Al고압주조공법에서 사출슬리브 온도 조절을 통한 Chill layer의 최적 제어

박진영,김억수,박용호,박익민,Park, Jin-Young,Kim, Eok-Soo,Park, Yong-Ho,Park, Ik-Min 한국재료학회 2006 한국재료학회지 Vol.16 No.11

In this study, the effect of chill layers occurred in shot sleeve on the molten metal filling was analyzed through computer simulation. The behavior of chill layers with temperature variation of shot sleeve set from 200 to $280^{\circ}C$ was also investigated. The simulation results showed the chill layers set in the in-gates during the injection process change the main filling direction and cause turbulent flow pattern, resulting in porosities inside the castings. The amount of chill layers with the increasing temperature of shot sleeve was considerably reduced. Particularly, at the setting temperature of $280^{\circ}C$ by heat control unit, the biggest reduction in chill layers, excellent trimmed surface and the highest density were achieved, suggesting that as the optimal sleeve condition in aluminum high pressure diecasting, especially for highly complex parts like valve body.

진동 자극 유무에 따른 호흡 저항 훈련 시 폐 기능과 호흡근의 즉각적인 차이가 있을까?

박진영,김예슬,박현주,이명모,Park, Jin-Young,Kim, Ye-Seul,Park, Hyun-Ju,Lee, Myung-Mo 대한물리치료과학회 2018 대한물리치료과학회지 Vol.25 No.3

Purpose: The purpose of this study was to investigate the effect of whole body vibration combined breathing resistance on lung capacity and respiratory muscle and to suggest a mediation method for improvement of respiratory function and lung function in the future. Methods: This study was a preliminary study design of two groups of 54 healthy young adults who were randomly assigned to an experimental group (n=27) with core exercise combined with respiratory resistance and whole body vibration and a control group with respiratory resistance and core exercise (n=27). All interventions consisted of 6 core exercises every 40 seconds and rest for 20 seconds. To compare the effects of intervention, we measured spirometry and respiratory muscle strength. Results: Both the experimental group and the control group showed a significant increase in Forced vital capacity (FVC) and Maximum voluntary ventilation (MVV) (p<.05). However, FEV1 and FEV1% were significantly increase only in the experimental group (p<.05). FVC, FEV1%, Maximum Inspiratory Pressure (MIP), Maximum Expiratory Pressure (MEP) showed more significant increase in the experimental group than the control group. Conclusion: These findings indicate that whole-body vibration combined breathing resistance is an effective intervention for people, with FVC, FEV1%, MIP, MEP increase.

퉁퉁마디를 가해하는 퉁퉁마디뿔나방 Scrobipalpa salinella (Zeller) (나비목, 뿔나방과)의 재발견 및 피해

박진영,박규택,Park, Jin-Young,Park, Kyu-Tek 한국응용곤충학회 2008 한국응용곤충학회지 Vol.47 No.4

전남 신안군의 퉁퉁마디 재배지에서 대 발생하여 피해를 초래한 해충이 뿔나방과의 Scrobipalpa salinella (Zeller)로 확인되었다. 본 종은 Park & Ponomarenko (2006)에 의해 국내에서 처음 보고된 바 있다. 그러나 동정이 어려운 암컷 한 개체를 대상으로 하였으며, 염생식물이 없는 산간지역에서 발견된 점 등으로 분포에 대한 의문점이 상존해 왔었으나 금번 조사결과로 국내 분포가 재 확인되었다. 종의 분류동정을 위한 성충과 생식기의 사진 제공과 함께 유충의 발생 및 피해에 대해 조사된 내용을 기술하였다. In a cultivated field of Salicornia europae in the Jeonam Province, Korea, Scrobipalpa salinella (Lepidoptera, Gelechiidae) which feeds and leads to a serious damage was found. The discovery of this species is to reconfirm its distribution in Korea because the first report by Park and Ponomarenko (2006) was based on a single female and it was collected in a montane area far from seaside where its host plants, halophytes, are planted. For identification, photos of imago and genitalia are given, and the damage by larvae on Salicornia europae are noted.

