http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
UCHIDA, Etsuo,CHOI, Seon‐,Gyu,BABA, Daisuke,WAKISAKA, Yusuke Blackwell Publishing Asia 2012 Resource geology Vol.62 No.3
<P><B>Abstract</B></P><P>We investigated the Jurassic Daebo and Cretaceous Bulguksa granitic rocks in South Korea. The former are distributed mainly in the Gyeonggi and Yeongnam massifs and the latter are present in the Gyeongsan basin and Ogcheon belt. The Daebo granitic rocks generally are of ilmenite series and I to S type. These rocks are associated with Au–Ag hydrothermal deposits, whereas the Bulguksa granitic rocks are of magnetite series and I type, and are associated with Pb–Zn, Cu and Mo–W hydrothermal deposits, as well as Au–Ag hydrothermal deposits. The Daebo granitic rocks show adakitic signatures in their chemical compositions. They are considered to have been derived from partial melting of the thick lower continental crust. Conversely, the Bulguksa granitic rocks in the Gyeongsan basin are non‐adakitic and are considered to have been derived from partial melting of a mantle wedge. Magmas of the Daebo granitic rocks formed at relatively shallow levels, but solidified at deep levels compared with those of the Bulguksa granitic rocks. The Bulguksa granitic rocks in the central to western Ogcheon belt are considered to have been formed by fractionation of magmas derived from partial melting of continental crust. The total Al contents of biotite and hornblende in the granitic rocks increased, with the Bulguksa granitic rocks in the Gyeongsan basin < the Bulguksa granitic rocks in the Ogcheon belt and Gyeonggi and Yeongnam massifs and the Daebo granitic rocks in the Ogcheon belt < the Daebo granitic rocks in the Gyeonggi and Yeongnam massifs. This order corresponds to an increase in solidification depth.</P>
Fatigue Strength of Angle Shape Shear Connector used in Steel-Concrete Composite Slab
최성민,Kazuo Tateishi,Daisuke Uchida,Koichi Asano,Kiyoshi Kobayashi 한국강구조학회 2008 International Journal of Steel Structures Vol.8 No.3
Fatigue strength of welded joint between angle shape shear connector and bottom plate in steel-concrete composite slab was investigated by fatigue tests. Fatigue tests were performed on push-out shear specimens. Local stress around the welded joint was also investigated by FEA. In fatigue tests, fatigue cracks initiated and propagated at the welded toe. The fatigue cracks were caused by stress concentration at the welded joints due to the local bending deformation of bottom plate. This local bending deformation was analytically simulated by FEA carried out on slab members in practice. After these investigations, it was confirmed the stress level at the welded joint was small and much less than the fatigue limit even when the design truck loads were applied.
Ryo Harada,Hironari Kato,Soichiro Fushimi,Hirofumi Inoue,Daisuke Uchida,Yutaka Akimoto,Takeshi Tomoda,Kazuyuki Matsumoto,Yasuhiro Noma,Naoki Yamamoto,Shigeru Horiguchi,Koichiro Tsutsumi,Hiroyuki Okada 대한소화기내시경학회 2019 Clinical Endoscopy Vol.52 No.4
Background/Aims: We applied a back light system (BLS) with a magnifying glass to improve the ability to assess the adequacy ofspecimen sampling using endosonography. We conducted this study to evaluate the effcacy of the BLS in sampling of specimens byendoscopic ultrasound-guided fine needle aspiration of solid pancreatic masses. Methods: This was a prospective, randomized, crossover, single-center clinical trial. An endosonographer evaluated adequacy on grossvisual inspection and identified whitish specimen sampling sites with and without the BLS according to a randomization sequence inthe first and second passes with a 25-G needle. On cytological evaluation, the presence of well-defined pancreatic ductal epithelium wasevaluated by a cytopathologist who was blinded to any clinical information. Results: A total of 80 consecutive patients were eligible during the study period. Adequacy was observed for 52 specimens (65%) withthe BLS and 54 (68%) without the BLS (p=0.88). In assessment of specimen adequacy on gross examination, only fair agreement wasobserved both with and without BLS (kappa score 0.40 and 0.29, respectively). Conclusions: The BLS did not influence the ability to identify specimen sampling sites or reliable assessment of specimen site adequacyusing gross visual inspection.
