http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
최근호 한국화학공학회 2001 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.39 No.6
본 연구에서는 종래 기술의 문제점을 해결하기 위하여 낮은 다분산성지수를 갖는 폴리에틸렌 왁스를 생산하기 위한 새로운 열분해법을 개발하였다. 새로운 열분해법의 특징은 반응단계 이전에 예비가열단계를 갖는 것이다. 예비가열단계는 원료의 열전도도를 증가시키기 위하여 반응온도(380-400℃)보다 낮은 온도(250-370℃)로 원료를 가열하여 그 온도에서 일정한 시간동안 유지하는 것을 의미한다. 효과적인 열전달을 위하여 특수하게 설계된 임펠러가 내부에 설치되어 있는 외부순환형 루프반응기와 새로운 열분해법을 사용하여 다분산성지수(3.90이하)가 낮은 폴리에틸렌 왁스를 5.40시간이내에 생산할 수 있었다. 예비가열단계의 온도가 제품의 다분산성지수, 내용물의 점도, 제조시간에 미치는 영향은 무시할 만하였다. 예비가열단계의 수를 증가시켜도 제품의 다분산성지수는 거의 변하지 않았다. 반응온도가 증가하면 내용물의 점도는 시간이 증가할수록 보다 빨리 감소하며 그것으로 인하여 반응시간은 감소하였다. 내용물의 점도는 반응시간이 증가함에 따라서 감소하였다. In this study, to solve the problems of previous techniques, a new thermal degradation method was used for producing polyethylene wax having a low polydispersity index. The thermal degradation method was characterized by putting the preheating stage before the reaction stage. At the preheating stage, to increase the thermal conductivity of raw material, the raw material was heated up to a certain temperature(250-370℃), which was lower than the reaction temperature(380-400℃), and was remained at that temperature for a certain time. Polyethylene wax with a low polydispersity index(less than 3.90) could be produced within 5.40 hr using both the thermal degradation method and an external-loop reactor in which specially designed impellers were installed for more effective heat transfer. The effect of the temperature of preheating stage on the polydispersity of product, the viscosity of medium and the manufacturing time was negligible. An increase in the number of preheating stage only marginally affected the polydispersity index of product. When the reaction temperature increased, the viscosity of medium was more rapidly decreased with time and, hence, the reaction time was decreased. The viscosity of medium was decreased with increasing the reaction time.
캐나다 산학협력(Co-op)교육의 산실 워털루대학교 : University of Waterloo
최근호 한밭대학교 산업과학기술연구소 1994 논문집 Vol.2 No.-
나는 지난 1년간 한국과학재단의 지원으로 캐나다에 있는 워털루대학교에서 방문연구보좌교수의 자격으로 연수를 받은 바 있어, 몇 일전에 평소 가깝게 지내던 교수님으로 부터 본지의 외국대학 소개란을 위한 원고 청탁을 받고는 차마 뿌리치지 못하고, 미흡한 글재주로 그리 잘 알지도 못하는 외국의 한 대학을 소개하려니 부끄러운 마음 금할 길 없으나, 미흡하나마 연구기간동안 수집한 신문자료와 그 대학의 소개책자 그리고 강의 시간표등을 바탕으로 워털루대학교를 소개하고자 한다.
구강악안면영역의 낭종에 대한 6년간의 후향적 임상 연구
최근호,장정록,박영준,문혜원,김영준,유민기,국민석,박홍주,유신열,오희균,Choi, Guen-Ho,Jang, Jung-Rok,Park, Young-Jun,Moon, Hyea-Won,Kim, Young-Joon,Yu, Min-Gi,Kook, Min-Suk,Park, Hong-Ju,Ryu, Sun-Youl,Oh, Hee-Kyun 대한악안면성형재건외과학회 2009 Maxillofacial Plastic Reconstructive Surgery Vol.31 No.5
Purpose : This study was designed to evaluate the clinical aspect of cysts which arised in the oral and maxillofacial region. Patients and Methods : We reviewed clinical record, radiograph, histopathologic and operative report of 155 patients who had been diagnosed as cysts and treated at the department of oral and maxillofacial surgery in Chonnam National University Hospital from January 2003 to December 2008. Gender, age, classifiaction, anatomic distribution, clinical sign and symptoms, treatment, complications and recurrence rate were studied. Results : 1. Among 155 patients, the male patients(64.5%) were more than the female(35.5%). 2. The average age ofthe patients was 37.2 years(ranging from 5 to 79 years). 3. In pathologic classification, radicular cyst and dentigerous cyst were most common cysts, irrespective of 73 cases(48.3%) and 35 cases(23.2%). 4. The frequently involved cystic regions were followed as mandibular molars(38.1%), and maxillary incisors(30.2%). 5. The frequent sequence of clinical symptoms was edema(29.9%), no symptom(18.9%), tenderness(13.9%), pain(11.5%) and abscess(9.4%). 6. The most prevalent treatment was the combination operation, such as cyst enucleation with extraction or endodontic treatment of the causative tooth(76.8%) 7. Among 155 cases, 2 cases that were treated using enucleation method were recurred(1.3%).