국부가압 다이캐스팅 공정에서 3차원 유동 및 응고해석을 통한 자동차 변속기 Gear Housing의 주조방안 설계 최적화

박진영,김억수,박용호,박익민,Park, Jin-Young,Kim, Eok-Soo,Park, Yong-Ho,Park, Ik-Min 한국재료학회 2006 한국재료학회지 Vol.16 No.11

In the partial squeeze casting process, the filling behavior of liquid metal and solidification pattern in thick area have significant influence on the quality of casting products and die life. For the optimal casting design of automobile transmission gear housing, various analyses were performed in this study by using computer simulation code, MAGMAsoft and the simulation results were compared and analyzed with experimental results. By air pressure criteria, internal porosities caused by air entrap during the mold filling were predicted and reduced remarkably by modification of gating system. Also, optimal squeeze-time lag to apply partial squeeze pin in thick area was calculated and the castings was free from shrinkage defects with the result of solidification analysis. Consequently, casting design for automobile transmission gear housing was optimized and approved by Computer Tomography.

아동기에 주의력결핍 과잉행동증상을 경험한 성인의 정신병리와 기질 성격 요인

송열매(Yul-Mai Song),이건석(Kounseok Lee),한덕현(Doug Hyun Han),이영식(Young Sik Lee),민경준(Kyung Joon Min),박진영(Jin Young Park),김준원(Jun Won Kim) 대한소아청소년정신의학회 2013 소아청소년정신의학 Vol.24 No.4

Objectives:The objective of this study is to find out the differences in psychopathology, temperament, and character factors between young adults with and without childhood attention-deficit hyperactivity disorder (ADHD) symptoms. Methods:The subjects consisted of 314 university students (male=72, female=242) in Gongju. They were divided into childhood ADHD group (N=54) and normal group (N=260) to the Wender-Utah Rating Scale. Participants were assessed using Korean Adult ADHD Scale, Beck Depression Inventory-II, Beck Anxiety Inventory, Kimberly Young’s Internet Addiction Test, Barratt Impulsiveness Scale, Paranoia Scale, Korean-Schizotypal Ambivalence Scale, Lubben Social Network Scale, and Temperament and Character Inventory-Revised. Descriptive statistics, t-test, chi-square, spearman correlation, and stepwise multiple regression were applied to analyze the data. Results:Participants with childhood ADHD symptoms had high level of adult ADHD symptoms (p<.001), impulsiveness(p=.001), depression (p<.001), anxiety (p<.001), internet addiction (p<.001), paranoia tendency (p<.001) and low level of selfesteem (p<.001) compared to normal group. Self-directedness (p<.001) was lower, Harm avoidance (p=.001) and Self-transcendence (p=.029) were higher in the childhood ADHD group. In correlation and stepwise multiple regression, childhood ADHD symptoms were significantly associated with cooperativeness (r=-0.515 and β=-0.547, p<.001 respectively). Conclusion:This result showed that young adults with childhood ADHD symptoms had various forms of psychopathology and childhood ADHD symptoms were influenced by character such as cooperativeness. Therefore, more thorough evaluation regarding childhood ADHD symptoms is needed.

주관절 질환의 관절경적 치료

박진영,금정섭,이석하,Park, Jin-Young,Geum, Jeong-Seop,Lee, Seok-Ha 대한관절경학회 2007 대한관절경학회지 Vol.11 No.2

Revision of Failed Shoulder Instability Repair

박진영,최진형,Park, Jin-Young,Choe, J.H. 대한관절경학회 2006 대한관절경학회지 Vol.10 No.1

고속 고밀도 WDM 광전송 시스템에서의 ASK-SSB와 PSK-SSB 변조 방식의 성능 분석

박진영,최윤희,박상규,Park Jin-Young,Choi Yoon-Hee,Park Sang-Gyu 대한전자공학회 2004 電子工學會論文誌-TC (Telecommunications) Vol.41 No.12

This research investigates the performance of the optical transmissions systems using the SSB modulation format The focus was on the spectral efficiency of the WDM systems and the transmission penalties due to the fiber nonlinearities. By investigating the performance obtained with ideal SSB signal, we set the upper limit of the performance which can be obtained by SSB technology. Furthermore, we investigated the performance obtainable with SSB signals which can be generated with realizable devices. Since SSB formats are more susceptible to the fiber nonlinearities, SSB formats exhibited inferior transmission performances compared to the DSB format. However, within the 500~1000 km transmission range, which is the focus of this research, it was found that the WDM systems with 12.5 GHz channel spacings might benefit from the SSB modulation techniques. 본 논문에서는 SSB 변조를 이용한 광전송 시스템의 주파수 효율성 및 비선형성에 대한 저항성 등을 규명하였다. 이상적인 SSB 신호를 사용하여 도달할 수 있는 성능의 한계를 확인하는 한편, 실제 제작이 가능한 SSB 변조기가 생성할 수 있는 신호에서 얻을 수 있는 성능을 컴퓨터 시뮬레이션을 통하여 살펴보았다. 이를 통해 SSB 변조된 신호는 일반적으로 DSB 변조된 신호에 비해서 광섬유의 비선형성에 취약하나 본 연구에서 목표로 삼고 있는 전송거리가 500~1000 km 미만인 12.5 GHz 채널 간격의 WDM 시스템에서는 SSB 신호가 DSB 신호에 비해 우수한 성능을 보일 수 있음을 확인하였다.

