http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
합성 추출수지를 이용한 백금스크랩 침출모사액(Pt, Rh, Al, Fe)으로부터 백금 분리
한동혁,한춘,황인성,임광일,이진영,김준수,박형규 한국자원공학회 2012 한국자원공학회지 Vol.49 No.1
For the separation of Pt from platinum-scrap leaching model solutions(Pt, Rh, Al, Fe), extraction resins were synthesized and separation efficiencies were evaluated. During synthesis, the suspension polymerization method was adopted with D2EHPA and tri-butyl-phosphate(TBP) as extractants. Also, benzoyl peroxide as a starter was divided into 3 parts and injected for the uniform size and dispersion of resin particles. In case of synthetic resin with D2EHPA, almost all Fe and Al(99~100%) were extracted. Furthermore the synthetic resin with TBP extracted Pt selectively in Pt and Rh mixtures. Consequently, a small amount of synthetic resin(3~5wt%) was found enough for extractions of Fe and Al. In case of the synthetic resin with TBP, 5~10wt% of resin was enough for selective extraction of Pt(74%). 백금스크랩 침출물(백금, 로듐, 알루미늄, 철)용액으로부터 백금 분리를 위하여, 추출제 D2EHPA와 tri-butyl-phosphate(TBP)를 이용하여 현탁중합법에 기초한 추출 수지를 합성하고 분리효율을 평가하였다. 수지 합성 시 추출제의 고른 분산과 균일한 입자를 만들어 알루미늄과 철의 추출량을 증가시키고자 반응 개시제인 benzoyl peroxide(BPO)의 첨가법을 변화시켜 세 번 나누어 첨가하였다. D2EHPA를 이용하여 합성한 추출수지의 경우 백금 스크랩 침출물 내 Fe와 Al을 99~100% 추출하는 것을 확인하였다. 또한 침출물 내 잔류된 Pt와 Rh의 경우 TBP를 이용하여 합성한 추출수지가 Pt만 선택적으로 추출하는 것을 확인할 수 있었다. 두 수지 모두 55℃까지는 추출효율이 증가하나, 그 이상의 온도에서는 영향이 없는 것으로 확인되었으며, 추출수지의 첨가량에 따른 추출효율은 D2EHPA 수지의 경우 3~5%농도에서 최대 추출효율 99.5~99.9%를 확인하였고, TBP수지의 경우 5~10%농도에서 74%의 최대 추출효율을 확인하였다.
마이크로휜관 내 단상 냉각 유동 열전달 및 압력 강하 특성에 관한 실험적 연구
한동혁,이규정 대한설비공학회 2002 설비공학 논문집 Vol.14 No.3
Experiments on the single phase cooling heat transfer and pressure drop with microfin tubes were performed using water as a test fluid. Experimental data were obtained in the range of Reynolds number 3000∼40000 and Prandtl number 4∼6. The data of microfin tubes presented the characteristics of rough surface tube in pressure drop and heat transfer. Experimental data were compared with the heat transfer and friction factor correlations of smooth tubes. Heat transfer enhancements of microfin tubes were lower than pressure drop penalty factors. The helix angle is more significant parameter in both of the pressure drop and heat transfer than the relative roughness. The correlations of Nusselt number and friction factor were suggested for the tested microfin tubes. Maximum deviations between correlations and experimental data were within ±15% for Nusselt number and ±10% for friction factor.
Investigation of Single Phase Frictional Pressure Loss in Circular Micro Tubes
한동혁,이규정 대한기계학회 2006 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.20 No.8
Single phase pressure drops in micro tubes were investigated through an experimental measurement and a numerical simulation. Experimental Po was obtained in circular micro tubes with 87 and 118 ?m diameter with distilled water. Experiments were carried out in laminar flow region with varying the Re 15-450 for the 87 ?m diameter tubes and 60-1300 for the 118 ?m diameter tube. No early transition from laminar to turbulent flow was detected for the experimental range. The computational estimation of pressure drop in the 87 ?m diameter tube was performed with the aid of CFD software. Boundary conditions from experiments were used for the numerical simulation. The results of experimental and numerical studies showed a good agreement with the conventional macro theory.
