악안면 골격 형태에 따른 교합평면각의 변화에 관한 두부 방사선학적 연구

오세윤,김웅철,김지환,이준석,김진완,유진호,김태석 高麗大學校 倂設 保健大學 保健科學硏究所 1999 保健科學論集 Vol.25 No.1

A correlation analysis was made to understand the interaction between the growth patterns of some craniofacial skeletal components and occlusal plane inclination. 5 angular measurements(S.a. Ar.a, Go.a, UGo.a, LGo.a), 6 linear measurements(ACBL, PCBL, RH. MBL. AFH. PFH) and OP/SN. obtained from 83 cephalometric tracing records, were selected and the relationship between the occlusal plane angle and those measurements were analyzed statistically. Ramus Height(r=-0.55), Posterior Facial Height(r=-0.41), were found to be negatively related with Occlusal Plane angle, while Lower Gonial angle(r= 0.35), Saddle angle(r= 0.24) were found to be positively related with Occlusal Plane angle(p(0.05). The results obtained from the above analysis were further assessed with stepwise regression analysis, using Occlusal Plane angle as a dependant variable, and RH, LGo.a and S.a as explanatory variables. Stepwise regression analysis revealed that all the explanatory variables were found to be significant.(p<0.05) [OP/SN] = -8.74-0.33(RH)+0.23(S.a)+0.20(LGo.a). (R²=0.44). This stepwise regression analysis explains, to some extent, the relationship between the growth patterns of some craniofacial skeletal components and the occlusal plane inclination. 1. The inclination of Occlusal Plane angle is noticeably related with the growth patterns of some craniofacial skeletal components, i.e. RH, PFH, Saddle angle and Lower Gonial angle 2. In high Occlusal Plane angle, the Ram us Height tends to be shorter, and the Saddle angle and Lower Gonial angle tend to be obtuse.

치과기공사의 직업만족도 측정을 위한 설문도구의 개발

오세윤,김웅철,김지환,이병기,유진호,김태석,이준석,이주호 高麗大學校 倂設 保健大學 保健科學硏究所 2002 保健科學論集 Vol.28 No.2

Conflicts between individuals are quite natural and they can act as an positive contributing factor not only to the development of an individual but also to the organization to which one belongs. But too much conflicts will always induce dissatisfaction and stresses, which will be destructive and harmful to all of them, and that is why we are always tying to seek(find) out the causes for the origination of conflicts and remedies to cope with them effectively. The present study, as the first one in a series of studies which our researchers contemplate executing, was designed to develop a measure of job satisfaction for dental laboratory technicians. One job satisfaction measure and two job satisfaction related measures, one for faithfulness for the job and the other for environmental characteristics of dental laboratory were newly developed. The newly developed measures were comprised of a total of 38 items, which were each 12 items for job satisfaction and faithfulness for the job and 14 items for environmental characteristics of dental laboratory With the aid of factor analysis for principal components and categorization of items by panel of professionals, items of each measure were grouped into 2-4 subscales. Contribution to internal consistency was the fina) criterion for an item's inclusion in a subscale. Internal consistency reliability of each item was attested through the statistical analysis on the data obtained from 55 structured questionnaires. Reliability of internal consistency of subscales in each measure of job satisfaction and faithfulness for the job ranged from 0.74 to 0.79 and 0.90-0.91 respectively. The result from this research came to draw the following conclusions. 1. Validity and internal consistency reliability of all the items of each measure was attested. 2. The newly developed measure of job satisfaction was found to be appropriate for (measuring the degree of job satisfaction of) dental technicians, as well as for (other) dental office personnels.

우리나라 치과 기공사의 건강 습관에 영향을 미치는 요인

오세윤,김웅철,김지환 高麗大學校 倂設 保健大學 保健科學硏究所 1999 保健科學論集 Vol.25 No.1

This investigation was carried out to evaluate the relations between the levels of health practices and their attributable factors in Korean dental laboratory technicians A questionnaire listing six groups of health practices and their related factors was mailed to randomly selected 1,900 dental laboratory technicians. Among them, 1,344 dental laboratory technicians filled out the questionnaires and returned them. Before the start of main survey, a pilot survey was carried out for validity test of the questionnaire. All the data obtained were corded and analyzed with PC/SAS 6.12 program. The level of inappropriate health practices was the highest in irregular exercise(85.3%), and followed by smoking(61.0%), drinking of alcohol(59.1%), irregular eating habits(45.6%), inappropriate sleep duration(32.2%), and obesity(9.4%). Statistically significant factors by multiple logistic regression analyses were sex. work part in obesity: age. work area. number of employees in hours of sleeping: sex, self assessed health status, health examination, work area, work hours in eating habits: sex, marital status, education in smoking : sex in drinking of alcohol : self assessed health status : health examination, work hours in exercise '. and sex, work hours in health practice index. With the above considerations in mind, the levels of health practices in Korean dental laboratory technicians was relatively low and that was attributable to most of the sociodemographic characteristics, health examination and health status and work history. It is suggested that health promotion programs for promoting self-assessed health status, carrying out health examination, reducing work hours, and measures for elevating the level of health practice of male techinicians be necessary.

