서울 약수터의 지표세균 분포 및 16S rRNA 염기서열을 이용한 총대장균군 동정 및 계통분석

윤태호,이향,최금숙,이승주,이목영,어수미,Yoon, Tae-Ho,Lee, Hyang,Choi, Geum-Sook,Lee, Seung-Joo,Lee, Mok-Young,Eo, Soo-Mi 한국환경보건학회 2013 한국환경보건학회지 Vol.39 No.6

Objectives: This study was performed in order to detect indicator bacteria in drinking spring water (DSW) samples in Seoul Metropolitan City, and to identify their genus through 16S rRNA sequencing and then assessing the genetic relation of their strains. Methods: For indicator bacteria detection and identification of total coliforms, we analyzed DSW between the spring and summer seasons. In particular, DSW samples were chosen from sites repeatedly found unsatisfactory in recent years. Results: Heterotrophic plate counts of DSW in the spring and summer season were investigated in the range of 0-550 and 0-800 CFU/mL, respectively. Total coliforms of these were 0-1,900 and 0-2,100 CFU/100mL, fecal coliforms were 0-600 and 0-550 CFU/100mL, and Escherichia coli were 0-7 and 0-326 MPN/100mL. The detection ratio of fecal pollution indicators and that of fecal coliforms increased to 58.6% in the summer from 12.5% in the spring and Escherichia coli increased to 51.4% from 4.7%. As a result of genetic analysis on the isolated bacteria, the genus of total coliforms was classified in the order of Enterobacter spp. 12.7%, Serratia spp. 7.3%, E. hermanii 6.4%, Rahnella spp. 5.5%, Hafnia spp. 4.5%, Escherichia coli 3.6%, Klebsiella spp. 3.6% in the spring season. In the summer season, it was classified in order of Klebsiella spp. 16.6%, Enterobacter spp. 13.0%, Escherichia coli 11.0%, Serratia spp. 8.6%, Raoultella spp. 7.0%, Kluyvera spp. 5.6% and Citrobacter spp. 3.0%. Conclusions: The increase of fecal pollution in summer indicates that special attention to drinking DSW is required.

우리나라 건강불평등 해소를 위한 정책 제안

윤태호,Yoon, Tae-Ho 대한예방의학회 2007 예방의학회지 Vol.40 No.6

Although the New National Health Promotion Plan 2010 target to reduce health inequalities, whether the program will be effective for reducing the health inequalities in Korea remains quite unclear. More and more developed countries have been started to concentrate on comprehensive policies for reducing health inequalities. The health policies of the UK, Netherlands, and Sweden are the most wellknown. I propose that a comprehensive blueprint for tackling health inequalities in Korea should be made and that it must contain five domains: a target, structure and process, life-course approach, area-based approach, and reorganization of health care resources. The target should be based on determinants of health and more attention should be paid to socioeconmic factors. The structure and process require changes from the national health care policy based on medical services to the national health policy that involves the establishment of a Social Deputy?Prime Minister and the strengthening multidisciplinary action. A life-course approach especially focused on the early childhood years. Area-based approach such as the establishment of healthy communities, healthy schools, or healthy work-places which are focused on deprived areas or places is also required. Finally, health care resources should be a greater investment on public resources and strengthening primary care to reduce health inequalities. The policy or intervention studies for tackling health inequalities should be implemented much more in Korea. In addition, it is essential to have political will to encoruage policy action.

