http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
임상택(Sang-teak Lim),백순창(Soon-chang Baek),송용준(Yong-jun Song),백영태(Yeong-tae Baek),최차봉(Cha-bong Choi),송승인(Seung-in Song) 한국컴퓨터정보학회 2019 한국컴퓨터정보학회 학술발표논문집 Vol.27 No.1
본 논문에서는 화력을 이용하는 대형 파워 플랜트 설비의 미세먼지 발생량을 저감시키고 능동적으로 제어 할 수 있는 효율적인 시스템을 제안한다. 이 시스템은 기존의 고정형으로 설계된 집진기 방식의 고정부하량 한계점과 극복하고 초미세먼지 PM2.5, 미세먼지 PM10의 발생량에 따라 IoT센서 감지에 의해 지능형 알고리즘으로 효율적으로 저감 제어 처리량을 극대화하고, 미세먼지 발생량을 최소화한다. 또한 이 시스템의 차별성은 기존의 집진기에서 잡혀지지 않는 초미세먼지를 새로운 형태의 물질인 FAA(Fine-dust Adsorption Agent)를 통해 연료 연소 시 발생되는 초미세먼지 미세입자 자체를 크게 만들어 기존 설비 집진기필터에 포집되게 하는 혁신적인 방식이다. 이번 연구를 통해 350도~1000도 열원에서 작용할 수 있는 화학물질 FAA 용액(Agent)을 개발 하였으며 지능형 AI 분사장치를 통해 연료에 첨가되어 연소 시 미세먼지를 20배~50배까지 볼륨을 확대시켜 기존 집진필터에 포집될 수 있게 동작된다. 이때, 기존 설계된 집진기의 한계(부하)용량에 상관없이 미세먼지 발생량을 상황인식 반응형 알고리즘(AI제어) 통해 분사량을 능동적으로 조절하여 미세먼지 발생량을 저감하는 진보적 혁신성을 지닌다.
정성택,송은규 대한슬관절학회 1995 대한슬관절학회지 Vol.7 No.1
Among 283 cases of arthroscopic surgery of knee, 138 cases underwent arthroscopic surgery using Nd: YAG laser in the Department of Orthopedics, Chonnam University Hospital, between Feb. 1993 and May 1994, and it's results were analyzed clinically. The frequent indication for Nd: YAG laser arthroscopic surgery was meniscus injury in 100 cases, synovial pathology in 22 cases, etc. Local anesthesia using 10-30ml of 0.25% bupiv$lt;caine were performed in all 138 cases, Nd: YAG laser power was 50-55 watts and the average laser shot time was 4.2 minutes. The average arthroscopic op. Time was 34.6 min, and op. Time for partial meniscectomy was 29.3 minutes in average, partial meniscetomy I.n discoid meniscus was 44 min. in average. The complications were mild hemarthrosis in 3 cases, breakage of laser contact fiber tip in 4 cases, and articular cartilage injury by laser in 5 cases. Ln summary arthroscopic surgery using Nd: YAG laser was considered as a good and effective procedure which t.ook short op. Time, and was safe and conveniently applicable in narrov knee joint space.
Gene Targeted Mice to Study T Cell Development
Ki Duk Song(송기덕),Sang Wook Kim(김상욱),Mi Rang Lee(이미랑),Seon Ku Kim(김선구),Teak Soon Shin(신택순),Han Seok Kang(강한석),Hong Gu Lee(이홍구),Hae Yeal Jeon(전해열),Byung Wook Cho(조병욱) 한국생명과학회 2008 생명과학회지 Vol.18 No.5
T 세포의 발생은 흉선에서 이루어지는데, 골수나 태아의 간으로부터 유래한 전구세포가 여러 단계의 복잡한 발달단계를 거쳐서 단일 CD4나 CD8 분자를 세포 표면에 발현하는 성숙한 T세포로 분화하여 2차 림프기관으로 이동한다. T세포 수용체로부터 유래하는 신호와 하위 신호전달 경로는 성숙한 T 세포 및 흉선 T 세포의 발생과 분화에 중요하다. 유전자 적중 마우스를 이용한 연구들을 통해서 복잡한 T 세포 발생을 조절하는 중요한 신호전달 경로를 파악하여 메카니즘에 대한 이해가 깊게 되었다. 유전자의 발현 시기와 조직이나 세포를 고려한 신호전달을 이해하기 위해 보다 정교한 유전자 조작로 기법의 개발이 중요하다고 사료된다. T cells develop in thymus, where immature progenitors undergo multi-stage developmental processes until mature CD4+ and CD8+ single positive T cells are generated and egress out to the periphery. Signals from T cell receptor are pivotal for T cell development in thymus as well as in periphery. Gene targeted mutant mice have contributed the understanding underlying mechanisms by dissecting the signaling pathways which governing these complex processes. Development of refined mutational system will be imperative to analyze the signaling pathways by taking consideration of context of ‘timing and/or space’ of gene function.
