http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
해군 함정 내부공간에 대한 2.4GHz 대역의 채널 특성과 경로손실모델 분석
최대근,이정규,김영훈,김성철,Choi, Dae-Geun,Lee, Jung-Kyu,Kim, Young-Hoon,Kim, Seong-Cheol 한국통신학회 2011 韓國通信學會論文誌 Vol.36 No.11B
무선 네트워크가 요즘 들어 기술적인 도약을 이루면서 그 적용범위나 역할이 중요해지고 있다. 국방 분야에서도 무선 네트워크를 도입하여 유선의 한계를 극복하고 개선하려는 움직임도 적지 않으며 특히 현재 해군 함정 내부에서의 대부분의 통신을 유선을 이용하기 때문에 복잡하고 비효율적이다. 본 논문에서는 함정 내 무선 네트워크 구축을 위해서 일반적인 실내 전파환경과는 많은 차이점을 가지는 함정 내 격실 및 복도에 대해 전파 환경 측정실험을 실시하고 모델링을 하였다. 함체 전체가 철 구조물로 이뤄진 특수 환경인 함정 내에서 2.4GHz 대역의 주파수에 대한 CW 측정을 통해 전파환경 특성을 분석하고 함정 내부공간에 대한 전파 경로 손실 모델을 제시하며, 전파 추적 시뮬레이션 기법을 통해 측정 결과와 비교 분석하였다. 더욱이, 기존에 연구되었던 실내 전파환경에 대한 전파 경로손실 모텔과 비교 분석하여 차이점을 도출하여 함정 내 무선 네트워크의 활용방안에 대해 고찰하였다. Recently, wireless network has been playing an important role in communication system and the applications have become wider with its big technological leap. In defence sector, there are some attempts to use wireless networks to go beyond the wire system. Especially, most internal space of the warships have the wired communication system, which are complicated and inefficient. In this paper, we measure and make a channel model about the internal parts of the warship which contain compartments and corridors including many differences from general indoor environment for establishing wireless networks in warship's internal space. In the unique environment made of metal, we measure 2.4GHz signals using continuous wave(CW) and analysis the environment to present indoor path-loss model for comparing with results from the ray-tracing tool. Moreover, we draw the conclusion that the environment of warships has a wide difference from conventional environments and put the results to practical use in warship's internal space.
미세접촉인쇄기법을 이용한 다기능성 자기조립막 제작과 전자ㆍ생물소자로의 응용
최대근(Dae-Geun Choi),유형균(Seung-Man Yang),양승만(Hyung Kyun Yu),조정대(Jeongdai Jo),이응숙(Eungsug Lee) 대한기계학회 2003 대한기계학회 춘추학술대회 Vol.2003 No.4
In this work, we fabricated various 2D metallic and polymeric nanopatterns with the feature resolution of<br/> sub-micrometer scale by using the method of microcontact printing ( CP) based on soft lithography. Silicon<br/> masters for the micromolding were made by e-beam lithography. Composite poly(dimethylsiloxane) (PDMS)<br/> molds were composed of a thin, hard layer supported by soft PDMS layer. Finally, monodisperse metal or<br/> polymer particles could be obtained in the prepared pattern for the application of electronic devices.
나노임프린트를 이용한 인조 나방눈 모사 반사방지막 제작 기술
최대근(Dae-Geun Choi),이기중(Ki-Jung Lee),정준호(Jun-Ho Jeong),김기돈(Ki-Don Kim),최준혁(Jun-Hyuk Choi),이지혜(Jihye Lee),Altun Ali,이응숙(Eung-Sug Lee) 대한기계학회 2008 대한기계학회 춘추학술대회 Vol.2008 No.5
Nanoimprint (NIL) is an attracting next-generation lithography because of its merits in nanometer-scale high resolution and low process cost, and mass production. One of the useful applications using NIL is the fabrication of antireflective structure (ARS) which has a sub-wavelength nanostructure below wavelength of visible light similar to moth-eye. The efficient fabrication method of ARS is commercially valuable because it can be used in anti-glare monitor, car dashboards, and solar cells. In this work, we fabricated various nanopatterns and investigated the effect of AR on each pattern by using nanoimprint lithography. The used Ni master of pitch of 250㎚ and depth of 230㎚ was used. Nanoscale flexible PDMS molds and UV-curable PUA(polyurethane acrylate) molds were successfully replicated from Ni master. We will also present a low-cost fabrication method of nano-scale mold using plasma-induced polymer nanograss.
유도탄 서보-탄성 간섭 해석을 위한 모달 시험 결과를 활용한 구조 동특성 모델 작성 방안 연구
최대근(Dae Geun Choe),최훈석(Hoon Seok Choi),황동기(Dong Ki Hwang) 대한기계학회 2019 大韓機械學會論文集A Vol.43 No.10
고속, 고기동의 극초음속 지대공유도탄은 제어에 적용되는 센서 및 구동기와 구조물의 동특성이 연관되어 발생되는 서보-탄성 간섭 현상에 의해 유도 조종에 영향을 받을 수 있으며, 경우에 따라서는 임무 실패를 겪을 수 있다. 따라서, 유도 조종 설계자는 유도탄의 강체 거동뿐만 아니라 구조물의 탄성거동을 고려한 동특성모델의 적용이 중요하며, 이를 통해 서보-탄성 간섭 현상을 확인하고, 필요 시 제어 또는 필터링을 통해 적절하게 대응하여야 한다. 이런 관점에서 유도 조종 설계자가 활용할 수 있는 동특성 모델 작성은 중요하다. 본 논문을 통해 유도 조종 설계에 적용될 수 있는 구조 동력학적 모델을 모달 시험을 통해 획득된 모달 계수를 활용하여 구성하고, 작성된 동특성 모델을 실제 비행 시험 시 계측된 자료와 비교하여 평가하였다. The performance of hypersonic surface-to-air missile, which requires high maneuvering capability, can be influenced by the servo-elastic interaction among the onboard sensors, actuator and structural dynamic properties of missile. Sometimes, this interaction can lead to mission failure. Therefore, guidance and control designers should consider both rigid and elastic motion of missile in the design process using a proper structural dynamic model, and if necessary, provide proper control or filters to address this servo-elastic interaction. From this perspective, the use of a proper structural dynamic model in the design process is very important. In this report, a process to establish the structural dynamic model using the modal parameter from a modal test is presented, and its feasibility is evaluated using the actual flight data.
인조나노섬모 구현을 위한 탄소나노튜브(CNT) 성장용 나노패터닝 기술
정준호(JUN HO JEONG),최대근(DAE-GEUN CHOI),김기돈(KI-DON KIM),김지은(JI-EUN KIM),임현의(HYUN-EUI LIM),한창수(CHANG-SOO HAN) 대한기계학회 2005 대한기계학회 춘추학술대회 Vol.2005 No.11
In this work, we have developed nanopatterning technologies for the fabrication of a synthetic nanostereocilia. Various nanopatterning technologies including nanoimprint lithography, soft lithography, and focused ion beam (FIB) have been tried to pattern metal catalysts for carbon nanotube (CNT) growth. Catalyst nanodot patterns in the range from 50 ㎚ to 150 ㎚ could be obtained from these technologies. Finally, Patterned structures for CNT growth with high aspect ratio which were similar to natural nanocilia were fabricated with the catalyst patterns.