양극산화처리를 통한 다공성 임플랜트 표면의 표면거칠기 증대에 대한 연구

윤태호,송광엽,Yoon, Tae-Ho,Song, Kwang-Yeob 대한치과보철학회 2006 대한치과보철학회지 Vol.44 No.5

Statement of problem: HA has been used as a coating material on Ti implants to improve osteoconductivity. However. it is difficult to form uniform HA coatings on implants with complex surface geometries using a plasma spraying technique. Purpose : To determine if Ti6Al4V sintered porous-surfaced implants coated with HA sol-gel coated and hydrothermal treated would accelerate osseointegration. Materials and Methods : Porous implants which were made by electric discharge were used in this study. Implants were anodized and hydrothermal treatment or HA sol-gel coating was performed. Hydrothermal treatment was conducted by high pressure steam at $300^{\circ}C$ for 2 hours using a autoclave. To make a HA sol, triethyl phosphite and calcium nitrate were diluted and dissolved in anhydrous ethanol and mixed. Then anodized implant were spin-coated with the prepared HA sols and heat treated. Samples were soaked in the Hanks solution with pH 7.4 at $37^{\circ}C$ for 6 weeks. The microstructure of the specimens was observed with a scanning electron microscope (SEM), and the composition of the surface layer was analyzed with an energy dispersive spectroscope (EDS). Results : The scanning electron micrographs of HA sol-gel coated and hydrothermal treated surface did not show any significant change in the size or shape of the pores. After immersion in Hanks' solution the precipitated HA crystals covered macro- and micro-pores The precipitated Ca and P increased in Hanks' solution that surface treatment caused increased activity. Conclusion : This study shows that sol-gel coated HA and hydrothermal treatment significantly enhance the rate of HA formation due to the altered surface chemistry.

지능형 사건 처리를 강조한 협업 감시 시스템

윤태호,송유승,Yoon, Tae-Ho,Song, Yoo-Seoung 대한임베디드공학회 2012 대한임베디드공학회논문지 Vol.7 No.6

Security and monitoring system has many applications and commonly used for detection, warning, alarm, etc. As the networking technology advances, user requirements are getting higher. An intelligent and cooperative surveillance system is proposed to meet current user demands and improve the performance. This paper focuses on the implementation issue for the embedded intelligent surveillance system. To cover wide area cooperative function is implemented and connected by wireless sensor network technology. Also to improve the performance lots of sensors are employed into the surveillance system to reduce the error but improve the detection probability. The proposed surveillance system is composed of vision sensor (camera), mic array sensor, PIR sensor, etc. Between the sensors, data is transferred by IEEE 802.11s or Zigbee protocol. We deployed a private network for the sensors and multiple gateways for better data throughput. The developed system is targeted to the traffic accident detection and alarm. However, its application can be easily changed to others by just changing software algorithm in a DSP chip.

대장균의 전기투석배양

윤태호,김인호 ( Tae Ho Yoon,In Ho Kim ) 한국화학공학회 1995 화학공학의이론과응용 Vol.1 No.1

무선 메쉬 네트워크 기반의 다층구조 감시 시스템 구축

윤태호,송유승,Yoon, Tae-Ho,Song, Yoo-Seoung 대한임베디드공학회 2012 대한임베디드공학회논문지 Vol.7 No.5

In the present, Wireless Sensor Network(WSN) has been used for the purpose of the military operation with surveillance systems and for collecting useful information from the natural environment. Basically, low-power, easy deployment and low cost are the most important factors to be deployed for WSNs. Lots of researches have been studied to meet those requirements, especially on the node capacity and battery lifetime improvements. Recently, the study of wireless mesh networks applied into the surveillance systems has been proceeded as a solution of easy deployment. In this paper, we proposed large-scale intelligent multi-layer surveillance systems based on QoS assuring Wireless Mesh Networks and implemented them in the real testbed environment. The proposed system explains functions and operations for each subsystem as well as S/W and H/W architectures. Experimental results are shown for the implemented subsystems and the performance is satisfactory for the surveillance system. We can identify the possibility of the implemented multi-layer surveillance system to be used in practice.

시스템 요소분석에 의한 지능형주거 디자인원리에 관한 연구

윤태호(Yoon Tae-ho),김용성(Kim Yong-seong) 한국디자인학회 2000 디자인학연구 Vol.- No.38

철도차량 고무 현가부품의 내한성 시험기준연구

윤태호(Yoon Tae-Ho),장승호(Jang Seung-Ho),최병일(Choi Byoung-Il),이찬우(Lee Chan-Woo),나희승(Na Hee-Seung) 대한기계학회 2004 대한기계학회 춘추학술대회 Vol.2004 No.11

In this paper, the standard test methods at low temperature of rubber suspension components of railway vehicle are investigated and reviewed. In order to connect the TKR(Trans-Korean Railway)-TSR(Trans-Siberian Railway), it is necessary to evaluate the performance of rubber suspenion components of railway vehicle. In the current Korean Standard, the test method at low temperature of railway vehilce components and the test method of rubber bellows of air spring are specified. But, the specified test temperature is higher than the the operating temperature of TSR railway. So, the in-depth research for the test method and performance evaluation technique of rubber suspension component at low temperature is necessary and current KS code should be adjusted.

