, theorotical concepts are lack, because of utilization of structural design practice. And, this paper tries to see saving amounts of materials compared plastic design with elastic design.
박찬수,하옥남 朝鮮大學校 機械技術硏究所 2003 機械技術硏究 Vol.6 No.2
Fin-tube type(Fin-type) heat exchanger has been tested in order to replace the heat exchanger of parallel flow type(P.F-type) which is now used in automobile air conditioner system. The following conclusions are drawn by the comparison of the characteristics of the heat exchangers. Evaporator and condenser capacities and COPS were varied as the compressor speed, outdoor air temperature and air flow rate changed, which much influenced the characteristics of the air conditioning system. Evaporator and condenser capacities increased with increasing compressor speed and outdoor air temperature. Evaporator and condenser pressures of Fin-type decreased by 7% and 5% respectively compared with those of P.F-type. The COP of Fin-type decreased with increasing outdoor air temperature and the compressor speed. The COP of P.F-type decreased by 14% compared with t h a t of Fin-type.