http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
느타리버섯 병재배에서 버섯파리 방제를 위한 살충제의 잔류 경감 추이분석
최문호,채정기,오득실,김현석 한국버섯학회 2006 한국버섯학회지 Vol.4 No.2
느타리버섯 재배시 발생하는 버섯파리를 효과적으로 방제하고자 사용된 4종의 약제는 chlorpyrifos, methidathion, cyhalothrin, cypermethrin이며, 버섯파리방제용 살충제로서 농약 안전사용측면에서 가장 추천할 만한 약제는 methidathion으로 구명되었다. 포장조건 단계와 세척 단계, 데치기 단계를 통한 각기 다른 방법에 의한 잔류량 변화 추이 는 데치기 > 세척 > 포장조건 순으로 잔류량에 차이를 보였으며, 포장조건 보다는 세척 단계에서 16∼31%정도 잔류량이 감소하였으며, 데치기 단계에서는 31∼48%가 감소함을 알 수 있었다. 포장조건과 세척, 데치기 등과 같은 처리방법에 따 른 약제의 처리수준별 반감기는 chlorpyrifos 기준량(1000배액)은 0.7∼0.8일, 배량(500배액)은 1.2∼1.5일, methidathion 기준 량은 0.5∼0.6일, 배량은 0.4∼0.5일, cyhalothrin 기준량은 1.2∼1.6일, 배량은 2.2∼2.4일, cypermethrin 기준량은 1.1∼1.5일, 배량은 1.6∼2.0로 나타났다. 기준량과 배량으로 처리한 약제에서는 반감기가 비슷한 methidathion을 제외하고는 저농도인 기준량이 잔류농약의 감소속도가 더 빠르게 진행하여 반감기가 고농도보다 짧아지 는 것으로 나타났다. 포장 조건하에서 약제살포 후 느타리버섯에 대한 농약 잔류량을 잔류허용기준(MRL)이하로 관리하 기 위해서는 chlorpyrifos는 기준량 처리 후 6일에 수확하는 것이 바람직하며, 배량 살포의 경우 7일 후에도 잔류허용기준 이하로는 분해가 되지 않은 것으로 나타나 권장량 이상의 살포는 바람직하지 않은 것으로 나타났다. Methidathion은 기준 량 처리구는 2일, 배량 처리구는 3일 이후 수확이 바람직한 것으로 나타났고, cyhalothrin은 기준량과 배량 처리구 모두 1 일 이후 수확이 바람직하나 미량이나마 6∼7일째까지 농약이 잔류됨을 알 수 있다.
CMFF CMOS 인버터 타입 OTA를 이용한 Gm-C 필터 설계
최문호,김영석 한국전기전자재료학회 2010 전기전자재료학회논문지 Vol.23 No.4
In this paper, a Gm-C LPF utilizing common-mode feedforward (CMFF) CMOS inverter type operational transconductance amplifier (OTA) has been designed and verified by circuit simulations. The CMFF CMOS inverter OTA was optimized for wide input linearity and low current consumption using a standard 0.18 ㎛ CMOS process; gm of 100 μS and current of 100 μA at supplied voltage of 1.3 V. Using this optimized CMFF CMOS inverter type OTA, an elliptic 5th order Gm-C LPF for GPS specifications was designed. Gain and frequency tuning of the LPF was done by changing the internal supply voltages. The designed Gm-C LPF gave pass-band ripple of 1.6 dB, stop-band attenuation of 60.8 dB, current consumption of 0.60 mA at supply voltage of 1.2 V. The gain and frequency characteristics of designed Gm-C LPF was unchanged even though the input common-mode voltage is varied.
