http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
혼합슬래그 잔골재를 사용한 모르타르의 유동성 및 강도특성
오태규 ( Oh Tae Gue ),김지환 ( Kim Ji Hwan ),배성호 ( Bae Sung Ho ),이재인 ( Lee Jae In ),노영환 ( Rho Youngn Hwan ),최세진 ( Choi Se Jin ) 한국건축시공학회 2020 한국건축시공학회 학술발표대회 논문집 Vol.20 No.1
This study is part of the research for improving the performance of mortar and concrete using blended slag aggregate to develope economical and high quality replacement aggregate. The characteristics of the fluidity and strength of mortar using the blended slag, which replaced the blended slag aggregate by 0, 25, 50, 75, 100% for the aggregate volume, were compared and analyzed.
PCC(Powder Compacted Capsule)를 혼입한 모르타르의 유동성 및 압축강도특성
오태규 ( Oh Tae Gue ),최세진 ( Choi Se Jin ) 한국구조물진단유지관리공학회 2019 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.23 No.2
본 연구는 콘크리트 구조물의 균열 및 유지보수에 대한 문제점을 개선시키기 위한 연구의 일환으로 자기치유형 고상캡슐(PCC)의 대체율에 따른 모르타르 플로우 및 압축강도를 측정·분석 하였다.
인공경량골재 Pre-wetting수로 회수수를 적용한 경량모르타르의 유동성 및 압축강도 특성
오태규 ( Oh Tae-gue ),배성호 ( Bae Sung-ho ),이동주 ( Lee Dong-joo ),최세진 ( Choi Se-jin ) 한국건축시공학회 2019 한국건축시공학회 학술발표대회 논문집 Vol.19 No.2
In this study, the fluidity and compressive strength of lightweight mortar using recycling water for pre-wetting of artificial lightweight aggregate were compared and analyzed to maximize the utilization of the recycling water, which is a by-product of the Ready-Mixed Concrete industry. For this purpose, the pre-wetting water was replaced with recycling water at the ratio of 0, 2.5, 5, 7.5 and 10%.
오태규 ( Oh Tae-gue ),배성호 ( Bae Sung-ho ),김지환 ( Kim Ji-hwan ),김상억 ( Kim Sang-eok ),최세진 ( Choi Se-jin ) 한국구조물진단유지관리공학회 2020 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.24 No.2
본 연구는 회수수를 사용한 경량모르타르의 공학적 특성에 미치는 영향을 검토하여, 효과적으로 레미콘 산업부산물인 회수수의 재활용율을 높이기 위한 연구의 일환으로 회수수를 인공경량골재의 프리웨팅수량 및 배합수에 대하여 0, 2.5, 5, 7.5, 및 10% 혼입하여 제조한 경량모르타르의 강도 및 탄산화특성 등을 비교·분석하였다.
회수수를 사용한 경량골재 모르타르의 강도, 건조수축 및 중성화 특성에 관한 연구
오태규 ( Oh Tae-gue ),김지환 ( Kim Ji-hwan ),배성호 ( Bae Sung-ho ),최세진 ( Choi Se-jin ) 한국건축시공학회 2020 한국건축시공학회지 Vol.20 No.5
본 연구는 콘크리트산업 부산물인 회수수의 안정적인 재활용과 경량골재 콘크리트의 활성화를 위한 연구의 일환으로 회수수를 인공경량골재의 프리웨팅수 및 배합수로 적용한 경량골재 모르타르의 특성을 비교·분석하였다. 연구결과 프리웨팅수 및 배합수내의 회수수 농도 5%인 RW5 배합의 압축강도가 약 45.2~53.9MPa 수준으로 모든 재령에서 가장 높은 압축강도를 발현하였다. 인장강도의 경우 회수수 농도에 관계없이 재령 28일에 약 3.4~3.8MPa를 발현하여 압축강도 값의 7~9% 수준으로 나타났으며, 건조수축의 경우 RW2.5배합에서 재령 56일에 약 0.107%로서 가장 낮은 수축률을 나타내었다. 또한 촉진중성화 시험 결과 RW5 배합에서 약 1.75mm로 다른 배합에 비해 낮은 촉진 중성화 깊이를 나타내어 본 연구대상인 경량골재 모르타르의 경우 회수수 농도 5% 수준에서 우수한 압축강도특성과 중성화 저항성을 나타내었다. This study is to compare and analyze the strength, drying shrinkage and carbonation properties of lightweight aggregate mortar using recycling water as prewetting water and mixing water. The flow, compressive strength, split tensile strength, drying shrinkage and carbonation depth of lightweight aggregate mortar with recycling water were measured. As test results, the mortar flow was similar in all mixes regardless of the recycling water content. The compresseive strength of the RW5 mix with 5% recycling water as prewetting water and mixing water was the highest value, about 53.9 MPa after 28 days. In addition, the tensile strength of lightweight mortar was about 3.4 to 3.8 MPa, indicating 7 to 9% of the compressive strength value regardless of recycling water content. In the case of drying shrinkage, the RW2.5 mix using 2.5% recycling water showed the lowest shrinkage rate as about 0.107% at 56 days. The drying shrinkage of the plain mix without recycling water was relatively higher than the RW2.5 and RW5 mix. The RW5 mix showed lowest carbonation depth compared to other mixes. In this study, the RW5 lightweight aggregate mortar with 5% recycling water exhibits excellent compressive strength and carbonation resistance. Therefore, it is considered that if the recycling water, a by-product of the concrete industry, is properly used as prewetting water and mixing water of lightweight mortar and concrete, it will be possible to increase the recycling rate of the by-product and contribute to improve the property of lightweitht aggregate mortar and concrete.