http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
EFFECT OF GRASS FILTER STRIPS ON REDUCING PO4-P LOSS IN RUNOFF FROM FORAGE CROPLAND
M.W. Jung,N.C. Jo,S. H. Yoon,W. H. Kim,K.Y. Kim,S. Sung 한국유기농업학회 2011 韓國有機農業學會誌 Vol.19 No.S
The performance of grass filter strips (GFS) in abating P04-P concentrations from the forage cropland was tested in an experiment on the 10% slope in Grassland and Forages Division, National Institute of Animal Science, Rural Development Administration (RDA) from October 2007 to September 2009. Forage croplands with rye-corn double cropping system applied with chemical fertilizer and livestock manure (LM) were compared in a natural condition. The plots were hydrologically isolated Main plots consisted of the length of GFS, such as Om, 5m, 10m and 15m. Sub plots consisted of the type of LM, such as chemical fertilizer (CF), composted cattle manure (CCM) and composted swine manure (CSM). Concentrations of P04-P in surface runoff water were reduced as the length of GFS increased. Especially, GFS with 10m and 15m reduced PO4-P concentrations significantly compared to that with Om and 5m (p<0.05). The results from this study suggest that GFS improved the removal and trapping PO4-P from forage croplands.
산란계 개량에 관한 연구 1 . 순계의 생산능력 비교시험
상병찬,강만석,김동곤,한성욱 ( B . C . Sang,M . S . Kang,D . K . Kim,S . W . Han ) 한국축산학회 1980 한국축산학회지 Vol.22 No.5
This experiment was carried out to test performance of the domentic purebred fowl. The purpose of this experiment was to compare the productive performance of the purebred fowl to obtained basic materials for laying performance improvement by means of cross breeding. In this study, 1, 200 chickens was used-that is 6 purebred strains White Leghorns(720 chickens), 1 purebred strain Rhode Island Reds (120 chickens), 1 purebred strain New Hampshires (120 chickens). The results obtained in this study are as follows; 1. The average Viability of brooding, rearing and laying period was best for Rhode Island Reds and E. Strain among White Leghorns. 2. The average body weight at 8 weeks, first egg production days, 500days of age in W. L. was 546.86g. 1431.37g, 1738.34g, respectively, but there was no significant difference among. purebred strains of W. L. 3. The average Sexual maturity of 50% egg production was 170.58 days in W. L., but R. I. R. and S. N. H. were 189.94 days, 182.42days, respectively. There was significant difference at 1 % level among Strains. 4. The average hen-housed egg production was 214.16 eggs in W. L., but R. I. R. and S. N. H. were 214.22 eggs, 196.74 eggs, respectively. There was significant difference at 1% level among Strains, but the highest hen-housed egg production (231.84 eggs) was E. Strain among strains. 5. The average egg weight was 54. 48g in W. L, but R. I. R. and .S. N. H. were 56.12g, 54.90g, respectively, The highest egg weight (57.69g) was Coronial Strain of W. L. among strains. There was significant difference at 1 % Level among strains. 6. The average feed requirement was 3.01 in W. L. but R. I. R. and S. N. H. were 3.23, 3.52, respectively the highest feed requirement (2.79) was Coronial Strain of W. L. among strains. There was significant difference at 1 % level among strains. 7. On the basis of the results of this study, the productive performance was best for C. D. E. strains among W. L. and R. I. R.