3% NaCl 水溶液中에서 複合組織鋼의 第2相 硬度 및 反復速度 變化가 腐蝕疲勞擧動에 미치는 影響

吳世旭,金雄執 東亞大學校 海洋資源硏究所 1992 硏究論文集 Vol.5 No.2

Only the 2nd phase hardness of martensite in dual phase steel which was composed of the martensite and ferrite was changed by heat treatment. The corrosion fatigeue fracture behaviors were conducted by cantilever by cantilever type of self-made roated bending fatigue testing machine at cyclic frequencies of 25Hz and 0.5Hz in 3% NaCl solution. The fatigue strength was increased as the hardness of the 2nd phase and cyclic frequency got higher. In case of 302 MPa and 25Hz , corrosion fatigue fracture behavior was effected by mechanics but in case of 137MPa and 0.5Hz. by electric-chemistry, Also it wsas effected by mechanics and corrosive dissolution of crack edge in cse more than crack length lmm at 137MPa, 0.5Hz. As cyclic frequency and stress level got lower , the relation of AK and da/dN decreased influence for changer of the 2nd phase hardness, A s stress level gor lower and hardness of the 2nd phase gor higher, the roughness of fracture surface was increased.

횡하중을 받는 SiC/Ti-15-3 MMC 복합재 계면영역에서의 탄소성 응력장분포거동(Ⅰ)

강지웅,김상태,권오헌 한국안전학회 2004 한국안전학회지 Vol.19 No.4

Unidirectional fiber-metal matrix composites have superior mechanical properties along the longitudinal direction. However, the applicability of continuous fiber reinforced MMCs is somewhat limited due to their relatively poor transverse properties. Therefore, the transverse properties of MMCs are significantly influenced by the properties of the fiber/matrix interface. In this study, the interfacial stress states of transversely loaded unidirectional fiber reinforced metal matrix composites investigated by using elastic-plastic finite element analysis. Different fiber volume fractions (5-60%) were studied numerically. The interface was treated as three thin layer (with different properties) with a finite thickness between the fiber and the matrix. The fiber is modeled as transversely isotropic linear-elastic, and the matrix as isotropic elastic-plastic material. The analyses were based on a two-dimensional generalized plane strain model of a cross-section of an unidirectional composite by the ANSYS finite element analysis code.

電子産業의 要求측면에서 본 工業高等學校 電子系列學科 敎育改善을 爲한 基礎硏究

羅聲雄,林在鳳,沈殷燮,金煥宇,權五錫 충남대학교 공업교육연구소 1982 論文集 Vol.5 No.1

This thesis aims at finding the present abilities of the graduates from Electronic Departments of Technical High schools, their present value to the Electronic Industry, and the required qualifications. The following suggestions are proposed to improve the education of Technical High schools, and to meet the needs of the future. -Such basic subjects as English, Korean(including Chinese letters), Mathematics are to be emphasized in the curricula. -Basic theory in major subjects should be broadened rather than stressing experiments and practice in specific trades. -Major subjects are to include more wide and general theories than those of the present.

핸드스프링 몸펴 앞공중1회 비틀기 동작의 소요시간 및 각운동량 분석

권오석,윤양진,서국웅 한국운동역학회 2002 한국운동역학회지 Vol.12 No.2

남자 기계체조 국가대표 선수 3명과 대학선수 3명을 대상으로 핸드스프링 몸펴 앞공중1회 비틀기 동작을 구간 및 국면별로 분석하고 동작의 숙련도에 따라 역학적 변인이 집단 간 어떠한 차이를 보이는지를 구명하기 위하여 Kwon3D 프로그램을 활용하여 분석한 결과 다음과 같은 결론을 얻었다. 시간요인에서 보폭을 크게 딛는 것이 손을 빠르게 지지 할 수 있고, 핸드스프링 체공시간은 짧게 하여야 발구르기의 압력을 높여 비틀기동작에서 체공 소요 시간이 길어지므로 비틀기 수행의 완성도를 높일 수 있는 것으로 나타났다. 각운동량 요인에서 기술수행 시 전체적으로 좌우(X)축에 대한 각운동량이 전후(Y)축과 수직(Z)축에 대한 각운동량에 비해 더 큰 값을 보였다. 좌우 축 각운동량은 지면에서 이지되어 동작을 수행하는 핸드스프링회전과 앞공중1회 비틀기에서 숙련자가 상대적으로 더 큰 각운동량 보이는 것으로 나타났다. The purpose of this study were a two-fold: ⑴ to analyze event and phase of handspring salto forward stretched with turn; ⑵ to know the differences in the kinematic variables between two groups. A Kwon3D program served for the estimation of this study. The group was divided into three National representative and three well-trained calisthenics in this study. The results of this study revealed that ⑴ the forward somersault performance was increased when duration time in the air was long during the salto forward stretched that the duration time of Handspring is short, the pressure at takeoff is high, the stride is large, and hands are supporting on the ground quickly; ⑵ comparing the angular movement of anterior and posterior y axis and vertical z axis, the angular movement of right and left x axis was higher during the performance. As a result, the national representative players showed better performance in Handspring salto forward stretched with turn.

