http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
연제영 대한양계협회 2004 월간 양계 Vol.36 No.6
사계절이 뚜렷한 국내에서는 여름철 혹서기 사양관리를 하는 방법에 따라 산란율이나 폐사계의 발생빈도가 확연히 차이가 날 수 있다. 이러한 까닭에 기존계사에 비해 단열 및 환기문제에 있어서 보다 효과적인 무창계사라는 현대식 계사가 최근 강조되고 있는 것이다. 그러나 현재 전체 계사의 과반수 이상이 단열이 엉성하고, 완전 자연환기에 의존하는 계사는 물론 적절한 지붕단열, 일부 기계식 환기를 도입한 절충형 계사에서 사육되고 있으므로 이번 여름을 맞이하여 나름대로 대책을 세울 필요가 있다. 특히 지구 온난화 등의 환경적 요인 등을 고려할 때 해가 거듭될수록 여름은 과거 못지않은 수준일 것이라 예상되기 때문이다.
콘크리트내에 표면매입 보강된 FRP의 내화성능 향상을 위한 내화단열재 열저항성능 평가
연제영,서수연 한국구조물진단유지관리공학회 2014 한국구조물진단유지관리공학회 논문집 Vol.18 No.5
This paper presents a fire exposure test result to evaluate fire resistance capacity of retrofit method using FRP (Fiber ReinforcedPolymer) in reinforcement concrete structure. Especially, this paper focused on near-surface-mounted retrofit method; FRP ismounted into the groove after making a groove in concrete. In the test, main parameters are retrofit method and materials for fireproofing. Spray type of perlite and board type of calcium silicate were considered as external fire proof on surface while particleof calcium silicate and polymer mortar as internal one in groove. By increasing the temperature of inside heating furnace, thetransfer of temperature from surface of fire proofing material to groove in specimen was measured. As a result, fire proofing using the board of calcium silicate was more effective to delay the heat transfer from outside thanspraying with perlite. It was found that the fire proofing could resist outside temperature of 820℃ at maximum to keep thetemperature of epoxy below glass transit temperature (GTT). 본 연구에서는 철근콘크리트 구조의 FRP를 이용한 보강에서 낮은 내화성능을 개선하기 위한 방안을 찾기 위하여, 보강된 FRP의 외부를 내화보강하는 방법에 대한 내화실험을 실시하였다. 특히 철근콘크리트 부재의 피복에 홈을 형성하여 FRP를 매입하는 보강 즉, NSM보강을 대상으로 하였다. 실험에서의 주요 변수는 보강방법과 사용 내화재료로서, Perlite계 재료를 표면에 분사하여 보강하는 방법,Calcium silicate계 보드로 표면에 부착하는 방법, 그리고 추가로 홈내부에 Polymer mortar 또는 Calcium silicate조각을 삽입하여 보강하는 방법으로 보강한 뒤 가열로 내부의 온도변화에 따른 열전달을 관찰하였다. 실험결과, Perlite계 내화뿜칠로 표면을 보강하는 경우보다 Calcium Silicate계 내화보드로 표면을 보강하는 방법이 효과적인 것으로 나타났다. 홈 내부의 에폭시가 유리전이온도에 도달할 때의 외부 표면온도 820℃까지 내화단열성능을 확보할 수 있는 것으로 나타났다.
연제영 한국역사민속학회 2005 역사민속학 Vol.0 No.21
Amrita painting(甘露幀畵), which was used for the buddhist ceremony for the dead(死者儀禮), consists of three sections: the world of Buddha and Bodhisattva in the upper section, the scene of buddhist ceremony of giving food in the center section, and the vengeful spirits(冤魂), lonely spirits(孤魂), faminished spirits(餓鬼), and all sentient beings in hell(地獄衆生) at the bottom section. This study was conducted in order to investigate the Cheondo objects, especially in Amrita painting, the Chucheon objects(追薦對像) describing cycles of life which was seen at the bottom differ a little from those in another paintings and they(追薦對像) have unique characteristics which was changeable in the ways of expressing. The bottom section of the Amrita painting was not standardized, formal, but various scenes related with human's life was simply presented. This showed the Chucheon objects associated with the actual death at that time. Those who were seen as the Chucheon objects in the Amrita painting are the vengeful spirits and the lonely spirits that had lived hard and tough life which were reflected social-cultural backgrounds, and that had been dead due to the starvation and diseases from a natural calamity. Therefore, in Amrita painting, the change of the scenes at the bottom section reflects the social-cultural backgrounds, and the disaster at the time. However, the historical declination of the preserved Amrita paintings is not regular, so there are some limits not decreasing between the Chucheon objects and the age backgrounds.