식물세포배양기술을 이용한 약용식물 개똥쑥 세포주 유도 및 세포주 추출물의 wound healing effect
오승택(Oh, Seung-Teak),정해수(Jung, Hae Soo),조문진(Cho, Moon Jin),송미영(Song, Mi Young),모상현(Moh, Sang-Hyun),서효현(Seo, Hyo Hyun) 한국산학기술학회 2014 한국산학기술학회논문지 Vol.15 No.9
현재 많은 나라들은 자생식물을 활용한 산업소재를 개발하는 데 지대한 관심을 가지고 있다. 특히 화장품 산업은 친환경, 자연친화적인 소재를 찾는데 집중하고 있는 추세이다. 우수한 생리활성 물질을 포함한 식물을 식물세포배양기술을 이용하여 대량으로 배양하고 그 함유물을 고농도로 얻음으로 효과적인 소재로 개발하려고 노력하고 있다. 이에 본 연구는 항암, 항균, 항산화, 항염 등의 효능이 입증되어 세계적으로 주목받고 있는 개똥쑥을 선택하여 식물세포배양기술을 이용해 유도한 캘러스의 화장품 소재로서의 가능성을 확인하고자 하였다. 약 6개월 동안 식물세포배양기술로 개똥쑥 캘러스를 유도 하였고, 유도된 캘러스를 얻어 열수 및 에탄올 추출하여 약 2개월간 다양한 효능을 시험하였다. HPLC 분석을 통하여 열수 및 에탄올 추출물의 유효성분에 차이를 보임을 확인하였다. 또한 효능평가에서도 차이를 보였다. 개똥쑥 캘러스 에탄올 추출 물을 처리하였을 경우 항염관련 단백질인 COX-2의 발현을 50% 이상 감소시키고 wound healing assay를 통해 상처 치유능 이 70%정도 증가함을 확인하였다. 이를 통해 개똥쑥 캘러스 추출물이 자연친화적, 친환경적인 소재로써 항염 및 상처치료 관련 제품에 기여할 것으로 예상된다. Currently, many countries have an interest in developing cosmetics materials using native plants. In this aspect, there is increasing need to develop cosmetics materials using native plants in our county. In the present study, calluses were induced from Artemisia annua Linne, which was highlighted because of its useful effects, such as anti-cancer, anti-fungal and anti-inflammation. Water and ethanol extractions were performed from the calluses of Artemisia annua Linne. After the mass production of Artemisia annua Linne's calluses, water and ethanol extraction was performed to examine its functional roles in healing wounds and inflammation. The differences in the effective elements were observed in the ethanol extract. The callus showed anti-inflammation activity through the suppression of the inflammation-related gene, COX-2, and ethanol extracts showed their ability to heal wounds. Overall, these results suggest that the extract of Artemisia annua Linne’s calluses is a natural and environment-friendly material, and can be used as medical supplies associated with anti-inflammation and healing wounds.
송두환(Doo-Hwan Song),김윤광(Yun-Kwang Kim),김택수(Teak-Soo Kim),김상환(Sang-Hwan Kim) 한국청정기술학회 2016 청정기술 Vol.22 No.3
석탄 광산의 심부화 및 운행갱도의 증가로 인한 온도상승으로 작업환경이 점차 악화되는 광산에서 작업환경의 개선을 위하여 A광업소를 대상으로 통기평가를 하였으며 갱내의 통기 효율을 증가시키기 위하여 작업장의 온도 저하를 위한 선풍기 통기 방식에 대해 유동해석 프로그램을 이용하여 통기방식에 따른 운반갱도의 온도분포를 해석하였다. 연구결과 A 광업소의 소요환기량은 17,831 ㎥ min<SUP>-1</SUP>으로 산출되었으며, 실제 총 입기량은 16,474 ㎥ min<SUP>-1</SUP>로 환기량이 1,357 ㎥ min<SUP>-1</SUP> 부족한 것으로 나타났고 운반갱도에서 작업장까지의 온도는 송기식 통기보다 배기식 통기방식이 2~3℃ 낮게 분포하였다. 운반갱도에서 작업장까지의 길이가 긴 경우 송기식 보다는 배기식 통기방식을 운용 하는 것이 더욱 효과적일 것이다. The working environment is deteriorated due to a rise in temperature of a coal mine caused by increase of its depth and carriage tunnels. To improve the environment, the temperature distribution resulted by using the fan type ventilation system aiming for the temperature drop is calculated by using a fluid dynamic analysis program. The analysis shows that A coal mine needs 6,152 ㎥ min<SUP>-1</SUP> for in-flow ventilation rate but the total input air flowrate is 4,710 ㎥ min<SUP>-1</SUP>, 1,442 ㎥ min<SUP>-1</SUP> of in-flow ventilation rate shortage and the temperature between the carriage tunnel openings and the workings with exhausting ventilation system type is 2~3 ℃ less than that with blowing ventilation system type. The exhausting ventilation system type would be more effective than blowing ventilation system when the distance between the carriage tunnel openings and the workings is relatively far.