http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
플라즈마 용사방식에 의해 형성된 페라이트-탄화규소 표면층의 마이크로파 흡수 특성(II)
신동찬,손현,Shin, Dong-Chan,Son, Hyon 한국통신학회 1993 韓國通信學會論文誌 Vol.18 No.8
레이다의 추적 및 탐색으로 부터 비행 물체를 보호하기 위한 목적으로, 알루미늄 합금표면에 페라이트-탄화규소 복합물인 마이크로파 흡수층을 플라즈마 용사방식으로 제작하였다. 본 논문에서는 페라이트-탄화규소층(I) 제조시 사용했던 탄화규소 입자의 평균크기인 34[rm]대신에15[rm]가 사용되었으며, 플라즈마 용사변수들 중에서 분말의 공급비율은 70[Kg/h]대신에 50[Kg/h] 그리고, 용사거리는 80[mm[ 대신에 100[mm]가 사용 되었다. X-band(8~12.4(GHz)레이다용 페라이트-탄화규소 전자파 흡수체를 실험적으로 설계하고 시험제작하여 전기적 특성을 평가한 결과, -lOdB의 반사량을 허용한도로 했을 때 약 2.8%의 대역폭이 얻어졌으며, 최대 흡수두께는 0.5(mm)로 매우 양호한 박층형 전자파 흡수체가 얻어졌다. Plasma spraying method was used to fabricated the microwave absorbing ferrite-silicon carbide on the aluminum-alloy of the fuselage of an aircraft to protect it from RADAR detection. In this paper 15[rm] instead of 34[rm], the mean size of SIC-powder for ferrite-silicon carbide surface films(I) was used. 50(Kg/h) Instead of 70(Kg/h), the powder feed and 100[mm] Instead of 80(mm), spray distance of spray parameters was used. This M/W absorbers were designed experimentally and fabricated trially, as a result of which the relative frequency bandwidth of 2.8% were obtained under the tolerance limits of the reflection coefficients lower than-10[dB], and the maximum absorption thickness becomes 0.5[mm], which is much thinner than that of the conventional ones.
플라즈마 용사방식에 의해 형성된 탄화규소-페라이트 표면층의 마이크로파 흡수특성(I)
신동찬,손현,Shin, Dong-Chan,Son, Hyon 한국통신학회 1992 韓國通信學會論文誌 Vol.17 No.6
비행물체에 대한 레이다의 추적 및 탐색거리를 축소시키는 전자방어책의 일환으로 물리적, 기계적 특성이 우수한 전자파 흡수층을 제작하기 위해서 플라즈마 용사방삭을 이용하였다. 이 코팅층은 종래의 M/W흡수층 제작에 사용하던 도전재료인 탄소대신에 탄화규소를, 자성손실재료로는 Ni-Zn ferrite를, 그리고 보지재를 사용하는 대신에 이들 재료분말을 기계적으로 혼합하여 플라즈마 용사코팅으로 모재 표면에 직접 흡수층이 형성되도록 했다. X-band(8~13 GHz)레이다용 탄화규소-페리이트 전자파 흡수체를 실험적으로 설계하고 시험제작하여 전기적 특성을 평가한 결과, -6dB(M/W 에너지 흡수율 75%)의 반사량을 허용한도로 했을경우 약 7.6~8.4%의 대역폭이 얻어졌으며, 최대 흡수두께가 0.5~0.55mm로 매우 양호한 박층형 전자파 흡수체가 얻어졌다. Plasma-spraying was conducted to produced the microwave absorbing surface films on the alumi-num-alloy used for the fuselage to protect the aircraft against the RADAR detction. The surface films were produced by plasma-splaying the mecharucally mixed composite powders of the silicon carblde and Ni-Zn ferrite. This M /W absorbers were designed experimentally and fabricated trialty, as a result of which the rolative frequency bandwidth of 7.6 to 8.4% were obtained under the tolerance limits of the re-flection coefficients lower than -6dB(absorption ratio 75%), and the maximum absorption thickness becomes 0.5 to 0.5.imm, which Is much thinner than that of the conventional ones.
기판의 접촉각과 분말량이 자기조립을 통해 형성된 SiO2 광자결정의 광특성에 미치는 영향
신동찬,오용택,김명순 한국세라믹학회 2005 한국세라믹학회지 Vol.42 No.7
This study investigated the effects of the substrate and powder content on the fabrication of SiO2 photonic crystals by evaporation method. Photonic crystals were self-assembled on quartz, corning 1737 glass, slide glass, and ITO glass to verify the effects of the wetting angle and surface morphology. The powder contents of the solution were varied from 0.2 to 2.0 wt%. The number of photonic crystal layers increased according to the decrease of wetting angle and surface roughness. The resultant photonic crystals showed the best optical characteristics when the number of photonic crystal layers was within 40 and 50. In addition, the intensity peak of Fabry-Perot fringes increased when the wetting angle was large and the particle size was small. Photonic crystals coated on ITO glass showed the highest reflectance peak of 63% relative intensity. 증발법을 이용한 실리카 광자결정의 제조에 미치는 기판의 종류와 용액중의 분말량의 효과에 대하여 연구하였다. 접촉각과 표면효과를 살펴보기 위하여 quartz, corning 1737 glass, slide glass, ITO glass 등의 다양한 기판 위에 광자결정을 형성시켰다. 용액 중에 분산하는 나노분말 양은 0.2~2.0 wt%로 변화시켰다. 광자결정의 두께는 기판과 용액의 접촉각과 표면의 RMS 거칠기 값이 작을수록 증가하였다. 광자결정 층의 두께가40~50 층일 때 가장 좋은 광학적 특성을 나타냈다. 빛의 회절에 의해 나타나는 Fabry-Perot fringes 피크의 강도는 접촉각이 큰 기판과 작은 입자를 사용할수록 증가하였다. ITO 유리기판을 사용하였을 때 상대적인 반사율 피크가 가장 높은 값인 63%를 얻었다.