Prediction of gas holdup in various types of airlift reactors
최근호 한국화학공학회 2021 Korean Journal of Chemical Engineering Vol.38 No.9
Useful correlations were derived for the prediction of available gas holdup data in air-water systems, using the operational and geometric parameters of airlift reactors only. To successfully consider the geometric difference between various types of airlift reactors, the characteristic distance (Dch) and the gas separation area (As) were defined as geometric parameters, respectively. The riser gas holdup (r) in various types of airlift reactors was satisfactorily correlated with the operational and geometric parameters, such as the riser superficial gas velocity (UGr), a parameter containing the ratio of the top clearance to downcomer length (1+Ct/Ld), the characteristic distance to downcomer length ratio (Dch/Ld), the downcomer to riser cross-sectional area ratio (Ad/Ar), the ratio of the gas separation area to riser cross-sectional area (As/Ar), and the bottom to downcomer cross-sectional area ratio (Ab/Ad). The downcomer gas holdup in various types of airlift reactors was well correlated by a nonlinear equation involving r, Dch/Ld, Ad/Ar, Ab/Ad, (1+Ct/Ld), and As/Ar.
다차원 도시시설물 관리를 위한 멀티 텍스처 기법과 다중 스레드 기법의 적용에 관한 연구
최근호,강병준,조홍범,김원철,Choi, Keun-Ho,Kang, Byoung-Jun,Cho, Hong-Beom,Kim, Won-Cheol 한국공간정보학회 2010 한국공간정보학회지 Vol.18 No.1
최근까지 도시시설물 관리를 위해 활용된 GIS 기술은 주로 2차원 기반의 GIS 기술이었다. 하지만 도시시설물은 3차원 공간상에 존재하며 이를 2차원으로 추상화시키면 정보의 손실이 일어나게 된다. 또한 도시 공간 내에 점차 시설물의 수가 증가하고 있고 대부분의 도시시설물이 지하공간에 위치하기 때문에 2차원 기반의 시스템에서 도시 내 모든 시설물의 정보를 통시에 파악하고 관리하는 것이 어려워지고 있다 본 논문에서는 멀티 텍스처 기법을 이용한 다차원 도시시설물 관리 시스템을 제안한다. 제안된 시스템은 3차원 상에서 도시시설물을 가시화하여 데이터의 손실을 줄이고 정보의 가독성을 높이며, 2차원 벡터 데이터의 3차원 라스터 변환을 통한 가시화 기법을 개발하여 다양한 2차원 GIS 의 공간분석 결과를 3차원 데이터와 동시에 활용할 수 있도록 한다. 또한 3차원 데이터를 처리하는 경우에 시스템의 속도 및 성능이 저하되어 활용 효율성이 떨어지는 문제를 해결하기 위하여 다중 스레드 프로세스를 적용하였다. 본 논문에서 제안한 기술은 기존에 텍스처를 통해 보여주던 센서의 상태정보를 3차원 영상, 시설물 데이터와 함께 시각정보로 표출함으로써 직관적인 시설물 모니터링이 가능해졌다는데 의의가 있다. Recently, 2D GIS technology is applied for urban facility management. However, urban facilities are located in 3D space and the information loss is occurring during data abstraction from 3D urban facility to 2D object. Also, the number of urban facilities is increasing steadily and most of urban facilities are located in underground space in the city. Therefore 2D urban facility management system has a limitation on visualization and management for a large number of urban facilities. In this paper, a multi-dimensions urban facility management system based on multi-texture technology is proposed. The proposed system reduces the information loss and improves the readability of information by visualizing urban facilities on 3D virtual space. A multi-texturing technology is applied for integrating of 2D vector data and 3D raster data, and a multi-thread technology is used for improving speed and performance of the system. The proposed technology can be used as a guideline for urban facility monitoring as providing visual information of a facility status with 3D image and facility data.