RS485 직렬 통신 인터페이스를 이용한 BLDC 서보 전동기의 안전운전 영역에서의 운전에 관한 연구

우광준,김장기,황규범 단국대학교 1999 論文集 Vol.34 No.-

The servo motor systems is widely applied to the position and speed control system in modern process automation. In this paper, we design the H/W interface including RS232/485 converter and the control S/W interface including RS485 communication protocol for the real time operation of BLDC servo motor using half duplex asynchronous serial communication interface(ASCI). We confirm the servo operation for servo motor system in safety operation region by monitoring the servo status from the reply data of communication protocol and the possibility of real time operation in servo motor system using DIO method as well as ASCI method by the experimental results of proposed scheme.

치은연하 파절로 치조골 소실을 동반한 상악측절치에서 orthodontic extrusive remodeling후 임플란트 식립을 통한 심미수복 : 증례보고

황수연,손원준,한영철,배광식,백승호,이우철,금기연 大韓齒科保存學會 2008 Restorative Dentistry & Endodontics Vol.33 No.1

심미적으로 중요한 전치부에서 단일 치아 임플란트를 이용한 보철수복은 임상의에게 새로운 도전과제 중의 하나가 되었다. 그러나 전치부에서 single-unit implant는 식립할 부위의 치조골 상태가 양호해야 하는데 치은연하 파절로 인해 치아 주위에 골 손실이 있는 경우 immediate implant는 심미적으로 문제를 야기할 수 있다. 따라서 본 증례는 "orthodontic extrusive remodeling"을 통해 파절치와 주위 조직을 교정적으로 정출시켜 임플란트 식립을 위한 연조직과 경조직을 증대시킨 후 임플란트 식립을 통해 상악측절치에서 성공적인 심미수복을 이룬 증례에 관한 것이다. The treatment of esthetic areas with single-tooth implants represents a new challenge for the clinician. In 1993, a modification of the forced eruption technique, called "orthodontic extrusive remodelling" was proposed as a way to augment both soft- and hard-tissue profiles at potential implant sites. This case report describes augmentation of the coronal soft and hard tissues around a fractured maxillary lateral incisor associated with alveolar bone loss, which was achieved by forced orthodontic extrusion before implant placement. Through these procedures we could reconstruct esthetics and function in a hopeless tooth diagnosed with subgingival root fracture by trauma.

니트로크라이센 유도체의 합성에 관한 연구

黃匡鎭,김진국,남현우 홍익대학교 산업기술연구소 2001 産業技術 Vol.11 No.-

In an attempt to provide a useful light-emitting material in the organic electroluminescence diode, nitrochrysene 5 was prepared by the nitration of the tetrahydrochrysene 4 using dinitrogen tetraoxide as a key step. The chrysene 4 was obtained from the methyl cinnamate in 3 steps. The mono-nitration was confirmed by the IR, ^1H-NMR and ^13C-NMR spectra of chrysene 5. The results suggest that the synthetic methods for the nitrochrysene 5 is applicable to the synthesis of various chrysene derivatives containing donor-acceptor groups at 2, 8-positions.

나프틸기를 포함하는 퓨록산 유도체의 합성

黃匡鎭,南賢祐 홍익대학교 산업기술연구소 2002 産業技術 Vol.12 No.-

Furoxan derivatives containing naphthyl group was designed and synthesised as pohtochemical nitric oxide precussor. Naphthyl furoxan 4 was prepared by the [2+3] cycloaddition of the nitrile oxide generated in situ from the iminoyl chloride 3. The preparation of iminoyl chloride 3 was proceeded from naphthyl aldehyde 1 by the reaction with N-chlorosuccinimide following oxime formation. Naphthyl furoxan 4 was irradiated on 300 nm in CH2Cl2 to give alkyne 5 confirming NO generation.

구강 악성 흑색종에서 PCNA 발현에 관한 면역조직화학적 연구

황경균,남윤우,이재일,이종호,심광섭,김명진 大韓顎顔面成形再建外科學會 2002 Maxillofacial Plastic Reconstructive Surgery Vol.24 No.6

Malignant melanoma arising from the mucosa of head and neck region was rare and showed poor prognosis. Some of malignant melanoma were transformed from benign melanotic lesion. Malignant melanoma had high cellular proliferation and rapid growth. The percentage of PCNA-positive cell (labeling index) is high in many malignant tumor. So we compared the pattern of PCNA expression in the melanotic lesion. We performed the immunohistochemical study in malignant melanoma(19 cases), benign melanotic macule(24 cases) and normal mucosa(20 cases) were diagnosed in Seoul National University Dental Hospital between 1980 and 2000. Positive PCNA staining was found mainly in malignant melanoma. The mean PCNA expression in malignant melanoma, melanotic macule, normal tissue were 29.2%, 1.4%, 0%, respectively. Significant differences in PCNA expression were noted between malignant melanoma and melanotic macule(p<0.01), normal mucosa(p<0.01). These result suggested that the PCNA expression seems to be used as a diagnostic indicator for malignancy in malignant melanoma and melanotic lesion.

