http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
전해 도금법을 이용한 공정 납-주석 플립 칩 솔더 범프와 UBM(Under Bump Metallurgy) 계면반응에 관한 연구
장세영,백경옥,Jang, Se-Yeong,Baek, Gyeong-Ok 한국재료학회 1999 한국재료학회지 Vol.9 No.3
솔더 범프를 사용하는 플립 칩 접속기술에서 범프와 칩 사이에 위치하는 금속 충들의 조합을 UBM(Under Bump Metallurgy)라고 부르며 이 UBM을 어떤 조합으로 사용하는 가에 따라 접속의 안정성이 크게 좌우된다. 본 연구에서는 UBM중에서 솔더 접착 층으로 사용되는 구리 층의 두께를 $1\mu\textrm{m}와 5\mu\textrm{m}$로 하는 한편 barrier 층으로 사용되는 금속 층을 Ti, Ni, Pd으로 변화시키면서 이들 UBM과 공정 납-주석 사이의 계면반응을 살펴보았다. 이를 위해 $100\mu\textrm{m}$ 크기의 솔더 범프를 전해도금법을 사용하여 제작하고 리플로 횟수와 시효시간에 따른 각 UBM에서의 금속간 화합물의 성장을 관찰하였다. $Cu_6Sn_5 \eta'$-상 금속간 화합물이 모든 조건에서 형성되었고 Cu층의 두께가 $5\mu\textrm{m}$로 두꺼운 경우에는 $Cu_3Sn \varepsilon$-상도 관찰되었다. Pd을 사용한 UBM 구조에서는 시효 처리시에 $Cu_6Sn_5$ 상 아래쪽에 $PdSn_4$상이 형성되었다. 또한 이들 계면에서의 금속간 화합물의 성장은 솔더 범프의 접속강도 값과 밀접한 관계를 가진다. In the flip chip interconnection using solder bump, the Under Bump Metallurgy (UBM) is required to perform multiple functions in its conversion of an aluminum bond pad to a solderable surface. In this study, various UBM systems such as $Al 1\mu\textrm{m} / Ti 0.2\mu\textrm{m} / Cu 5\mu\textrm{m}, Al 1\mu\textrm{m} / Ti 0.2\mu\textrm{m} / Cu 1\mu\textrm{m}, al 1\mu\textrm{m}/Ni 0.2\mu\textrm{m} / Cu 1\mu\textrm{m} and Al 1\mu\textrm{m}/Pd 0.2\mu\textrm{m} / Cu 1\mu\textrm{m}$ for flip chip interconnection using the low melting point eutectic 63Sn-37Pb solder were investigated and compared to their metallurgical properties. $100\mu\textrm{m}$ size bumps were prepared for using an electroplating process. The effects of the number of reflows and aging time on the growth of intermetallic compounds(IMC) were investigated. $Cu_6Sn_5$ and $Cu_3Sn$ IMC were abserved after aging treatment in the UBM system with thick coper $(Al 1\mu\textrm{m}/Ti 0.2\mu\textrm{m}/Cu 5\mu\textrm{m})$. However only the $Cu_6Sn_5$ was detected in the UBM system with $1\mu\textrm{m}$ thick copper even after 2 reflow and 7 day aging at $150^{\circ}C$. Complete Cu consumption by Cu-Sn IMC growth gives rise to a direct contact between solder inner layer such as Ti, Ni and Pd, and hence to possibly cause reactions between two of them. In this study, however, only for the Pd case, IMC of PdSn. was observed by Cu consumption. UBM interfacial reactions with s이der affected the adhesion strength ot s이der balls after s이der reflow and annealing treatment.
