http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
( D. Q. Zhang ),( C. Shi ),( J. Li ),( L. X. Gao ),( K. Y. Lee ) 한국부식방식학회(구 한국부식학회) 2017 Corrosion Science and Technology Vol.16 No.1
The corrosion behavior of a ferritic/martensitic steel T91 exposed to an aqueous solution containing chloride and sulfate ions is investigated depending on the stimulated all-volatile treatment (AVT) and under oxygenated treatment (OT) conditions. The corrosion of T91 steel under OT condition is severe, while the corrosion under AVT condition is not. The co-existence of chloride and sulfate ions has antagonistic effect on the corrosion of T91 steel in both AVT and OT conditions. Unlike to corrosion resistance in the aqueous solution, OT pretreatment provides T91 steel lower oxidation-resistance than VAT pretreatment. From scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDS) and X-ray diffraction (XRD) analysis, the lower corrosion resistance in the aqueous solution by VAT conditions possibly is due to the formation of pits. In addition, the lower oxidation resistance of T91 steel pretreated by OT conditions is explained as follows: the cracks formed during the immersion under OT conditions accelerated peeling-off rate of the oxide film.
Atomically Thin Ohmic Edge Contacts Between Two-Dimensional Materials
Guimarax303,es, Marcos H. D.,Gao, Hui,Han, Yimo,Kang, Kibum,Xie, Saien,Kim, Cheol-Joo,Muller, David A.,Ralph, Daniel C.,Park, Jiwoong American Chemical Society 2016 ACS NANO Vol.10 No.6
<P>With the decrease of the dimensions of electronic devices, the role played by electrical contacts is ever increasing, eventually coming to dominate the overall device volume and total resistance. This is especially problematic for monolayers of semiconducting transition-metal dichalcogenides (TMDs), which are promising candidates for atomically thin electronics. Ideal electrical contacts to them would require the use of similarly thin electrode materials while maintaining low contact resistances. Here we report a scalable method to fabricate ohmic graphene edge contacts to two representative monolayer TMDs, MoS<SUB>2</SUB> and WS<SUB>2</SUB>. The graphene and TMD layer are laterally connected with wafer-scale homogeneity, no observable overlap or gap, and a low average contact resistance of 30 kΩ·μm. The resulting graphene edge contacts show linear current–voltage (<I>I</I>–<I>V</I>) characteristics at room temperature, with ohmic behavior maintained down to liquid helium temperatures.</P><P><B>Graphic Abstract</B> <IMG SRC='http://pubs.acs.org/appl/literatum/publisher/achs/journals/content/ancac3/2016/ancac3.2016.10.issue-6/acsnano.6b02879/production/images/medium/nn-2016-02879m_0007.gif'></P><P><A href='http://pubs.acs.org/doi/suppl/10.1021/nn6b02879'>ACS Electronic Supporting Info</A></P>
Near-threshold photoproduction of φ mesons from deuterium
CLAS Collaboration,Qian, X.,Chen, W.,Gao, H.,Hicks, K.,Kramer, K.,Laget, J.M.,Mibe, T.,Qiang, Y.,Stepanyan, S.,Tedeschi, D.J.,Xu, W.,Adhikari, K.P.,Amaryan, M.,Anghinolfi, M.,Ball, J.,Battaglieri, M. North-Holland Pub. Co 2011 Physics letters: B Vol.696 No.4
We report the first, kinematically-complete measurement of the differential cross section of φ-meson photoproduction from deuterium near the production threshold for a proton using the CLAS detector and a tagged-photon beam in Hall B at Jefferson Lab. The measurement was carried out by a triple coincidence detection of a proton, K<SUP>+</SUP> and K<SUP>-</SUP> near the theoretical production threshold of 1.57 GeV. The extracted differential cross sections dσdt for the initial photon energy range of 1.65-1.75 GeV are consistent with predictions based on a quasifree mechanism. Our finding is different from recent LEPS results on φ-meson photoproduction from deuterium in a similar incident photon energy range, but in a different momentum transfer region.