낙동강 수계의 인, 질소 및 Chl.a 농도 분포 : The distributions of phosphorus, nitrogen, and chlorophyll a concentration in the Nakdong River

허우명,김범철,황길순,최광순,박원규 江原大學校 附設 環境硏究所 1996 環境硏究 Vol.13 No.-

The longitudinal variations of water quality along the mainstream of the Nak-ding River from May 1994 to October was surveyed by the measurement of chl-orophyll a, total phosphorus, total nitrogen, dissolved inorganic phosphorus, nitrate-nitrogen, ammonia-nitrogen concentration, and secchi disc transparancy. Chl. a, TP, TN, DIP, NO_(3) and NH_(3)-N concentration was maintained at high level during the investigation period. And they also showed the peak after the input of Kumho River. Chl. a concentration was increased from 14.2㎎/㎥ in May to 95.2 in October. TP ane TN concentration was maintained always above 100㎎/㎥ and 3~4㎎N/l, respectively. TN/TP ratio were less than 16 from June to September with a few exceptions. Therefore, nitrogen is the limit-ing nutrient in the Nakdong River. Trophic states were in the range of eutrophic to hypertrophic, from 60 to80.

방전관용 전극개발 및 특성에 관한 연구

안성환,황동원,최준영,송시준,전용우,박원주,이광식 영남대학교 공업기술연구소 2001 工業技術硏究所論文集 Vol.29 No.1

This paper describes the development of sputtered tungsten electrode for discharge tube by making use of Sputtering method using plasma. The Xe discharge tube was designed and fabricated by using sputtered tungsten electrode, and the ICCD(Intensified Charged Coupled Device) and monochromator were used in order to observe the discharge image distribution and to measure the signal intensity. As a result, the emission light form the electrode was spreaded almost uniformly over a wide wavelength band, and the discharge image distribution and the signal intensity show quite a uniform distribution. The emission light from the Xe discharge tube was peaked at 488[nm] and 648[nm].

수출용 축양품종 가지의 염절임 공정의 최적화

남학식,김남우,황성희,윤광섭,신승렬 한국식품저장유통학회 ( 구 한국농산물저장유통학회 ) 2003 한국식품저장유통학회지 Vol.10 No.3

가지의 수출 경쟁력 향상을 위한 한 방안으로 수출용 가지품종인 축양품종을 염가공품으로 개발하기 위하여 염절임공정을 최적화하였다. 염절임 시간, 절임온도, 염농도를 독립변수로 하고 절임 후 수분함량, 염도, 표면과 내부의 색도 등을 종속변수로 하여, 중심합성계획법으로 실험을 설계하여 최적조건을 얻고자 하였다. 수립된 이차회귀모형으로 예측식을 수립할 수 있었으며 특히 수분함량이나 염도, 표면과 내부의 L과 b 값에 대하여 높은 적합도를 보여 최적조건을 수립하기 위한 제한 변수로 선정하였다. 염농도를 중심점(30%)에서 고정시켜서 얻은 절임시간과 온도는 각각 5.5~6.5일과 13-17℃였으며, 이때의 종속변수의 제한 요건으로는 수분함량 84%이하, 염도 14%이하 표면 L값 10-20, b값 0이하, 내부 L 값은 70-75, b 값이 16-18이었다. This study was conducted to the optimize salting process of eggplant for development new product and enhancement quality for export. Three variables by five level central composite design and response surface methodology were used to determine optimum conditions for salting time, temperature and salt concentration. Optimization of the process was conducted using the combination of the moisture content, salinity and color of surface and inside of salted eggplant. The regression polynomial model was suitable (P>0.05) by Lack-of-Fit analysis with highly significant. To optimize the process, based on surface response and contour plots, the individual contour plots of the response variables were superimposed. The optimum conditions for this process were 6 days and 15℃ at 30% concentration under the optimum of restricted variables as moisture content was below 84%, salinity was below 14%, L and b value of surface were 10 to 20 and below 0, L value and b value of inside were 70 to 75 and 16 to 18.