박성수(Park Soung Soo),허훈(Heo Hoon),김성철(Kim Sung Chul),김상희(Kim Sang Hee),김승환(Kim Sung Hwan),박용정(Park Young Jung),최오룡(Choi O Rong),남상훈(Nam Sang Hoon),신진우(J. W. Shin),소준호(J. H. So),장원(W. Jang) 대한전기학회 2009 대한전기학회 학술대회 논문집 Vol.2009 No.7
고출력 펄스 전원으로 PFN Marx 펄스 전원공급장치를 설계 및 제작하였다. PFN Marx는 커패시터와 인덕터 그리고 스파크 갭과 전원을 공급하는 전원공급장치와 전류 인덕터로 구성하여 제작을 하였다. 여기에 사용하는 스파크 갭 스위치는 개스를 채우는 방식으로 개스의 압력을 조정하여 스위치의 스위칭 전압을 조정하여 준다. PFN Marx는 커패시터와 인덕터가 직병렬로 구성이 되며 펄스폭과 PFN의 임피던스를 결정하는 중요한 요소이다. PFN marx는 33단으로 구성을 하였으며 부하를 100Ω으로 설계 및 시뮬레이션을 통하여 제작하였다. PFN Marx 펄스 전원공급장치를 약 500 ㎸, 수백 ㎱까지 시험을 하였다. 본 논문에서는 PFN Marx 펄스전원장치의 설계 제작 및 시험에 대하여 고찰하고자 한다.
3D 적층 STS316L 소재의 저항 점용접 특성 평가
김세현(SeHyeon Kim),김민규(Min-Gyu Kim),황인성(In-Sung Hwang),김동윤(Dong-Yoon Kim),김영민(Young-Min Kim),박지용(Jiyong Park),유지영(Jiyoung Yu) 대한용접·접합학회 2021 대한용접학회 특별강연 및 학술발표대회 개요집 Vol.2021 No.11
최근 다양한 산업에서 기존 가공방식으로는 제작이 어려운 복잡형상을 3D프린팅 방식으로 제작하는 사례가 늘어나고 있다. 특히, 위상 최적화를 통한 형상 제작을 통하여 무게를 감소시키고, 부품 일체화를 통해 기존 부품 용접부의 내구성 문제를 해결할 수 있어 주목을 받고 있다. 하지만, 이러한 장점에도 불구하고, 3D프린팅 방식은 아직 대형 부품을 제작하는데, 재료 및 공정의 한계를 보이고 있어 산업 부품을 제작하기가 적합하지 않다. 이에 일부 주요한 부품을 3D프린팅 기술로 제작하고 대형 부품에 용접하여 제품을 완성하는 기술에 대한 필요성이 대두되고 있다. 따라서 본 연구에서는 대표적인 3D 적층 STS316L과 STS316L 판재 소재에 대하여 각각 동종 소재 조합으로 저항 점용접을 진행하여 3D프린팅 부품의 용접성을 비교하는 연구를 수행하였다. 전극 가압력은 350 kgf로 고정한 후, 용접 전류, 용접 시간에 따라 용접을 진행하여 저항 점용접 로브를 도출 하였다. 용접 후, 단면 분석, 인장전단강도 시험, 조직 분석, 파형 분석을 통하여, 각 소재에 대한 저항 점용접성에 대해 평가를 진행하였다. 파형 분석은 용접 중 전류, 전압 신호를 측정하여, 동저항, 전력 신호를 도출 한 후, 거동에 대한 분석을 진행하여 3D프린팅 공정의 용접성을 확인하였다.
Outcomes of patients treated with Sengstaken-Blakemore tube for uncontrolled variceal hemorrhage
( Ja Yun Choi ),( Yun Won Jo ),( Sang Soo Lee ),( Wan Soo Kim ),( Hye Won Oh ),( Cha Young Kim ),( Eun Young Yun ),( Jin Joo Kim ),( Jae Min Lee ),( Hong Jun Kim ),( Hyun Jin Kim ),( Tae Hyo Kim ),( W 대한내과학회 2018 The Korean Journal of Internal Medicine Vol.33 No.4
Background/Aims: The aim of this study was to investigate the mortality, bleeding control rate, and their associated predictors in patients treated with Sengstaken-Blakemore (SB) tube for uncontrolled variceal hemorrhage associated with hemodynamic instability or failure of endoscopic treatment. Methods: The clinical data of 66 consecutive patients with uncontrolled variceal hemorrhage treated with SB tube at Gyeongsang National University Hospital from October 2010 to October 2015 were retrospectively analyzed. Results: The overall success rate of initial hemostasis with SB tube was 75.8%, and the independent factors associated with hemostasis were non-intubated state before SB tube (odds ratio, 8.50; p = 0.007) and Child-Pugh score < 11 (odds ratio, 15.65; p = 0.022). Rebleeding rate after successful initial hemostasis with SB tube was 22.0%, and esophageal rupture occurred in 6.1%. Mortality within 30 days was 42.4%, and the related independent factors with mortality were failure of initial hemostasis with SB tube (hazard ratio, 6.24; p < 0.001) and endotracheal intubation before SB tube (hazard ratio, 2.81; p = 0.018). Conclusions: Since the era of endoscopic band ligation, SB tube might be a beneficial option as a temporary salvage treatment for uncontrolled variceal hemorrhage. However, rescue therapy had a high incidence of fatal complication and rebleeding.