The extraction of φ–N total cross section from d(γ,p<sup>K+</sup><sup>K−</sup>)n
Qian, X.,Chen, W.,Gao, H.,Hicks, K.,Kramer, K.,Laget, J.M.,Mibe, T.,Stepanyan, S.,Tedeschi, D.J.,Xu, W.,Adhikari, K.P.,Amaryan, M.,Anghinolfi, M.,Baghdasaryan, H.,Ball, J.,Battaglieri, M.,Batourine, V Elsevier 2009 Physics letters: B Vol.680 No.5
<P><B>Abstract</B></P><P>We report on the first measurement of the differential cross section of <I>φ</I>-meson photoproduction for the d(γ,p<SUP>K+</SUP><SUP>K−</SUP>)n exclusive reaction channel. The experiment was performed using a tagged-photon beam and the CEBAF Large Acceptance Spectrometer (CLAS) at Jefferson Lab. A combined analysis using data from the d(γ,p<SUP>K+</SUP><SUP>K−</SUP>)n channel and those from a previous publication on coherent <I>φ</I> production on the deuteron has been carried out to extract the φ−N total cross section, <SUB>σφN</SUB>. The extracted φ−N total cross section favors a value above 20 mb. This value is larger than the value extracted using vector-meson dominance models for <I>φ</I> photoproduction on the proton.</P>
Zhang, L.,Zhu, X.D.,Wang, X.F.,Li, J.L.,Gao, F.,Zhou, G.H. Asian Australasian Association of Animal Productio 2016 Animal Bioscience Vol.29 No.11
Monochromatic green light-emitting diodes (LED) light stimuli influences the posthatch growth performance of chicks. This study was undertaken with the following objectives: i) to examine whether the green LED light stimuli induces an overheating effect by determining weight loss rate of fertile eggs during incubation period; ii) to look for the development of eyes and other primary organs at different ages of embryos and newly hatched chicks. Arbor Acres fertile broiler eggs (n = 480) were randomly assigned to 3 incubation groups and exposed to continuous white light, green light, or a dark environment (control) from the first day to 19 d of incubation. The light sourced from LED lamps with the intensity of 30 lx at eggshell level. The results showed that either green or white light stimuli during incubation did not significantly affect the weight loss rate of fertile eggs, hatching time, hatchability, chick embryo, or body weight (BW), the weight percentage of heart, liver, and eyes, as well as obvious systematic abnormalities in eye weight, side-to-side, back-to-front, or corneal diameter from 15 d of embryogenesis to 6 d of posthatch (p>0.05). Compared with the dark condition, green light stimuli during incubation tended to increase feed intake (p = 0.080), improved the BW gain of chicks during 0 to 6 day posthatch (p<0.05), and increased the percentage of pectoral muscle to the BW on 3- and 6-day-old chicks. In addition, embryos or chicks in green light had lower weight percentage of yolk retention on 19 d of embryogenesis and 1 d of posthatch in comparison to those in dark or white group (p<0.05). These results suggest that providing 30 lx green LED light stimuli during incubation has no detrimental effect on the development of eyes, heart and liver of embryos and hatchlings, but does have potential benefits in terms of enhancement of the chick growth during the early posthatch stages. In addition, the fertile broiler eggs stimulated with 30 lx green LED light during incubation does not cause an overheating effect.
Q. Ma,M. Yue,W. C. Lv,H. G. Zhang,X. K. Yuan,D. T. Zhang,X. F. Zhang,J. X. Zhang,X. X. Gao 한국자기학회 2016 Journal of Magnetics Vol.21 No.1
In the present study, bulk anisotropic nanocrystalline SmCo₅ magnets were prepared by hot deformation. The effect of deformation temperature on the texture and magnetic properties are presented, based on which the mechanism of plastic deformation and texture formation during the hot deformation process is discussed. Our analyses reveal that deformation temperature is one of the most important parameters that determine the texture of SmCo5 grains. We suggest that diffusion creep plastic deformation occurs during hot deformation, which is very sensitive to the energy gain provided by an increase in temperature.
Y.C. Li,M.H. Li,M. Wang,L. Liu,X.J. Zhang,C.M. Qin,Y.F. Wang,C.B. Wu,L.N. Liu,J.C. Xu,B. J. Ding,X. D. Lin,B. J. Ding,X. D. Lin,J. F. Shan,F. K. Liu,Y. P. Zhao,T. Zhang,X. Gao 한국원자력학회 2022 Nuclear Engineering and Technology Vol.54 No.1
The suppression of high-intensity blob structures in the scrape-off layer (SOL) by ion-cyclotron range offrequencies (ICRF) power, leading to a decrease in the turbulent fluctuation level, is observed first in theExperimental Advanced Superconducting Tokamak (EAST) experiment. This suppression effect from ICRFpower injection is global in the whole SOL at EAST, i.e. blob structures both in the regions that aremagnetically connected to the active ICRF launcher and in the regions that are not connected to theactive ICRF launcher could be suppressed by ICRF power. However, more ICRF power is required to reachthe full blob structure suppression effect in the regions that are magnetically unconnected to the activelauncher than in the regions that are magnetically connected to the active launcher. Studies show that apossible reason for the blob suppression could be the enhanced Er B shear flow in the SOL, which issupported by the shaper radial gradient in the floating potential profiles sensed by the divertor probearrays with increasing ICRF power. The local RF wave power unabsorbed by the core plasma isresponsible for the modification of potential profiles in the SOL regions.
THE ELECTRON FRACTION AND THE FERMI ENERGY OF RELATIVISTIC ELECTRONS IN A NEUTRON STAR
GAO, ZHI FU,LI, X.D.,WANG, N.,PENG, Q.H. The Korean Astronomical Society 2015 天文學論叢 Vol.30 No.2
We first deduce a uniform formula forthe Fermi energy of degenerate and relativistic electrons in the weak-magnetic field approximation. Then we obtain an expression of the special solution for the electron Fermi energy through this formula, and express the electron Fermi energy as a function of electron fraction and matter density. Our method is universally suitable for relativistic electron- matter regions in neutron stars in the weak-magnetic field approximation.