원자력 사고후 쌀알과 배추내 ^90Sr 및 ^137Cs 농도 예측

최용호,임광묵,황원태,이한수,이창우 대한방사선 방어학회 2002 방사선방어학회지 Vol.27 No.3

원자력 사고후 시간경과에 따른 작물체내 핵종 농도를 보다 현실적으로 예측할 수 있는 방법을 수립하고 단위 건침적에 대하여 백미와 배추내 ^90Sr 및 ^137Cs의 50 년간 농도를 예측하였다. 비생육기 사고의 경우 농도는 두 핵종 모두 시간경과에 따라 서서히 감소하였고 50년 내내 ^90Sr이 ^137Cs보다 높았다. 생육기 사고의 경우 처음 1년간 농도는 비생육기 사고에 비해 대체로 ^90Sr은 최고 30 배, ^137Cs은 최고 1,000 배 정도까지 높았다. 50 년간의 누적농도는 백미에서는 비 생육기 사고의 경우 ^90Sr이, 생육기 사고의 경우 ^137Cs이 더 높았으나 배추에서는 어느 경우에나 ^90Sr이 더 높았다. 생육기 사고시 50년간의 누적농도에 대한 지배적 경로는 대체로 ^90Sr의 경우 뿌리흡수, ^137Cs의 경우 작물체 직접오염이었다. 재부유의 영향은 무시할 수 있을 정도였다. 예측 결과에 입각하여 사고 조건별로 대책의 방향을 제시하였다. A method of more realistically predicting radionuclide concentrations in crop plants varying with time after a nuclear accident was established to estimate 50 years' concentrations of ^90Sr and ^137Cs in polished rice seeds and Chinese cabbage for unit dry deposition. After non-growing season accidents, concentrations of both nuclides decreased gradually with time and ^90Sr concentrations were higher than those of ^137Cs throughout the whole period. Radionuclide concentrations in the 1st year after growing season accidents were on the whole higher than those after non-growing season accidents by factors of up to 30 for ^90Sr and up to 1,000 for ^137Cs. In polished rice seeds, the 50 years-integrated concentration was higher for ^90Sr than for ^137Cs after non-growing season accidents, whereas the opposite was true after growing season accidents. In Chinese cabbage, however, it was higher for ^90Sr than for ^137Cs after both types of the accident. Generally speaking, the dominant pathway for the integrated concentration after the growing season accident was root uptake for ^90Sr and direct plant contamination for ^137Cs. The effect of resuspension was negligible. Based on the predicted results, the direction of planning countermeasures was suggested for various accident conditions.

마스낵 제조를 위한 당절임 공정의 최적화

한주영,김남우,황성희,윤광섭,신승렬 한국식품저장유통학회 ( 구 한국농산물저장유통학회 ) 2003 한국식품저장유통학회지 Vol.10 No.3

대부분의 마는 건조분말제품으로 가공되고 있는데, 마를 다양한 가공품으로 개발하기 위한 방법의 하나로 삼투건조라는 전처리를 행하여 건조에 의한 품질손상을 억제하고 단맛으로 기호성을 높인 건조 마 제품을 얻을 수 있는 당절임 공정의 최적화를 시도하여 최적조건을 얻고자 하였다. 침지시간을 3-7시간, 온도는 20-60℃, 당농도는 30-70%로 하는 중심합성계획법으로 실험을 설계하여 최적화하였다. 이때의 종속변수로는 침지 후 수분함량, 당도, 색도, 그리고 동결건조후의 수분함량과 재수화율로 하여 분석한 결과 동결건조 후 수분함량에 대해서는 유의성이 없었다. 세 가지의 공정변수 중 온도의 영향이 가장 적어 온도를 중심으로 고정한 후 침지시간과 당농도의 최적조건을 찾은 결과, 수분함량을 66-70%, 당도를 25-30%, L 75이상, a-2.1-2.4, b를 5이상 그리고 재수화율을 200-250을 제한 조건으로 하는 조건으로 하는 영역은 5.2-5.9시간, 56-61%로 나타났다. This study was conducted to the optimize sugaring process of yam for development of new snack product and enhancement acceptability. Three variables by five level central composite design and response surface methodology were used to determine optimum conditions for sugaring time, temperature and concentration. Optimization of the process was conducted using the combination of the moisture content, solid content, color and rehydration ratio. The regression polynomial model was suitable (P>0.05) model by Lack-of-Fit analysis with highly significant. To optimize the process, based on surface response and contour plots, superimposing the individual contour plots for the response variables. The optimum conditions for this process were 5.5 hours and 58% at 40℃ under the optimum of restricted variables as moisture content was 66 to 70, solid content was 25 to 30%, L value was above 75, a value was -2.1 to -2.4, b value was above 5 and rehydration ratio was 200 to 250.