지능형 사건 처리를 강조한 협업 감시 시스템

윤태호,송유승,Yoon, Tae-Ho,Song, Yoo-Seoung 대한임베디드공학회 2012 대한임베디드공학회논문지 Vol.7 No.6

Security and monitoring system has many applications and commonly used for detection, warning, alarm, etc. As the networking technology advances, user requirements are getting higher. An intelligent and cooperative surveillance system is proposed to meet current user demands and improve the performance. This paper focuses on the implementation issue for the embedded intelligent surveillance system. To cover wide area cooperative function is implemented and connected by wireless sensor network technology. Also to improve the performance lots of sensors are employed into the surveillance system to reduce the error but improve the detection probability. The proposed surveillance system is composed of vision sensor (camera), mic array sensor, PIR sensor, etc. Between the sensors, data is transferred by IEEE 802.11s or Zigbee protocol. We deployed a private network for the sensors and multiple gateways for better data throughput. The developed system is targeted to the traffic accident detection and alarm. However, its application can be easily changed to others by just changing software algorithm in a DSP chip.

무선 메쉬 네트워크 기반의 다층구조 감시 시스템 구축

윤태호,송유승,Yoon, Tae-Ho,Song, Yoo-Seoung 대한임베디드공학회 2012 대한임베디드공학회논문지 Vol.7 No.5

In the present, Wireless Sensor Network(WSN) has been used for the purpose of the military operation with surveillance systems and for collecting useful information from the natural environment. Basically, low-power, easy deployment and low cost are the most important factors to be deployed for WSNs. Lots of researches have been studied to meet those requirements, especially on the node capacity and battery lifetime improvements. Recently, the study of wireless mesh networks applied into the surveillance systems has been proceeded as a solution of easy deployment. In this paper, we proposed large-scale intelligent multi-layer surveillance systems based on QoS assuring Wireless Mesh Networks and implemented them in the real testbed environment. The proposed system explains functions and operations for each subsystem as well as S/W and H/W architectures. Experimental results are shown for the implemented subsystems and the performance is satisfactory for the surveillance system. We can identify the possibility of the implemented multi-layer surveillance system to be used in practice.

서울 약수터의 지표세균 분포 및 16S rRNA 염기서열을 이용한 총대장균군 동정 및 계통분석

윤태호,이향,최금숙,이승주,이목영,어수미,Yoon, Tae-Ho,Lee, Hyang,Choi, Geum-Sook,Lee, Seung-Joo,Lee, Mok-Young,Eo, Soo-Mi 한국환경보건학회 2013 한국환경보건학회지 Vol.39 No.6

Objectives: This study was performed in order to detect indicator bacteria in drinking spring water (DSW) samples in Seoul Metropolitan City, and to identify their genus through 16S rRNA sequencing and then assessing the genetic relation of their strains. Methods: For indicator bacteria detection and identification of total coliforms, we analyzed DSW between the spring and summer seasons. In particular, DSW samples were chosen from sites repeatedly found unsatisfactory in recent years. Results: Heterotrophic plate counts of DSW in the spring and summer season were investigated in the range of 0-550 and 0-800 CFU/mL, respectively. Total coliforms of these were 0-1,900 and 0-2,100 CFU/100mL, fecal coliforms were 0-600 and 0-550 CFU/100mL, and Escherichia coli were 0-7 and 0-326 MPN/100mL. The detection ratio of fecal pollution indicators and that of fecal coliforms increased to 58.6% in the summer from 12.5% in the spring and Escherichia coli increased to 51.4% from 4.7%. As a result of genetic analysis on the isolated bacteria, the genus of total coliforms was classified in the order of Enterobacter spp. 12.7%, Serratia spp. 7.3%, E. hermanii 6.4%, Rahnella spp. 5.5%, Hafnia spp. 4.5%, Escherichia coli 3.6%, Klebsiella spp. 3.6% in the spring season. In the summer season, it was classified in order of Klebsiella spp. 16.6%, Enterobacter spp. 13.0%, Escherichia coli 11.0%, Serratia spp. 8.6%, Raoultella spp. 7.0%, Kluyvera spp. 5.6% and Citrobacter spp. 3.0%. Conclusions: The increase of fecal pollution in summer indicates that special attention to drinking DSW is required.