다중 표준 시스템을 위한 이득 곡선 제어기를 가진 가변이득 증폭기 설계
최문호,이원영,김영석,Choi, Moon-Ho,Lee, Won-Young,Kim, Yeong-Seuk 한국전기전자재료학회 2008 전기전자재료학회논문지 Vol.21 No.4
In this paper, variable gain amplifier(VGA) with a gain slope controller has been proposed and verified by circuit simulations and measurements. The proposed VGA has a gain control, gain slope switch and variable gain range. The input source coupled pair with diode connected load is used for VGA gain stage. The gain slope controller with switch can control VGA gain slope. The proposed VGA is fabricated in $0.18{\mu}m$ CMOS process for multi -standard wireless receiver. The proposed two stage VGA consumes min. 2.0 mW to max. 2.6 mW in gain control range and gives input IP3 of -3.77 dBm and NF of 28.7 dB at 1.8 V power supply under -25 dBm, 1 MHz input. The proposed VGA has 37 dB(-16 dB $\sim$ 21 dB) variable gain range, and 8 dB gain range control per 0.3 V control voltage, and can provide variable gain, positive and negative gain slope control, and gain range control. This VGA characteristics provide design flexibility in multi-standard wireless receiver.
저널 오정렬 및 수막두께의 축방향 단계변화의 복합영향을 고려한 수직펌프용 유체동압 저널베어링의 하중지지력 변화에 관한 연구
최문호 한국기계기술학회 2020 한국기계기술학회지 Vol.22 No.4
Load carrying capacity(LCC) can be reduced from its design value as a result of film thickness change when a journal is misaligned and some part of bearing is unintentionally translated. In this study, the numerical solution of the incompressible Reynolds equation was obtained by using the finite difference method and mass conservation algorithm (JFO boundary condition) with periodic pressure distribution in circumferential direction to analyze the change of LCC due to journal misalignment and step change of film thickness in axial direction for a journal bearing of vertical pumps. Smallest LCC in each eccentricity ratio is obtained as two angular positions are changed – an angular position where misalignment occurs, and another angular position where the axial step takes place while the degree of misalignment is fixed at 90%. Compared with the reaction force of plain journal bearing, the LCC reduced as much as 26.7% due to geometric effects of journal bearing at the eccentricity ratio of 0.9, while the step height is no higher than 0.1 times of bearing clearance.
결합도와 격리도를 개선한 이중층 Re-entrant 마이크로스트립 방향성 결합기 설계
최문호,이진택,천동완,신철재 한국전자파학회 2003 한국전자파학회논문지 Vol.14 No.10
본 논문에서는 이중충 마이크로스트립 유전체 기판을 이용하여 결합도와 격리도를 개선한 방향성 결합기를 제안하고, 설계방법을 제시하였다. 제안된 구조는 re-entrant mode 방향성 결합기의 구조를 수정하여, 결합도를 향상시키기 위해 최하층의 접지면에 어퍼쳐를 적용시킨 형태이다. 또한, 부동도체에 슬릿을 적용함으로써 격리도, S$_{11}$에 대한 정재파비, 그리고 위상차 등에 서도 우수한 특성을 얻을 수 있었다. 그 결과, 제안된 re-entrant mode 방향성 결합기는 기존의 구조보다 약 1.5 dB 정도 높은 결합도를 가질 뿐 아니라 각각 20 dB 이상의 개선된 격리도와 S$_{11}$에 대한 정재파비를 가짐을 확인할 수 있었다. 또한 위상 특성에서도 우수한 특성을 가지므로, 이로부터 제안된 결합기는 강한 결합이 필요한 다단 결합기에 사용될 수 있을 것이다. In this paper, we proposed the directional coupler using two layer microstrip substrate which is improved coupling and isolation. Also, we notified a design method. Modified re-entrant mode coupler is the structure added to the aperture on the ground plane in order to improving the coupling value. And, by adding to slits on the floating conductor, this structure has good performance in isolation, VSWR according to S$\sub$11/, and phase difference. As a result, proposed re-entrant mode microstrip directional coupler has about 1.5 dB more higher coupling and 20 dB more higher isolation than conventional coupler. And because this coupler has good performance in phase difference, it can be used multi-section coupler.