http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
강명순,최성주,박현,Kang, Myung-Soon,Choi, Seong-Joo,Park, Hyun 대한기계학회 1986 대한기계학회논문집 Vol.10 No.6
본 논문에서는 에너지 법칙(energy principle)에 기초한 AE RMS값과 절삭 파 라미터들 사이의 해석적인 관계를 구하기 위하여 Lee와 Shaffer의 미끄름선장 영역을 변형되는 부피로 가정하여 이론적인 식을 제시하였으며 Al의 2차원 절삭시험을 통하여 이 관계가 절삭과정의 감시에 유용하리라는 것을 확인하였다. This study reviewed the theory of acoustic emission applying generation of acoustic emission in metal cutting and proposed a relationship between fundamental cutting parameters and the root mean square (RMS) voltage of the acoustic emission on the basis of the mechanics of the orthogonal cutting operation. Experimental results are presented for 6063-T5 Auminum and the validity of this relationship is evaluated by a series of tests varying cutting speed, feed rate and rake angle in orthogonal cutting. The original formula derived theoretically has been modified in order to utilize independent of fundamental cutting parameters. RMS voltage of acoustic emission depends on cutting speed and strain rate, but it is not much affected by feed rate. Applying lubricant, the drop of RMS level has been observed.
반도체공정의 Tubing 내 잔여가스제거 지적결정시스템
임사환,허용정,최성주,이종락,Lee, Sa-Hwan,Huh, Yong-Jeong,Choi, Seong-Joo,Lee, Jong-Rark 한국반도체디스플레이기술학회 2006 반도체디스플레이기술학회지 Vol.5 No.4
Semiconductor industry has been dramatically developed with the information era of 21C, and the trend now is to consider that the technology of management system of the computer utility that has a high efficiency is important. This study investigated the intelligent decision system for residual gas purge process to effectively remove the residual gas in the tube after replacing the cylinder that is used for the gas cabinet or BSGS(Bulk Specialty Gas Supply System) of the semiconductor process. It was suggest from this study that it is possible to decide the type, frequency and volume of purge gas using various toxic gases which is necessary for each process. Also, this result will be utilized for operating the system, increasing the efficiency of management and saving energy.
스마트팩토리 구축을 위한 PLC기반의 필드버스 교육 장비 및 교육과정 개발
오재준 ( Jae-jun Oh ),최성주 ( Seong-joo Choi ) 한국실천공학교육학회 2017 실천공학교육논문지 Vol.9 No.1
최근 Industry 4.0으로 인해 제조업에 대한 생산성 향상과 고객만족을 위한 스마트팩토리 관심이 매우 높고 정부 지원에 따른 구축도 활발하다. 특히, 효율적인 생산 시스템을 구축하기 위한 데이터 통합과 이를 위한 필드버스 통신기술은 필수적이다. 필드버스는 특정 밴더 시스템에 구속받지 않는 개방형 제어시스템으로서 타사 제품과의 호환성, 데이터 전송의 정확성, 원격진단 등의 다양한 이점을 가지고 있다. 그러나, 필드버스를 학습하기 위한 교육 장비와 실습을 위한 교육과정 및 예제가 전무하여 산업현장에서 스마트팩토리 구축을 위해 필요로 하는 실무 능력 향상에 많은 제한점이 있다. 따라서 본 연구는 국내 산업현장에 적합한 PLC와 통신기술을 선정한 선행연구 결과를 바탕으로 실무적인 필드버스 교육을 위한 PLC기반의 필드버스 교육 장비와 교육과정을 개발하고 Ethernet IP, Profibus DP, Modbus, CC-Link, Device Net의 다양한 필드버스를 구현하였다. 또한, Ethernet IP를 통한 데이터 수집과 모니터링으로 분산된 필드기기의 제어와 원격진단이 가능함을 확인하였다. Recently, due to Industry 4.0, there is a great interest in smart factory for productivity improvement and customer satisfaction in manufacturing industry, and construction is also actively pursued by government support. In particular, data integration and fieldbus communication technology to build an efficient production system are essential. Fieldbus is an open control system that is not tied to a specific vendor system and has various advantages such as compatibility with other products, accuracy of data transmission, and remote diagnosis. However, there are no educational equipment for training field buses, training courses and examples for practical training, and there are many limitations in improving the practical skills needed for building smart factories in the industrial field. Therefore, this study develops PLC based fieldbus education equipment and training course based on previous research results that selected PLC and communication technology suitable for domestic industry field for practical fieldbus training and develops the training program of Ethernet IP, Profibus DP, Modbus, CC -Link, and DeviceNet. In addition, it is confirmed that the control and remote diagnosis of distributed field devices are possible by data collection and monitoring.
교육매체 활용 : 그래피칼 프로그램을 이용한 계측 및 제어 공학 실험실습
갈리 ( Mikhail Ghaly ),최성주 ( Seong Joo Choi ) 한국실천공학교육학회 2012 실천공학교육논문지 Vol.4 No.1
이 연구에서는 LabVIEW와 NI ELVIS를 이용하여 컴퓨터 기반의 공학교육 사례 즉 다양한 컴퓨터 기반의 공학실습을 소개한다. 여러 유명대학이나 연구소, 회사 등에서 웹/인터넷 또는 네트웍으로 제어되는 원격 실험과 같은 형태의 원격 실습이 가능하다. 컴퓨터 및 그래피칼프로그래밍 기술의 공학실습교육 적용을 통하여 공학 실험실습의 흥미와 효과를 제고하였다. This paper introduces computer based practice for engineering education through using NI-ELVIS and virtual instruments of LabVIEW as application software. Different laboratory experiments "Labs" will be presented as convenient paradigms of adopting computer based practice for the efficacy of engineering education. Remote labs as web/internet or network-enabled controlled by remote server computer have been extensively used by a number of universities, national laboratories and companies for different kind of application around the globe. Overtime, as technology proceed in its progress, more developed techniques are being used particularly in the field of engineering education.