대장균의 전기투석배양

윤태호,김인호 ( Tae Ho Yoon,In Ho Kim ) 한국화학공학회 1995 화학공학의이론과응용 Vol.1 No.1

우리나라 건강불평등 해소를 위한 정책 제안

윤태호,Yoon, Tae-Ho 대한예방의학회 2007 예방의학회지 Vol.40 No.6

Although the New National Health Promotion Plan 2010 target to reduce health inequalities, whether the program will be effective for reducing the health inequalities in Korea remains quite unclear. More and more developed countries have been started to concentrate on comprehensive policies for reducing health inequalities. The health policies of the UK, Netherlands, and Sweden are the most wellknown. I propose that a comprehensive blueprint for tackling health inequalities in Korea should be made and that it must contain five domains: a target, structure and process, life-course approach, area-based approach, and reorganization of health care resources. The target should be based on determinants of health and more attention should be paid to socioeconmic factors. The structure and process require changes from the national health care policy based on medical services to the national health policy that involves the establishment of a Social Deputy?Prime Minister and the strengthening multidisciplinary action. A life-course approach especially focused on the early childhood years. Area-based approach such as the establishment of healthy communities, healthy schools, or healthy work-places which are focused on deprived areas or places is also required. Finally, health care resources should be a greater investment on public resources and strengthening primary care to reduce health inequalities. The policy or intervention studies for tackling health inequalities should be implemented much more in Korea. In addition, it is essential to have political will to encoruage policy action.

양극산화처리를 통한 다공성 임플랜트 표면의 표면거칠기 증대에 대한 연구

윤태호,송광엽,Yoon, Tae-Ho,Song, Kwang-Yeob 대한치과보철학회 2006 대한치과보철학회지 Vol.44 No.5

Statement of problem: HA has been used as a coating material on Ti implants to improve osteoconductivity. However. it is difficult to form uniform HA coatings on implants with complex surface geometries using a plasma spraying technique. Purpose : To determine if Ti6Al4V sintered porous-surfaced implants coated with HA sol-gel coated and hydrothermal treated would accelerate osseointegration. Materials and Methods : Porous implants which were made by electric discharge were used in this study. Implants were anodized and hydrothermal treatment or HA sol-gel coating was performed. Hydrothermal treatment was conducted by high pressure steam at $300^{\circ}C$ for 2 hours using a autoclave. To make a HA sol, triethyl phosphite and calcium nitrate were diluted and dissolved in anhydrous ethanol and mixed. Then anodized implant were spin-coated with the prepared HA sols and heat treated. Samples were soaked in the Hanks solution with pH 7.4 at $37^{\circ}C$ for 6 weeks. The microstructure of the specimens was observed with a scanning electron microscope (SEM), and the composition of the surface layer was analyzed with an energy dispersive spectroscope (EDS). Results : The scanning electron micrographs of HA sol-gel coated and hydrothermal treated surface did not show any significant change in the size or shape of the pores. After immersion in Hanks' solution the precipitated HA crystals covered macro- and micro-pores The precipitated Ca and P increased in Hanks' solution that surface treatment caused increased activity. Conclusion : This study shows that sol-gel coated HA and hydrothermal treatment significantly enhance the rate of HA formation due to the altered surface chemistry.

중소ㆍ중견기업을 위한 사용자 친화형 웹 기반 ezSIM 플랫폼 개발

윤태호(Tae Ho Yoon),박형욱(Hyungwook Park),손일엽(Ilyoup Sohn),황재순(Jae Soon Hwang),서동우(Dongwoo Seo) (사)한국CDE학회 2015 한국CDE학회 논문집 Vol.20 No.1

Structure and/or fluid analysis is gradually increased by an essential design process in the small and medium-sized businesses (SMBs) because of the needs for a rapid design process and the certification about the supplement of the parts by the large business (LB). In this paper, we developed the web-based ezSIM platform installed in the resources integrated system server. The ezSIM platform is based on the heterogeneous linux and windows operating system for the user-friendly connection with the part of the analysis for the SMBs. The procedure of the structure/fluid analysis service module using the public software and the license-free open code in the ezSIM platform was explained. The convenience of the ezSIM platform service was presented by the reaction rate of the graphic motion compared with that of a local PC and the solving and pre-post processing interface compared with that of the KISTI supercomputer. The web-based ezSIM platform service was identified as a useful and essential platform to the SMBs for the usage of the structure and/or fluid analysis procedure.

