http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
임영철 고려대학교 글로벌일본연구원 2009 일본연구 Vol.12 No.-
日本人が使っている 「国語」という言葉は、歴史の経過の中で完全に日常語として定着しており、愛着を抱く日本人も少なくない。また「国語学」の研究者の間にも、伝統ある「国語学」という名称を国際化の呼び声に乗って軽々しく変更するには忍びないという守旧的な意見があると聞いている。しかしながら、このような研究者の心性の奥底には、「国語学」は日本で独自に発展を遂げた日本特有の学問であり、したがって〈ソト〉の潮流からは超然としていられるという先入観が存在しているように思われる。 国際社会における日本、ひいては日本語の位相は、以前とは較べものにならないほど、その影響力を増している。そしてグローバル化の潮流の中で、海外の人々が日本語や日本人と交流する機会は、今後ますます増大すると考えられる。昨今、日本語教育や日本語研究は、日本国内のみならず、海外でも盛んに行なわれている。また海外研究者の業績の中には、伝統的な「国語学」の方法では発想されないような斬新なものも少なくない。日本語を個別言語として相対化して把握する視点に立つことにより、日本語に対する知見が深化するという傾向は、近年特に、顕著である。 21世紀を迎え、至るところでパラダイムの転換が求められ、国際社会は各方面でダイナミックに流動している。日本の「国語学」が伝統的に対象としてきた学問領域を尊重しつつも、ある時は伝統から自らを解放し、他領域とも活発に交流することにより、より包括性に富んだ研究が可能となるだろう。旧來の学問領域を墨守し狭い殻に閉じこもるだけに終わらない、世界に向けて開かれた日本語の <学>の建設を目指したいものである。
임영철,김종관 한국공작기계학회 2002 한국공작기계학회 추계학술대회논문집 Vol.2002 No.-
This paper has studied thermal characteristics of machine tool to develope high speed spindle and optimum design condidering the thermal deformation. Comparing the test data of temperature measurement and structural analysis data using FEM, we verifiedthe test validity and predicted thermal deformation, influence of spindle generation of heat, and established cooling system to prevent the thermal deformation. 1) The temperature rise of spindle system depends on increasing number of rotation and shows sudden doubling increment of number of rotation over 7,000rpm. 2) Oil jacket cooling can be effective cooling method below 8,000rpm but, over 8,000rpm, it shows the decrement of cooling effect. 3) Comparing FEM analysis results and revolution test results, we can confirmn approximate temperature change consequently, it is possible to simulate temperature rise and thermal distribution on the inside of spindle system. 4) We can confirm that simulated approach by FEM analysis can be effective method in thermal-appropriate design..
필터소자의 용량 저감을 고려한 다이오드 정류기의 입력LC필터 설계
임영철,정영국 한국조명전기설비학회 1998 조명·전기설비학회논문지 Vol.12 No.1
본 연구에서는 전류스트레스 및 필터소자의 용량저감을 고려한 다이오드 정류기의 입력LC필터 설계법을 기술하였다. 입력교류전류의 제3고조파 성분에 대하여 무한한 임피던스를 갖도록 LC병렬 공진회로와 출력측 직류콘덴서로 구성된 새로운 필터를 단위법(Per Unit)에 의해 설계하였다. 제안된 LC필터를 다이오드정류기에 적용하여 정상상태에서 실험한 결과, 입력교류전류의 제3고조파성분을 8.8〔%〕로 감소시켰으며, 입력역률은 종전의 표준형의 입력역률이 0.76인데 비하여 0.913으로 개선시켰다. 또한 필터소지자의 전압.전류용량감소와 함께, 설계된 입력LC필터는 다이오드 정류기계통에 악영향을 미치지 않았으며, 따라서 종래의 표준형 LC필터에 의한 방법과 비교하여 제안된 방법이 83.5〔%〕의 저용량의 필터로도 고역률의 정류가 가능함을 입증하였다. In this paper, input LC filter design of diode rectifiers considering filter V A rating reduction has been propoesd. It consisted of an input LC parallel resonent tank whose inductor and capacitor values are se$.$ lected so that the input filter presents an infinite impedance to harmonic input ac current component. The operation of proposed input filter has been analyzed in detail under steady state conditions. Performance evaluation and related design data have been provided on Per Unit basis for the proper implementation of diode rectification system. Finally, Detailed input and output current analysis has shown that the proposed input filter yield high quality input ac current waveforms, in particular, high input power factor values and more reliabilty which reducing the V A rating of passive components as compared to the standard type LC filter.filter.