사용하중을 받는 RC보의 탄소섬유 휨 보강에 관한 해석적 연구

윤태호(Yoon, Tae-Ho),강경수(Kang, Kyung-Soo) 한국산학기술학회 2011 한국산학기술학회논문지 Vol.12 No.8

본 연구에서는 사용 중에 있는 철근콘크리트 보의 사용하중 단계에 따른 탄소섬유 보강 후의 휨보강 효과를 분석·고찰하였다. 사용하중을 받는 RC 보의 탄소섬유시트 보강에 따른 원부재와의 초기변형률 차이와 하중상태에 따 른 잔류변형률의 영향을 고려하고, 보강 후 거동에 영향을 미치는 해석변수들에 대한 비선형 단면해석을 수행하여, 보강단계에 따른 보강보의 거동특성 및 보강효과에 대해 고찰하고, 기존 실무에서 보강설계시 가장 많이 사용되는 신 영수-홍건호식과 비교·검토하였다. 보강 겁수, 인장철근비, 단면치수비를 변수로 한 변수 해석을 수행하여 보강단계에 따른 휨강도의 변화를 확인하고 보강 시기에 따른 휨강도를 계산하고 휨보강 효과를 분석하였다. In this study flexural strength of damaged concrete beams reinforced by CFS is analysed. Nonlinear section analysis is used to include stress status of tension bars and compressive concrete under loads acting on the original member at the time of strengthening. Calculated flexural strength is compared with Sin-Hong formula which is frequently used in CFS reinforcement design. Nonlinear analysis with variation of the number of strengthening CFS, the ratio of tensile reinforcement, the ratio of section dimension shows that the flexural strength of CFS reinforced beams much depends on reinforcing stage. From the result of this analysis, the flexural strength of CFS reinforced concrete beam is reduced according to the magnitude of pre-loaded service loads.

조적벽의 전단강도를 고려한 철근콘크리트골조의 비탄성 거동

윤태호(Yoon, Tae-Ho),강경수(Kang, Kyung-Soo) 한국산학기술학회 2011 한국산학기술학회논문지 Vol.12 No.9

본 연구는 조적 끼움벽을 고려하지 않은 기존 학교건물의 비탄성 거동과 조적 끼움벽을 고려한 기존 학교 건물의 거동특성을 비교 검토하였다. 해석 결과와 실험 결과를 비교했을 때 하중-변위 곡선과 소성힌지 분포상태에 서 유사함을 확인할 수 있었다. 따라서 조적 끼움벽을 고려한 비선형 정적해석의 유효성을 검증하였다. 골조내부가 전부 조적벽으로 채워진 경우 조적벽체의 영향에 의하여 초기 강성과 강도가 증가하고 항복 전까지는 근 사한 거동을 보여주며 항복이후에는 변형이 커질수록 오차가 증가하며, 골조높이의 2/3 높이가 조적벽으로 채워진 경우 초기 강성과 항복강도가 단순골조에 비하여 약간 크게 나타나고 있으며, 조적벽체의 균열이 발생한 이후에는 급격히 강도가 저하되고 있다. 골조높이의 1/3 높이가 조적벽으로 채워진 경우 초기 강성과 항복강도가 단순골조와 비슷하며 항복점은 오히려 단순 골조의 항복점보다 저하되나, 최대강도는 단순 골조와 유사하다. Pushover 해석에 의 한 하중-변위 관계곡선과 실제 실험에 의한 하중-변위 관계곡선을 비교해 보면 항복 전까지는 근사한 거동을 보여주 며 항복이후에는 변형이 커질수록 오차가 증가하나 실제 구조물에서는 변형의 한계가 존재하므로 해석모델로서 유용 하게 사용할 수 있다. In this study the inelastic behavior of the existing school buildings with infilled masonry walls is analysed by pushover method. The shear stiffness and strength of masonry wall is calculated from the prior experimets and verified by inelastic analysis. The height of infilled masonry wall affects the structural behavior. The higher the masonry wall height, the higher the initial shear stiffness and strength of masonry wall. As the cracks are developed, the strength of masonry wall is much decreased. The proposed inelastic analysis method shows similar results with the experiments and can be used as inelastic analysis model of reinforced concrete buildings with infilled masonry walls.