표준학교건물의 3차원 비탄성거동에 대한 이력모델의 영향

윤태호(Yoon, Tae-Ho) 한국산학기술학회 2015 한국산학기술학회논문지 Vol.16 No.4

본 논문은 내진성능평가를 위해 사용되는 비탄성해석의 신뢰도와 정확도에 있어 결정적인 영향을 미치는 다양한 이력모델의 특성과 구조물의 내진거동에 미치는 영향을 분석하고자 한다. 연구대상은 표준학교건물로서 우리나라 규준에 맞는 인공지진 가속도 3가지를 사용하여 4가지의 이력모델을 적용하여 3차원 시간이력해석을 수행하였다. 비탄성해석을 통 해 층전단력, 층간변위비, 층변위를 비교하고 힌지의 발생 상태를 파악하고 이력모델이 건물의 비탄성거동에 미치는 영향을 분석하였다. 연구 결과, 층전단력은 이력모델에 따라 최대 27%의 차이를 보이고, 층간변위비는 최대 30%의 차이가 나타났다. 장단변방향 모두에서 층전단력과 층간변위비는 최대값이 수정다케다모델에서 나타나 안전율 향상을 기대할 수 있을 것으로 판단된다. 층전단력의 최소값은 장단변방향 모두에서 클러프모델에서, 층간변위비는 장변방향은 다케다모델, 단변방향은 클 러프모델에서 나타났고 이 경우 안전율이 낮아질 것으로 사료된다. The three dimensional inelastic response characteristics of the standard school buildings depending on hysteresis models are reviewed. Three artificial earthquake records in accordance with KBC(Korea Building Code) are used and the inelastic response characteristics such as story shear force, story drift ratio, story displacement, hinge distribution state are reviewed with four hysteresis models. As results, story shear force is increased by maximum 27% and story drift ratio is increased by maximum 30% according to hysteresis models. Modified Takeda Model shows maximum story shear and story drift raio in longitudinal and short direction, expecting higher safety. Story shear shows minimum value with Clough Model in both directions and story drift ratio shows minimum with Takeda model in longitudinal and with Clough model in short direction, so these models are expected to decrease the safety ratio.

건축물 해체시 슬래브의 허용하중에 관한 연구

윤태호(Tae-Ho Yoon),이택규(Taek-Gyu Lee) 한국산학기술학회 2014 한국산학기술학회 학술대회 Vol.- No.-

본 논문에서는 전면해체 공사의 구조적 안전성을 검토함에 있어 다양한 변수들에 대한 연구를 통하여 전면해체 공사에 적용할 현실적인 작업여건을 재정립을 하고자 한다. 특히, 도심지 건축물에서 장비를 상부 바닥slab에 투입하여 해체하고 해체된 적재물의 적재높이에 대한 해석적인 고찰을 통하여 해체작업시 구조물의 붕괴를 방지하고 해체작업의 안전성 확보를 그 목적으로 하고자 한다.

하중이력에 따른 탄소섬유로 보강된 RC보의 휨 거동

윤태호(Yoon, Tae-Ho),김진상(Kim, Jin-Sang) 한국산학기술학회 2015 한국산학기술학회논문지 Vol.16 No.1

본 연구에서는 합리적인 보강설계를 위하여 기존 철근콘크리트 보에 탄소섬유시트 보강시 하중이력에 따른 휨보강 효과를 분석하였다. 실구조물에서는 다양한 하중이력을 겪은 철근콘크리트보에 보강을 하게 되나 보강시기에 따른 구조물과 보강재료의 초기상태가 고려되지 않으므로 구조물의 안전적 측면과 경제적 측면으로 문제점을 발생시킬 수 있는 요인이 된다. 다양한 하중이력을 거친 RC 보의 변형률 상태를 고려하여 탄소섬유시트 보강에 따른 거동변화를 분석하였다. 휨보강후거동에 영향을 미치는 변수들에 대하여 보강대상 부재의 하중이력의 영향을 고려한 비선형 단면해석결과 탄소섬유 휨보강보의 보강 후 구조적 성능은 하중이력에 따라 달라지는 것으로 나타났다. 탄소섬유 휨보강보의 휨강도는 하중이력에 크게 영향을 받으므로 설계시 반드시 고려하여야 한다. This study examined the flexural strength of CFS reinforced concrete beams with various load histories. The RC beams to be reinforced by CFS have undergone various loading histories but neglecting the loading history results in a few problems in structural safety and cost. Structural behavior of CFS-strengthened RC beams were analyzed considering the strain status of RC beams under loads at the time of CFS strengthening. Nonlinear section analysis showed that the flexural strength of CFS-strengthened RC beams depends on the load history of the RC beams. From the result of this analysis, the flexural strength of a CFS-strengthened concrete beam is affected considerablly by the load history and should be considered in CFS reinforcement.