압축공기를 이용한 저압 포그시스템의 온실 냉방효율 분석
남상운 ( S. W. Nam ),성인모 ( I. M. Sung ),고기혁 ( G. H. Ko ),서동욱 ( D. U. Seo ),김영식 ( Y. S. Kim ) 한국농공학회 2012 한국농공학회 학술대회초록집 Vol.2012 No.-
압축공기를 이용한 에어포그 냉방시스템의 효율적인 이용방안을 도출하기 위하여 저압 에어포그 노즐을 설치한 토마토 재배 온실에서 냉방실험을 통하여 제어방법별로 냉방효율을 분석하였다. 제어방법은 온도제어, 습도제어, 온습도제어, 타임제어로 설정하였다. 냉방효과는 평균 0.7~3.3℃, 최대 4.3~7.0℃를 보였고, 가습효과는 평균 3.5~13.5%, 최대 14.3~24.4%를 보였다. 타임제어 방식이 가장 높은 냉방효과와 가습효과를 보이는 것으로 나타났다. 온습도제어 방식이 온도제어나 습도제어와 같은 단일항목 제어에 비해서는 냉방효과와 가습효과가 높았다. 단일항목 제어에서는 습도제어가 온도제어에 비하여 냉방효과가 높았으나, 가습효과는 온도제어가 습도제어보다 높았다. 타임제어에서는 분무시간이 길수록 냉방효과와 가습효과가 높았지만 큰 차이는 없었다. 비가 내리든가 날씨가 흐려서 일사량이 매우 낮고 습도는 매우 높은 경우와 같이 외부의 기상 조건을 기준으로 시스템의 가동 여부를 판단하고, 에어포그 시스템의 제어는 타임제어로 하는 것이 효율적인 것으로 판단되었다. 에어포그 시스템의 가동 여부 판단기준 설정과 효과적인 타임제어 시간설정을 위해서는 추가적인 실험이 요망된다. 증발냉각 시스템의 냉방효율은 외기의 건습구 온도차에 대하여 실제 냉각온도(외기의 건구온도-냉각된 온도)의 백분율로 표시된다. 하지만 이 방식은 외부 공기가 패드를 통과하면서 냉각되어 실내로 공급되는 팬 앤 패드 시스템에만 적용할 수 있다. 포그 시스템에서는 냉방가능 온도를 대조구 온실의 건구온도와 냉방온실의 습구온도 차이로 하고, 실제 냉각온도를 대조구 온실과 냉방온실의 건구온도 차이로 하여 구하였다. 냉방효율은 평균 8.3~27.3%로 나타나 미국에서 실험한 고압 포그시스템 53%와 저압 포그시스템 43%에 비하여 매우 낮게 나타났다. 이 결과로 볼 때 에어포그의 경우 분무입자의 증발율이 상당히 낮을 것으로 판단된다. 하지만 우리나라와 비슷한 기후조건인 일본에서 실험한 고압 포그시스템의 냉방효율 19.7∼29.5%와 비교하면 본 실험의 타임제어에서 나타난 냉방효율 24.6∼27.3%의 경우는 매우 유사한 결과를 보인다. 이는 에어포그 시스템이 저압이지만 압축공기를 이용함으로써 고압 포그시스템과 비슷한 정도의 냉방효율을 얻을 수 있음을 알 수 있고, 노즐의 막힘 문제 등에서 유리할 것으로 판단된다.