한동혁,정종문 에스케이텔레콤 (주) 2014 Telecommunications Review Vol.24 No.6
본 논문에서는 재난 통신망 기술의 표준화 현황 및 앞으로의 발전 방향을 소개한다. 제I장에서는 재난 통신 기술에대한 개요와 변화하는 재난 통신 기술의 요구 사항을 소개한다. 제II장에서는 국내외 재난 통신망 기술의 동향을 살펴본다. 특히 주요 재난 통신망 기술로써 Terrestrial Trunked Radio(TETRA)와 Association of Public SafetyCommunications Officials - Project 25(APCO-P25)에 대해서 다룬다. 제III장에서는 재난 통신망의 변화하는 요구사항에 따라 LTE를 활용한 재난 통신 기술의 표준화 현황 및 나아가야 할 방향에 대해 서술하며 제IV장에서는 본 논문의 결론을 맺는다.
마이크로 휜관낸 R410A의 응축열전달 특성에 관한 실험적 연구
한동혁,조영진,이규정,박심수,Han, Dong-Hyeok,Jo, Yeong-Jin,Lee, Gyu-Jeong,Park, Sim-Su 대한기계학회 2000 大韓機械學會論文集B Vol.24 No.11
Due to the ozone depletion and global warming potentials, some refrigerants(CFx and HCFCs) have been rapidly substituted. R410A is considered as the alternative refrigerant of R22 for the air-conditioners used a home and in industry. Experiments on the condensation heat transfer characteristics inside a smooth or a micro-fin tube with R410A are performed in this study. The test tubes 7/9.52 mm in outer diameters and 3 m in length are used. Varying the mass flux of the refrigerant and the condensation temperatures, the average heat transfer coefficients and pressure drop are investigated. It is shown that the heat transfer is enhanced and the amount of pressure drops are larger in the microfin tube than the smooth tube. From the heat transfer enhancement coefficient and the pressure penalty factor, it is found that the high heat transfer enhancement coefficients are obtained in the range of small mass flux while the penalty factors are almost equal.
IoT 및 u-Office의 무선 IP 네트워크 전송을 위한 효율적 헤더 압축 기술의 분석
한동혁,조성웅,하태영,신성진,정종문 한국통신학회 2015 정보와 통신 Vol.32 No.4
유비쿼터스 정보 기술을 기반으로 다양한 업무 지원 기기간 네트워크를 형성하여 업무 처리를 지원하는 u-Office와, 지능화된 다양한 사물에 인터넷 연결성을 제공하여 지능적 서비스를 제공하는 Internet of Things(IoT)는 기하급수적으로 증가하는 다수의 객체간 통신을 수행하므로 네트워킹 자원의 최적화 기술이 필수로 뒷받침되어야 한다. 데이터 패킷의 오버헤드를 줄이고 통신 자원을 절약하기 위한 기술 연구는 다방면으로 진행되고 있으며, 특히 패킷의 오버헤드를 줄이고 통신 자원을 절약하는 패킷 헤더 압축 기술은 다양한 국제 표준이 개발되어 모바일 와이맥스(Mobile WiMAX), Long Term Evolution(LTE), IPv6 over Low power Wireless Personal Area Network(6LoWPAN) 등의 네트워크에 활용되고 있다. 본 고에서는 모바일 와이맥스, LTE, 6LoWPAN에서 각각 사용되는 패킷 헤더 압축 기술인 Payload Header Suppression(PHS), Robust Header Compression(ROHC), Header Compression(HC), Improved Header Compression(IPHC)의 개발 동향을 제시하고 각 기술의 특징을 비교 분석한다.