단판 적층성형 학생용 책상.의자의 제조적성

서진석,박종영,한기만,Suh, Jin-Suk,Park, Jong-Young,Han, Ki-Man 한국가구학회 2005 한국가구학회지 Vol.16 No.2

As physical condition of students improves, there is a need to develop human body-friendly desk and chair for students. In this study, desks and chairs were manufactured with curved veneer lamination under high frequency heating and pressing, using ten wood species such as Japanese red pine, Korean pine, pitch pine, Japanese larch, yellow poplar, black locust, oak, radiata pine, beech, and birch. The performance of these products were evaluated. The results obtained were summarized as follows; With high frequency heating, the turned lamination of veneers with full size sheet ($3{\times}6\;feet$) prepared by rotary lathe peeling was successfully applied for making the members of desk top, leg frames of desk and chair. Bending strengths of desk tops were relatively greater for yellow poplar, black locust and red pine, which were similar to those of beech and birch. Bending strengths of desk legs were classified into greater species group (red pine, yellow poplar, larch) and lower species group (radiata pine, Korean pine, pitch pine). Compressive strengths of chair legs in parallel direction to the lamination were greater in black locust and larch. On the other hand, differences between outer and inner gap at the top and drawer bottom of desk top were rather larger for the laminations of birch and beech, and less for those of yellow poplar and pitch pine, showing greater stability of open drawer space. In results, yellow poplar, larch, pitch pine and red pine showed good appearance and strength properties at the curved veneer lamination. Accordingly, it was believed that these domestic woods were able to substitute for birch which was being imported for the use of veneer-laminates type furniture.

합판분야의 연구동향과 전개방향

서진석 ( Jin Suk Suh ) 한국목재공학회 1994 목재공학 Vol.22 No.3

간질성 폐섬유화증의 병리조직학적 검색

서진석 ( Jin Suk Suh ),함의근 ( