http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
SET에 의한 folded cascode comparator 분석
장재석(Jae-Seok Jang),정재필(Jae-Pil Chung),박정철(Jung-Cheul Park) 한국정보전자통신기술학회 2020 한국정보전자통신기술학회논문지 Vol.13 No.2
본 논문은 SET에 노출된 전자기기는 불규칙한 작동 및 출력 오류를 나타낼 수 있으므로 집적회로에서 SET 상황에 대해서 연구하였다. 폴디드 캐스코드 비교기에서 지수정류파(iexp)을 이용하여 SET 환경을 설정하였다. 비교기가 SET에 의해 어떤 영향이 있는지에 대해 실험하였다. SET현상을 발생시키지 않은 폴디드 비교기에서는 전파 지연은 0.26㎲, 이득은 0.649으로 측정되었다. SET현상을 발생시킨 폴디드 비교기에서 출력단과 가까운 MOSFET는 민감하게 측정되었으며 전파 지연은 0.36~0.37㎲,이득은 0.649로 계산되었다. 중간에 위치한 MOSFET는 0.28~0.30㎲, 이득은 0.649로 계산되었다. 폴디드 비교기에서 출력단과 가장 멀리 떨어져 있는 MOSFET는 전파지연이 0.25~0.26㎲, 이득은 0.649로 계산되었다. SET 환경에서, 폴디드 비교기에서 출력부분에 가까이 있는 MOSFET는 민감하였다. 그리고 출력부분과 멀리 떨어져 있는 MOSFET에서는 SET를 입력하지 않은 정상적인 폴디드 비교기와 같은 결과를 얻었다. This paper studied the SET situation in VLSI because the electronic devices exposed to SET can indicate irregular operation and output errors. The SET environment was established using the exponential static wave (iexp) in the fold-cascode comparator. The comparator was experimented with how it affected it by the SET. In a folded comparator that did not enter the SET situation, the propagation delay was measured at 0.26㎲ and the gain was 0.649. The MOSFET close to the output stage was measured sensitively in the folded comparator that entered the SET situation. And propagation delay was calculated from 0.36 to 0.37㎲ and the gain was 0.649. The mid-position MOSFET was calculated from 0.28 to 0.30㎲ and the gain was 0.649. The MOSFET, which is farthest from the output stage from the folded comparator, was calculated with the propagation delay between 0.25 and 0.26㎲ and the gain of 0.649. In SET situations, the MOSFET close to the output portion of the folded comparator was sensitive. And at the MOSFET far from the output, the same results were obtained as a normal folded comparator without the SET input.
OTDR을 이용한 실리콘 오일 기반의 광섬유 온도 센서
장재석(Jae Seok Jang),유욱재(Wook Jae Yoo),신상훈(Sang Hun Shin),이동은(Dong Eun Lee),김민건(Mingeon Kim),김혜진(Hye Jin Kim),송영범(Young Beom Song),장경원(Kyoung Won Jang),조승현(Seunghyun Cho),이봉수(Bongsoo Lee) 대한전기학회 2015 전기학회논문지 Vol.64 No.11
In this study, we developed a fiber-optic temperature sensor (FOTS) based on a silicone oil and an optical time domain reflectometer (OTDR) to apply the measurement of a coolant leakage in the nuclear power plant. The sensing probe of the FOTS consists of a silicone oil, a stainless steel cap, a FC terminator, and a single mode optical fiber. Fresnel reflection arising at the interface between the silicone oil and the single mode optical fiber in the sensing probe is changed by varying the refractive index of the silicone oil according to the temperature. Therefore, we measured the optical power of the light signals reflected from the sensing probe. The measurable temperature range of the FOTS using a Cu-coated silica fiber is from 70℃ to 340℃ and the maximum operation temperature of the FOTS is sufficient for usage at the secondary system in the nuclear power plant.
AutoEncoder 기반 역난독화 사전학습 및 전이학습을 통한 악성코드 탐지 방법론
장재석 ( Jae-seok Jang ),구본재 ( Bon-jae Ku ),엄성준 ( Sung-jun Eom ),한지형 ( Ji-hyeong Han ) 한국정보처리학회 2022 한국정보처리학회 학술대회논문집 Vol.29 No.2
악성코드를 분석하는 기존 기법인 정적분석은 빠르고 효율적으로 악성코드를 탐지할 수 있지만 난독화된 파일에 취약한 반면,, 동적분석은 난독화된 파일에 적합하지만 느리고 비용이 많이 든다는 단점을 가진다. 본 연구에서는 두 분석 기법의 단점을 해결하기 위해 딥러닝 모델을 활용한 난독화에 강한 정적분석 모델을 제안하였다. 본 연구에서 제안한 방법은 원본 코드 및 난독화된 파일을 grayscale 이미지로 변환하여 데이터셋을 구축하고 AutoEncoder 를 사전학습시켜 encoder 가 원본 파일과 난독화된 파일로부터 원본 파일의 특징을 추출할 수 있도록 한 이후, encoder 의 output 을 fully connected layer 의 입력으로 넣고 전이학습시켜 악성코드를 탐지하도록 하였다. 본 연구에서는 제안한 방법론은 난독화된 파일에서 악성코드를 탐지하는 성능을 F1 score 기준 14.17% 포인트 향상시켰고, 난독화된 파일과 원본 파일을 전체를 합친 데이터셋에서도 악성코드 탐지 성능을 F1 score 기준 7.22% 포인트 향상시켰다.