치과기공사 국가시험 과목 타당성 연구

김웅철,이원철,손영석,오세윤,김부섭,유진호,김지환 한국보건의료인국가시험원 2005 보건의료교육평가 Vol.2 No.1

This study prepared a basic framework for the development and improvement of Korean Dental Technicians' Licensing Examination, based on actual test questions. A peer review was conducted to ensure relevance to current practices in dental technology. For the statistical analysis, 1000 dental laboratory technicians were selected; specialists in dental laboratory technology (laboratory owners, educators, etc.) were involved in creating valid and reliable questions. Results indicated that examination subjects should be divided into three categories: basic dental laboratory theory, dental laboratory specialties, and a practical examination. To ensure relevance to current practice, there should be less emphasis on basic dental laboratory theory, including health-related laws, and more emphasis on dental laboratory specialties. Introduction to dental anatomy should be separated from oral anatomy and tooth morphology; and fixed prosthodontics should be separated from crown and bridge technology and dental ceramics technology. Removable orthodontic appliance technology should be renamed 'orthodontic laboratory technology'. There should be less questions related to health related law, oral anatomy, dental hygiene, dental materials science and inlay, while the distribution ratio of questions related to tooth morphology should be maintained. There should be a decrease in the distribution ratio of questions related to crown and bridge technology, dental ceramics technology, complete dentures and removable partial dentures technology, and orthodontic laboratory technology. In the practical examination, the current multiple choice test should be replaced with tooth carving using wax or plaster. In dental laboratory specialties, subjects related to contemporary dental laboratory technology should be included in the test items.

치과 기공사들에게서 나타나는 호흡기 증상과 이의 관련 요인

김웅철,오세윤,김지환,김진완,이준석,이가영,이세훈,유진호,김태석 高麗大學校 倂設 保健大學 保健科學硏究所 2001 保健科學論集 Vol.27 No.1

This study was carried out to investigate subjective respiratory symptoms and their attributable factors in Korean dental laboratory technicians. A questionnaire was mailed to randomly selected 1,900 dental laboratory technicians. Among them, 1,344 dental technicians completed the questionnaires and returmned them. Validity and reliability tests on the questionnaires were carried out before the main survey. To investigate risk factors on respiratory subjective symptoms, we performed analysis on distribution of characteristics, and then investigated univariate analysis and multiple logistic regression analysis. The prevalence rate of wheezing, cough and phlegm, and dyspnea was 4.8%, 33.9%, 54.9%, respectively. Statistically significant factors inducing subjective respiratory symptoms by multiple logistic regression analysis were sex, smoking, exercise, health examination, work hours a day, investment gas, investment dust, metal fume, resin vapor, and asbestos dust. Considering the results above, it seems that most subjective respiratory symptoms are related with health habits and occupational environmental-related factors. The result, consideration in mind, suggest that health promotion programs for smoking cessation, regular health examination, and physical exercise in health habit, and improvement on casting and resin work in dental technological environment be necessary.

부산 체육 행정(단체조직 및 법령) 실태 및 활성화 방안

서국웅,양점홍,권오륜,이정화 釜山大學校 附設 體育科學硏究所 1996 體育科學硏究所 論文集 Vol.12 No.-

As seen above, in order to provide the measures to promote the physical fitness in Pusan, which would help build a city of health and sports in the 21st century, the field physical fitness was divided into areas of elite fitness and ordinary fitness for the purpose of studying the status of the Pusan physical fitness administration. The following conclusion was drawn for the two areas. 1) The area of elite fitness a) Increased awareness of officials in the area of physical fitness that are in line with the local autonomous government system. b) Pursuit of incorporating the associations of city and province into a corporation. c) Election of officials to fill the vacant positions and aggressive investment in facility and finance. d) Reenforcement of personnel for the officials in the office and providing measures for heightening the morale of the personnel(trainning and rotations of important positions). e) Efforts to host international and national sports events -> A festival format by incorporating the ordinary fitness. f) Creation of a Mecca for water sports. 2) The area of ordinary fitness a) Attracting policy interest in ordinary fitness using the mass media -> utilization of local broadcasting service and newspapers. b) Integration of sponsoring organization for ordinary fitness. c) Securement of professionals in the field and specialization of work. d) Cooperation in opening the fitness facilities to the public and more attention to the activities of voluntary sports groups. e) Creation of linkage and cooperation with school fitness and elite fitness in sports being sponsored. f) Promotion of water sports.