http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
임태규,한승기,남현우,이상건,오종배 한국뇌학회 2001 한국뇌학회지 Vol.1 No.1
본 연구에서는 내측두엽 간질(medial Temporal Lobe Epilepsy, m-TLE) 환자의 발작기 뇌파(ictal electroencephalogram; ictal EEG)를 ICA(independent component analysis)로 처리하여, 근육잡파(muscle artifact)를 비롯한 여러 잡파들의 영향이 제거된 원래의 두뇌신경계에 의한 뇌파를 재구성할 수 있음을 보였다. 또한, ICA로 추출된 4∼6Hz의 발작리듬(ictal rhythm)에 해당하는 독립성분들이 환자군에 따라서 좌우 측두엽으로 편측화된 결과를 얻었다. 이 결과를 이용하여, 좌우 측두엽에서 θ파의 파워를 편측화의 지표로서 사용할 수 있음을 보였다. In this paper, we show that various artifacts due to muscle activity or eye movement could be removed from the ictal electro-encephalogram(EEG) of medial temporal lobe epilepsy(TLE) patients using the independent component analysis(ICA). The ictal rhythms in the 4°≠6Hz are obtained, with the topographic maps localized to the left or right side temporal lobe according to the patient group. Using the power spectral density of the ictal rhythms, we show that the lateralization of m TLE is possible.
세라믹 건조로 온도 제어를 위한 가중계수를 갖는 일반형 예측제어
임태규,성원준,금영탁,송창섭 한국결정성장학회 2003 韓國結晶成長學會誌 Vol.13 No.6
The electric furnace, inside which the desired temperature is kept by the generated heat, is known to be a difficult system to control and model exactly because system parameters and response delayed time are varied as the temperature and positions are changed. In this study, the GPCEW (generalized predictive control with exponential weight), which always guarantees the stability of the closed loop system and can be effectively applied to the internally unstable system, was introduced to the ceramic drying electric furnace and was verified by showing its temperature tracking performance experimentally. 내부에 열을 가하여 원하는 온도를 유지하는 전기로는, 정확하게 제어하고 모델링을 하기 힘든 시스템이다. 왜냐하면 시스템 변수와 응답 지연 시간이 온도와 위치가 변함에 따라 변하기 때문이다. 이번 연구에서 항상 폐루프 시스템에서 안정성을 보증하고, 내부가 불안정한 시스템에 효과적으로 적용될 수 있는 가중계수를 갖는 일반형 예측 제어가 세라믹 전기로에 적용되었고, 실험을 통해 온도 추적 이행을 보임으로서 확인하였다.
임태규,이상복,노태성 한국항공우주학회 2013 한국항공우주학회 학술발표회 논문집 Vol.2013 No.11
본 연구에서는 임무속도와 고도를 만족하는 우주발사체 추진기관 최소 무게에 대한 근거를 제시하기 위해, 발사체의 성능해석과 최적화를 수행하는 프로그램을 개발하였다. 최적화 프로그램은 유전알고리즘을 사용하여 설계범위 내에서 최소의 발사체 무게를 찾도록 구성되었다. 설계변수는 발사체의 주요한 성능 파라미터인 연소실 압력, 노즐 확장비, 발사체 추력중량비로 결정하였다. 프로그램 실행 결과, 기존 발사체에 대비하여 약 4~15%의 발사체 중량감소를 확인하였으며, 연소기 형상, 터보펌프의 파워, 가스발생기 질유량 등의 최적 변수를 도출할 수 있었다. In this study, the analysis and optimization program of the propulsion system of the launch vehicle has been developed for suggestion of the basis of the minimum weight of the launch vehicle which satisfies the mission velocity and altitude. Using the genetic algorithm, the optimization program has been designed to find the minimum weight of the launch vehicle within ranges of design variables. Design variables were determined as chamber pressure, nozzle expansion ratio and launch vehicle thrust-to-weight ratio which are principal parameters of the launch vehicle. As the program execution results, 4~15% weight reductions of the launch vehicle has been estimated compared to the existing launch vehicles. It has been possible to obtain the optimal variables of thrust geometry, turbo-pump power, and gas-generator mass flow rate.
임태규,이상복,노태성 한국항공우주학회 2012 한국항공우주학회 학술발표회 논문집 Vol.2012 No.11
액체로켓엔진의 배관망 해석 모듈을 사용하여 엔진 시스템 해석을 수행하였다. 배관망 해석 모듈은 크기, 압력, 거칠기, 재질 등을 고려하여 손실압력과 무게를 계산하도록 구성하였다. 배관망의 크기에 따른 엔진 시스템 성능을 해석한 결과, 수력 직경이 커질수록 손실압력이 감소하여 비추력은 증가하고, 무게가 증가하여 추력중량비가 감소하는 양상을 확인하였다. 기존의 연소실 압력에 대한 일정 비율로 손실압력을 산출했던 것에 비해 해석의 정밀도를 높였으며, 배관망의 무게 추정이 가능하게 되었다. 본 연구의 결과를 통해, 액체로켓엔진의 예비 설계 단계에서 주어진 요구조건에 대해 적정 연소실 압력과 배관망 직경을 결정할 수 있다. An engine system analysis has been performed using an analysis module of the pipe network for the liquid rocket. The analysis module for the pipe network is designed to obtain the pressure loss and the weight by considering sizes, pressure, roughness and material properties, etc. The results of the engine system analysis according to the pipe network show that the specific impulse increases as the pressure loss decreases, and thrust-to-weight ratio decreases as the weight increases, both due to the increased hydraulic diameters. Since the analysis precision has been increased compared to the previous method that calculates the pressure loss using the certain percentage of the combustion chamber pressure, it has been possible to estimate the weight of the pipe network. The results of this study would help determining the optimum chamber pressure and the pipe network for the preliminary design requirements.
A Case of Intraspinal Gas-containing Cyst associated with Severe Lumbar Spondylosis
임태규,박찬우,이상구,김우경 대한척추신경외과학회 2011 Neurospine Vol.8 No.1
Intraspinal gas collection is rare and also can be a cause of lumbar radiculopathy. Occasionally, the gas formation makes a severe pain which results from nerve root compression. We report a patient who had a radiculopathy caused by the gascontaining cyst in L3-L4 associated with severe spondylosis.