Shigenobu Kainuma,Muye Yang,정영수,Susumu Inokuchi,Atsunori Kawabata,Daisuke Uchida 한국강구조학회 2018 International Journal of Steel Structures Vol.18 No.2
The fatigue problems in orthotropic steel decks have raised widely concerns in recent years. This study focused on the root crack mechanism at rib-to-deck welded joints, based on the previous test results of sectional specimens and the matching FE analysis, the fatigue behaviors of structure detail were investigated by considering the eff ect of root gap shapes, weld penetrations, and plate thicknesses on crack initiation. Besides, various root crack depths were simulated in models to clarify the stress variations occurring during the propagation stage under cyclic loading. The results showed that the root gap shape and penetration rate have an impact on the root cracking direction and fatigue life at the initiation stage, but seem not directly related to the crack propagation mechanism; the higher penetration rate is advantageous for the prevention of root crack initiation. However, although the stiff ness increased with the increase in plate thickness, the fatigue life of crack initiation might be reduced owing to the low fatigue strength of the thick deck plate, whereas the U-rib thickness has limited eff ect on the stress response of the root tip. Moreover, the signifi cant diff erence between the 8 mm-crack model and other crack models is the high stress concentration around the crack tip. The stress conditions of root tip would be changed under loading cycles when a root crack propagated into half of deck plate thickness. Finally, the eff ect of structural dimensions on fatigue strength were also compared according to test results and FEA.
Kazuyuki Matsumoto,Hironari Kato,Shigeru Horiguchi,Takeshi Tomoda,Akihiro Matsumi,Yuki Ishihara,Yosuke Saragai,Saimon Takada,Shinichiro Muro,Daisuke Uchida,Hiroyuki Okada 거트앤리버 소화기연관학회협의회 2020 Gut and Liver Vol.14 No.5
Background/Aims: Endoscopic ultrasound (EUS)-guided fine needle aspiration (FNA; EUS-FNA) allows for diagnostic tissue specimens from various regions to be analyzed. However, diagnosing recurrent pancreaticobiliary cancer after surgery is sometimes difficult. We evaluated the efficacy of EUS-FNA in the diagnosis of local recurrence of pancreaticobiliary cancer and analyzed the factors associated with falsenegative results. Methods: Fifty-one consecutive patients who underwent EUS-FNA due to suspected recurrence of pancreaticobiliary cancer after surgery in an academic center were retrospectively analyzed. The criteria for EUS-FNA were a resected margin or remnant pancreas mass, round swollen lymph node (≥10 mm in diameter), and soft-tissue enhancement around a major artery. Patients with suspected liver metastasis or malignant ascites were excluded. Results: Thirty-nine of the 51 patients had pancreatic cancer; the remaining 12 had biliary cancer. The target sites for EUS-FNA were the soft tissue around a major artery (n=22, 43%), the resected margin or remnant pancreas (n=12, 24%), and the lymph nodes (n=17, 33%). The median size of the suspected recurrent lesions was 15 mm (range, 8 to 40 mm). The overall sensitivity, specificity and accuracy of EUS-FNA for the diagnosis of recurrence was 84% (32/38), 100% (13/13), and 88% (45/51), respectively. FNA of the soft tissue around major arteries (odds ratio, 8.23; 95% confidence interval, 1.2 to 166.7; p=0.033) was significantly associated with a falsenegative diagnosis in the multivariate analysis. Conclusions: EUS-FNA is useful for diagnosing recurrent cancer, even after pancreaticobiliary surgery. The diagnoses of recurrence at soft-tissue sites should be interpreted with caution.
Yuki Fujii,Kazuyuki Matsumoto,Hironari Kato,Yosuke Saragai,Saimon Takada,Sho Mizukawa,Shinichiro Muro,Daisuke Uchida,Takeshi Tomoda,Shigeru Horiguchi,Noriyuki Tanaka,Hiroyuki Okada 대한소화기내시경학회 2019 Clinical Endoscopy Vol.52 No.5
Background/Aims: This study aimed to examine the diagnostic ability of endoscopic ultrasonography (EUS) for major vascularinvasion in pancreatic cancer and to evaluate the relationship between EUS findings and pathological distance. Methods: In total, 57 consecutive patients who underwent EUS for pancreatic cancer before surgery were retrospectively reviewed. EUSimage findings were divided into four types according to the relationship between the tumor and major vessel (types 1 and 2: invasion,types 3 and 4: non-invasion). We also compared the EUS findings and pathologically measured distances between the tumors andevaluated vessels. Results: The sensitivity, specificity, and accuracy of EUS diagnosis for vascular invasion were 89%, 92%, and 91%, respectively, in theveins and 83%, 94%, and 93%, respectively, in the arteries. The pathologically evaluated distances of cases with type 2 EUS findings weresignificantly shorter than those of cases with type 3 EUS findings in both the major veins (median [interquartile range], 96 [0–742] µmvs. 2,833 [1,076–5,694] µm, p=0.012) and arteries (623 [0–854] µm vs. 3,097 [1,396–6,000] µm, p=0.0061). All cases with a distance of≥1,000 µm between the tumors and main vessels were correctly diagnosed. Conclusions: Tumors at a distance ≥1,000 µm from the main vessels were correctly diagnosed by EUS.