태권도지도자에 대한 공정성 인식이 선수들의 리더신뢰와 태권도지속의사에 미치는 영향
장재석 ( Jang Jae-seok ),이병관 ( Lee Byung-kwan ),이석준 ( Lee Suk-jun ) 국기원 2020 국기원태권도연구 Vol.11 No.4
이 연구의 목적은 태권도지도자의 공정성이 리더신뢰 및 태권도지속의사에 미치는 영향을 규명하는 데 있다. 연구의 목적을 달성하기 위해 2018년도 서울특별시, 경기도, 충청남도, 경상남도, 전라남도, 부산광역시에 소재한 중등학교(중학교, 고등학교)에 재학 중인 태권도선수들을 대상으로 하였다. 편의표본추출법으로 자료를 수집하였으며, 최종분석에는 394명의 자료가 사용되었다. 통계방법은 빈도분석, Cronbach’s α검사와 확인적 요인분석, 상관관계분석, 다중 및 단순회귀분석을 실시하였으며, 그 결과는 다음과 같다. 태권도지도자의 공정성은 리더신뢰에 정(+)의 영향을 미치는 것으로 나타났다. 하위 요인인 분배공정성, 절차공정성, 상호작용공정성 모두가 정(+)의 영향을 미치며, 그중 상호작용공정성이 리더신뢰에 가장 큰 영력을 행사하였다. 둘째, 태권도지도자의 공정성은 태권도지속의사에 정(+)의 영향을 미치는 것으로 나타났다. 공정성의 하위요인인 분배공정성, 절차공정성, 상호작용공정성 모두 정(+)의 영향을 미치며, 그중 분배공정성이 태권도지속의사에 가장 큰 영력을 행사하였다. 셋째, 리더신뢰는 태권도지속의사에 정(+)의 영향을 미치는 것으로 나타났다. 이는 태권도선수가 태권도 활동에 지속시키기 위해서는 선수에게 신뢰 형성이 무엇보다 중요함을 시사한다. 따라서 태권도지도자의 공정성은 선수들이 리더를 신뢰하게 하고, 태권도를 지속하는 데 중요 요인으로 작용을 하므로 지도자는 공정한 팀 관리로 자신의 신뢰감 증대와 더불어 선수들의 태권도 지속성을 강화시켜야 함을 시사해 주고 있다. This study was aimed to investigate the effects of the justice of Taekwondo leaders on leader trust and Taekwondo continuance intention. The research subjects were collected from Taekwondo players in secondary schools located in Seoul, Gyeonggi, Chungnam, Gyeongnam, Cheonnam, and Busan in 2018. The data was collected using the standard sampling method, and the final analysis was based on the responses of 389 student Taekwondo players. For data processing, regression analysis was used to verify the hypothesis. The following conclusions were obtained as results through those methods and procedures. First, leader’s justice has a positive effect on leader trust. Second, it was proved that leaders’ justice has a positive effect on players’ Taekwondo continuance intention. Third, players’ trust in their leader has a positive effect on Taekwondo continuance intention. The mediating effect of leader trust with the justice and Taekwondo continuance was proved to exist through the research, which suggests that Taekwondo leaders perform fair leadership to improve the players’ leader trust and Taekwondo continuance.
자이로센서와 플렉스 센서를 이용한 이동형 로봇팔 원격 제어
장재석(Jae-Seok Jang),김민수(Min-Soo Kim),김성진(Seong-Jin Kim),이철근(Cheol-Keun Lee),박형근(Hyoung-Keun Park) 한국전자통신학회 2021 한국전자통신학회 논문지 Vol.16 No.6
재난상황이나 인명 구조, 위험물 처리와 위험지역 정찰 등 사람들이 하기 어려운 위험작업을 대신 처리해 실질적으로 많은 도움을 줄 수 있는 로봇들이 지속적으로 이슈가 되고 있다. 따라서 본 논문에서는 사람의 모션 의지를 로봇팔에 구현하여 상황에 따른 능동적인 대응이 가능하도록 한다. 또한 손동작에 따라 차량을 제어하여 이동성을 부여할 수 있는 이동형 로봇팔을 구현하고자 한다. 플렉스 센서와 자이로센서를 활용하여 컨트롤러를 제작하고 자이로센서 2개의 Roll과 Pitch 값을 조절하여 로봇팔의 각도를 제어하며 차량의 방향을 지정한다. 또한 플렉스 센서 3개의 레벨을 지정함으로써 손동작에 따라 모터가 동작되며 물체를 집고 이동할 수 있도록 로봇팔을 구현하였다. Robots that can actually help people a lot by dealing with dangerous tasks that are difficult for people to do, such as disaster situations, lifesaving, handling dangerous goods, and reconnaissance of dangerous areas, continue to become an issue. Therefore, in this paper, we intend to implement a mobile robot arm that can implement a human motion will on the robot arm to enable active response according to the situation and control the vehicle according to hand movements to give mobility. A controller is manufactured using a flex sensor and agyro sensor, and the roll and pitch values of the two gyro sensors are adjusted to control the angle of the robot arm and specify the vehicle direction. In addition, by designating the levels of the three flex sensors, the motor is operated according to hand movements, and a robot arm is implemented so that objects can be picked up and moved.