Hepatic Cirrhosis Occurring in a Young Woodchuck(Marmota monax) Due to Vertical Transmission of Woodchuck Hepatitis Virus(WHV)

Kyu-shik Jeong,정원일,Jae-yong Chung,Mi-young An,Chae-yong Jung,Gyoung-jae Lee,Jong-soo Kang,Byeong-cheol Kang,Young-heun Jee,Bruce H Williams,Young-oh Kwon,Da-hee Jeong 대한수의학회 2003 Journal of Veterinary Science Vol.4 No.2

Cirrhosis Occurring in a Young Woodchuck (Marmota monax) Due to Vertical Transmission of Woodchuck Hepatitis Virus (WHV)Da-hee Jeong, Won-il Jeong, Jae-yong Chung, Mi-young An, Chae-yong Jung, Gyoung-jae Lee1, Jong-soo Kang1, Byeong-cheol Kang2, Young-heun Jee3, Bruce H Williams4, Young-oh Kwon5 and Kyu-shik Jeong*College of Veterinary Medicine, Kyungpook National University, Daegu 702-701, Korea1Shinwon Scientific Co., LTD, Research Institute, Suwon, Korea2Clinical Research Institute, Seoul National University, Seoul 110-744, Korea3College of Veterinary Medicine, Jeju National University, Jeju 690-756, Korea

성격평가 질문지의 조증척도 요인구조 : 정신과 환자집단 자료를 중심으로

오자영,노승호,김재현,오상우 圓光大學校 醫科學硏究所 2005 圓光醫科學 Vol.20 No.2

대체에너지원으로서 국내 산림바이오매스 자원의 잠재력과 이용가능성

차두송,오재헌,우종춘 江原大學校 森林科學硏究所 2004 Journal of Forest Science Vol.20 No.-

본 연구에서는 대체에너지로서의 바이오매스에너지원의 정의와 특성 등을 살펴보고, 국내에서의 바이오매스 에너지원의 잠재력과 이용가능성에 대해서 검토하였다. 특히 임지잔재, 간벌재 등의 목질바이오매스는 자원량이 풍부하고, 임업·임산업의 활성화와 인공림의 간벌작업을 촉진하여 산림의 공익적 기능을 증대시킬 수 있는 에너지 자원으로서, 앞으로 지속적인 산림관리를 위한 새로운 임업의 과제가 될 것으로 판단된다. This study aims to study the definition and characteristics of forest biomass as an alternative energy and to estimate the energy potential and feasibility of forest biomass utilization in domestic. Especially, significant attention is given to woody biomass such as forest residue, thinning log, etc. due to their renewable, sustainable and abundant properties. The results were summarized as follows. The utilization of these forest biomass could play an important role to activate the forest industry and increase the public benefit functions of forest. but more attention on their utilization is required and how they can be utilize more efficiently is the new task assigned to our forestry for sustainable forest management.

임도의 환경요인에 따른 임도구조의 변화

차두송,최병구,고성대,오재헌 江原大學校 森林科學硏究所 2004 Journal of Forest Science Vol.20 No.-

본 연구는 산악지형에 적합한 임도노선을 개발하기 위한 기초 자료를 제공하기 위하여, 강원도 지역에 있어서 물리적으로 안정된 임도를 대상으로 지역별, 산지경사별, 토성별, 개설위치별에 따른 사면경사, 사명길이, 노폭 등의 임도구조요인의 변화에 대하여 분석하였다. 지역별 임도구조는 성토길이만 유의적인 차이가 없는 것으로 나타났으며, 그 이외의 지역은 각각 차이를 보이고 있었다. 산지경사별 임도구조는 노폭, 종단물매, 성토길이, 절토길이는 유의적인 차이가 보이지 않았으며, 성토경사는 30°이하·30~35°와 40°이상에서, 절토경사는 모든 지역에서 차이를 나타내고 있었다. 또한 토성별 임도구조는 노폭, 종단물매, 성토길이는 유의적인 차이가 없었으며, 그 이외의 요인은 서로 차이가 있는 것으로 나타났다. 개설위치에 따른 임도구조 변화는 절토경사는 유의적인 차이가 없는 것으로, 그 이외의 요인은 차이가 있는 것으로 나타났다. To provide the basic informations related to forest road construction of mountainous terrain, we analyzed changes of the road structure factors such as banking and cutting slope gradients, slope length, road width by the environmental factors such as locations, slope gradients, soil types, road position on physically stabilized forest roads constructed in Gangwon-do. All factors related to the road structures by locations were significant except for banking slope length. Road width, longitudinal gradients, banking and cutting slope length by slope gradients were not significantly different and banking slope gradients in the range less than 30°, from 30° to 35° and more than 40° and cutting slope gradients were significantly different for all areas. Road width, longitudinal gradients, banking slope length by soil types were not significantly different and others were significantly different. All factors related to the road structures by road position were significant except for cutting slope gradients.

