http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
고상반응법을 이용한 Li<sub>2</sub>MnSiO<sub>4</sub> 합성
김지수,심중표,박경세,선호정,Kim, Ji-Su,Shim, Joong-Pyo,Park, Gyung-Se,Sun, Ho-Jung 한국전기전자재료학회 2012 전기전자재료학회논문지 Vol.25 No.5
Synthesis of $Li_2MnSiO_4$ was attempted by the conventional solid-state reaction method, and the phase formation behavior according to the change of the calcination condition was investigated. When the mixture of the three source materials, $Li_2O$, MnO and $SiO_2$ powders, were used for calcination in air, it was difficult to develop the $Li_2MnSiO_4$ phase because the oxidation number of $Mn^{2+}$ could not be maintained. Therefore, two-step calcination was applied: $Li_2SiO_3$ was made from $Li_2O$ and $SiO_2$ at the first step, and $Li_2MnSiO_4$ was synthesized from $Li_2SiO_3$ and MnO at the second step. It was easy to make $Li_2MnSiO_3$ from $Li_2O$ and $SiO_2$. $Li_2MnSiO_4$ single phase was developed by the calcination at $900^{\circ}C$ for 24 hr in Ar atmosphere as the oxidation of $Mn^{2+}$ was prevented. However, the $Li_2MnSiO_4$ was ${\gamma}-Li_2MnSiO_4$, one of the polymorph of $Li_2MnSiO_4$, which could not be used as the cathode materials in Li-ion batteries. By applying the additional low temperature annealing at $400^{\circ}C$, the single phase ${\beta}-Li_2MnSiO_4$ powder was synthesized successfully through the phase transition from ${\gamma}$ to ${\beta}$ phase.
DMFC에서 온도 및 유량이 성능에 미치는 영향에 관한 연구
김홍건(Kim, Hong-Gun),곽이구(Kwac, Lee-Ku),강영우(Kang, Young-Woo),김태진(Kim, Tae-Jin),곽상희(Kwak, Sang-Hee),안계혁(An, Kay-Hyeok),박경세(Park, Gyung-Se) 한국신재생에너지학회 2009 한국신재생에너지학회 학술대회논문집 Vol.2009 No.06
직접메탄올형 연료전지(Direct Methanol Fuel Cell)는 휴대용으로 사용할 수 있는 소형 전원용으로 주로 개발되고 있으며, 다양한 용도로 사용이 가능하다. 하지만 직접메탄올연료전지에서 전해질로 많이 쓰이는 Nafion막은 이를 통한 메탄올 크로스오버(Crossover) 때문에 연료전지의 성능을 제한시키고 있다. 본 연구에서는 Nafion 117를 사용하여 전극 면적 100cm2 의 DFMC용 MEA를 제작하고, 공기 유량을 3ml/mim으로 고정하고, 메탄올 유량을 2,3 ml/min로 각각 공기극와 연료극에 공급하여 온도변화(50, 60, 70, 80?C)에 따른 성능을 확인하였다. DMFC의 적당 반응 온도는 70?C로 생각되고, 유량은 메탄올 2ml/min, 공기 3ml/min유량 공급시가 성능이 높게 나오는 결과를 얻으나 일정시간 지나면 성능이 메탄올 3ml/min, 공기 3ml/min유량 공급시 보다 성능이 떨어지는 현상이 일어나기 때문에 70?C 반응온도에 메탄올 3ml/min, 공기 3ml/min의 유량 공급이 본 논문에서 최적화된 성능을 내는 조건으로 사료된다.