장세영 ( Seyeong Jang ),최훈도 ( Hoondo Choi ),유장호 ( Jangho Yu ),남기찬 ( Kican Nam ) 한국로지스틱스학회 2017 로지스틱스연구 Vol.25 No.4
본 연구에서는 부산지역 항공화물 운송 추이, 부산항 Sea&Air 복합운송 화물 운송 추이 등의 실태파악과 지역별 수출입 항공화물 발생량을 기준으로 이동경로 분석, 포트폴리오 분석을 수행함으로써 부산지역 항공화물 유치를 위한 정책대안 제시를 연구의 목적으로 하였다. 부산 지역에서 발생하는 항공화물의 약 60.0%를 차지하는 12개 해외 발생지역을 대상으로 정적 및 동적 BCG 매트릭스 분석 결과를 고려하여 최종 마케팅 대상 항만을 선정하였다. 먼저 Frankfurt, Singapore, Xianyang, Chicago, Bangkok, Amsterdam, Doha 지역은 부산지역 항공화물 유치를 위한 마케팅 핵심 지역으로 포함되었으며 지속적인 마케팅이 필요한 지역은 Leipzig, Pudong, Los Angeles, Hong Kong, Tokyo-Narita 지역으로 선정되었다. The present study aims to present alternative policies to increase the air cargo volume in Busan by analyzing the current status of air cargo transportation and of Sea&Air combined transport system in Busan, as well as examining transport routes and utilizing portfolio analysis on the basis of air freight volumes of import/export by region. The Static BCG matrix analysis of 12 overseas destinations accounting for approximately 60% of all air cargo transportation in Busan suggests that Frankfurt is only located in ‘Cash Cows’ while Singapore, Xianyang, Leipzig, Pudong, Chicago, Los Angeles come to belong to ‘Question Marks’. With none in ‘Stars’, ‘Dogs’ includes Doha, Bangkok, Tokyo-Narita, Hong Kong and Amsterdam. The dynamic understanding of BCG matrix puts Frankfurt into ‘Cash Cows’ from ‘Dogs’, with Singapore having moved to “Question Marks’ from “Stars”. Xianyang and Chicago in “Question Marks” tend to go over to “Stars”, while such highly-sensitive-to-the-trend countries as Doha, Leipzig, Pudong see the possibility of shifting towards “Stars” in the future. It also shows Los Angeles and Tokyo in “Dogs” are in the middle of shifting to “Question Marks”, and Hong Kong and Amsterdam are remaining at “Dogs” with no distinct change.
장세영(Se-Young Jang),신경아(Kyung-A Sin),정용진(Yong-Jin Jeong) 한국식품영양과학회 2010 한국식품영양과학회지 Vol.39 No.2
국내산 사과를 원료로 일체의 첨가물을 사용하지 않고 교반 및 정치배양법으로 각각의 사과식초를 제조하여 품질을 비교하였다. 사과식초의 pH는 초산발효기간이 지남에 따라 낮아졌으며, 총산은 증가하였다. 교반배양 사과식초(A)는 발효 8일째에 6.08%, 정치배양 사과식초(B)는 발효 60일째에 5.20%로 나타나 교반배양법(A)으로 제조한 사과식초가 총산은 높게 나타났으며, pH와 당도는 식초 간에 큰 차이는 없었다. L값은 정치배양 사과식초(B)가 교반배양 사과식초 (A)에 비해 더 낮게 나타났으나 a값, b값은 높게 나타났다. 유기산 함량은 교반배양 사과식초(A)에서는 acetic acid만 높았으나 정치배양 사과식초(B)에서는 malic acid, citric acid 및 succinic acid도 높게 나타났다. 유리당은 교반배양 사과식초(A), 정치배양 사과식초(B) 모두에서 fructose, glucose가 검출되었다. 사과식초의 관능검사 결과, 맛과 전반적 기호도에서 정치배양 사과식초(B)가 가장 높은 평점을 얻었다. 이상의 결과 전통적인 정치배양법으로 고품질의 사과식초 제조가 가능할 것으로 기대된다. Quality characteristics of apple vinegar by using agitated and static cultures without any additive were compared. pH was reduced with passage of acetic acid fermentation time. Total acidity of the agitated culture vinegar (A) was 6.08% at the 8 day according to the progress of fermentation and that of the static culture vinegar (B) recorded 5.20% at the 60 day of fermentation. There was no significant difference in sugar content of (A) and (B). L value was lower in (B) than (A) but a and b values were higher in (B) than (A). Organic acid content of (A) was high only in acetic acid but malic, citric and succinic acids appeared high in (B). As free sugar, fructose and glucose were observed in both of them. In sensory examination results, (B) showed the highest taste and overall preferences. From all of these results traditional static culture are expected to be used to make high-quality vinegar.