원형톱에 의한 속성수 절단 소요 동력에 관한 연구

최윤성 ( Yun Sung Choi ),김대현 ( Dae Hyun Kim ),오재헌 ( Jae Heun Oh1 ) 한국임학회 2014 산림과학 공동학술대회 논문집 Vol.2014 No.-

본 연구에서는, 단벌기 바이오매스 생산림(Short rotation forest, SRF)에 식재되어 있는 속성수인 이태리포플러( Populus euramericana)을 이용하여 수확 시 소요되는 동력을 측정하여 수확기계동력원을 선정하기 위한 기초자료를 제공하기 위하여 수행되었다. 실험 수준은 밀기속도(0.41, 1.25,2.5 m/s) 3수준, 절단속도(800, 1,000, 1,200 rpm) 3수준, 직경(50, 70, 90, 110, 130 ㎜) 5수준으로 선정하였다. 실험결과, 밀기속도에 따른 최대토크는 0.41 m/s 일 때 30.4 N-m, 최소동력은 191.37 W로나타났다. 밀기속도 1.25 m/s 일 때 최대토크와 최소동력은 각각 30.1 N-m, 194.88 W, 2.5 m/s 일때 최대토크와 최소동력은 각각 31.9 N-m, 204.10 W로 나타났다. 또한 밀기속도 0.41 m/s 보다 2.5m/s 일 때 최대토크는 각각 4.8, 10, 7.2%, 최소동력은 6.8, 10, 11.8%가 증가하였으며, 밀기속도 0.41m/s 인 경우보다 6.8% 많은 동력을 필요로 하는 것으로 나타났다. 따라서, 실험결과를 바탕으로 측정된 소요 동력 기준으로 수확기계의 동력원을 선정할 수 있을 것으로 판단된다. In this study, Italy poplar( Populus euramericana) was selected for test specimen to measure cutting power when it harvested. Three levels of feed rate (0.41, 1.25, 2.5 m/s), three levels of sawing speed (800, 1,000, 1,200 rpm), and five levels of stem diameter (50, 70, 90, 110, 130 ㎜) were used as test variables. As results, the maximum torque, 30.4 N-m for feed rate 0.41 m/s, the minimum power, 191.37 W. The maximum torque and power, such as 30.1 N-m, 191.37 W for feed rate 1.25 m/s. The maximum torque and power, such as 31.9 N-m, 204.10 W for feed rate 2.5 m/s. Also, feed rate 0.41 m/s than feed rate 1.25 m/s, the maximum torque such as 4.8, 10, 7.2%, minimum power 6.8, 10, 11.8% increased. The feed rate 0.41 m/s than 6.7% many power to required. Using the results of this experiment as the base, The measured power source of the power requirements by the harvesting machine is determined to be able to select.

A Study on Tractive Resistance Prediction of Logging machine

Oh, Jae-Heun,Cha Du-Song 강원대학교 삼림과학연구소 2001 Journal of Forest Science Vol.17 No.-

본 연구는 지면끌기집재에 사용되는 기계에 의해 견인되는 견인목의 견인저항을 예측하기 위해 견인목의 중량, 견인저항계수, 지면의 경사 등의 함수로 표현된 수학적 모델들을 개발하였다. 또한 만능재료시험기와 토양조를 이용한 실험실조건에서 4개 수종(잣나무, 일본잎갈나무, 신갈나무, 굴참나무)의 견인저항계수를 산출하였다. 산출한 견인저항계수와 가상 조건을 이용하여 개발된 3가지의 수학적 견인저항 모델에 적용하였다. 그 결과 견인목 중량에 대한 견인저항력의 비(T/Wt)는 지면의 경사가 증가할수록 전형적으로 증가하였으며, 반지면끌기집재가 지면끌기집재보다 견인저항력이 더 작게 나타났다. 본 연구의 결과는 집재작업기계의 선정과 집재윈치의 동력요구량 산정엔 기본적인 자료로 활용할 수 있을 것이다. This study was conducted to predict the tractive resistance for tree length logs being skidded by ground based logging machine. The mathematical models for predicting the tractive resistance of tree length log have been developed. The tractive resistance is expressed as a function of log weight, skidding coefficient, and ground gradient. The skidding coefficients for four species of Korean pine, Japanese larch, mongolian oak, and cork oak were determined under laboratory condition using universal testing machine and small soil bin, Three different tractive resistance models were applied to four species and compared with each other. The ratios (T/Wt) of skidding-line tensions to the skidding log weight increased linearly with increment in ground gradient. Semi-ground skidding generally required smaller tensions than ground skidding under given condition. Results of this study can be utilized as basic information for logging machine selection and power requirement of skidding winch. Key words ; Tractive resistance, ground skidding, forest machine, logging machine, forest machanization

Ride Quality of Forestry Vehicles

( Jae Heun Oh ),( Bum Jin Park ),( Kazuhiro Aruga ),( Toshio Nitami ),( Hiroshi Kobayashi ),( Du Song Cha ) 한국임학회 2003 한국임학회 학술발표논문집 Vol.2003 No.-

Simulation of Forest Ground Roughness

( Jae Heun Oh ),( Byoung Koo Choi ),( Du Song Cha ) 한국임학회 2004 한국임학회 학술발표논문집 Vol.2004 No.-

Fuel Properties of Woody Pellets in Domestic Markets of Korea

Jae-Heun Oh,Jin-Sung Hwang,Du-Song Cha 강원대학교 산림과학연구소 2014 Journal of Forest Science Vol.30 No.4

This study investigated physical properties and combustion gas characteristics for 8 types of wood pellets (4 domestic and 4 imported products) distributed in the domestic market. Results showed that most pellet types were first-grade pellets in the wood pellet quality standards in Korea with the exception of 3 pellet types from K company (second-grade in mechanical durability), G company (off-grade in nitrogen content) and P company (second-grade in ash percentage). Mixed pellets which contained more lignin and sap content were higher in mechanical durability (%) than that of white pellets. From the combustion gas analysis results, NOx emitted from all pellets combustion was at acceptable levels for national emission standard of the Clean Air Conservation Act except for pellets from G company. In addition, CO levels from all types of wood pellets were acceptable except for pellets from D company and domestic pellets were higher CO levels than imported pellets. These results indicate the higher CO levels in domestic pellets due to the usage of forest thinning materials including logging debris which usually had the high content of bark.

Dynamic simulation of rubber tracked mini-forwarder

( Jae Heun Oh ),( Kyoung Jin Shin ),( Du Song Cha ) 한국임학회 2004 한국임학회 학술발표논문집 Vol.2004 No.-