실패한 견관절 불안정증의 봉합술에 대한 재수술

박진영,박홍근,오정환,Park, Jin-Young,Park, Hong-Geun,Oh, Jeong-Hwan 대한관절경학회 2006 대한관절경학회지 Vol.10 No.2

불안정성 견관절에 대한 진단과 치료는 정형외과 영역에서 가장 어려운 분야 중에 하나이다. 관절와 위에서 움직이는 상완골두의 아탈구와 정상적인 전이, 통증과 기능 저하를 일으키는 이완의 정도는 구별하기가 용이하지 않는 경우가 많다. 불행하게도 이 불안정성을 일으키는 모든 병변에 시행할 수 있는 가장 좋은 한가지의 치료법은 개발되어 있지 않다. 그러므로 불안정성의 방향과 정도뿐만 아니라 동반된 문제까지도 정확히 진단하는 것이 절대 필요하다. 해부학적 결손은 반드시 확인해야 한다. 불안정성에 대한 봉합술의 실패에 영향을 미칠 수 잇는 흔한 요인은 다음과 같다. 정확한 해부학적 병리소견을 확인하는 올바른 진단, 올바른 치료 방법에 대한 이유, 필요 없는 내고정물의 사용이나 불안정성, 관절염, 신경 및 혈관 손상 등을 남길 수 있는 도달법의 사용과 같은 기술적 결함 등이 있다. 술후 견관절의 안정성, 유연성, 지구력을 회복시켜 강도높은 스포츠나 노동에 복귀할 수 있는 잘 준비된 재활을 통해 추가적인 손상을 막아야 한다. Diagnosis and treatment of the unstable shoulder is one of the more difficult problems in orthopaedic surgery. There is confusion between the normal laxity with translation and subluxation of the humeral head relative to the glenoid and an abnormal amount of laxity, leading to pain and dysfunction. Unfortunately, there is no single treatment that applied to all lesions that cause the instability. It is imperative, therefore, that an accurate diagnosis be made, including the directions and degree of shoulder instability as well as any coexisting problems. Anatomical defects must be defined. Common factors that could most readily compromised instability repair are examined. These include techniques for making an accurate diagnosis with identification of the precise anatomical pathology, and the rationale for appropriate surgical treatment with the avoidance of technical complication such as unnecessary hardware or exposures that might lead to residual instability, arthritis, and nerve or vascular injuries. Additional injuries may be prevented by careful rehabilitation postoperatively to restore shoulder stability, flexibility, and endurance prior to an individual's return to stressful sports or work.

소아 복부둔상에 의한 간장손상의 치료

박진영,장수일,Park, Jin-Young,Chang, Soo-Il 대한소아외과학회 1997 소아외과 Vol.3 No.1

A clinical review was done of 31 children with blunt liver injury who were admitted to the Department of Surgery, Kyungpook National University Hospital between 1981 and 1990. Seventeen of the 31 children required laparotomy(11 primary repairs, 4 lobectomies, 2 segmentectomies). There were two deaths after laparotomy, one due to associated severe head injury and another due to multiorgan failure. The remaining 14 children, who were hemodynamically stable after initial resuscitation and who did not have signs of other associated intraabdominal injuries, were managed by nonoperative treatment. Patients were observed in a pediatric intensive care unit for at least 48 hours with repeated abdominal clinical evaluations, laboratory studies, and monitoring of vital signs. The hospital courses in all cases were uneventful and there were no late complication. A follow-up computed tomography of 7 patients showed resolution of the injury in all. The authors believe that, for children with blunt liver injuries, nonoperative management is safe and appropriate if carried out under careful continuous surgical observation in a pediatric intensive care unit.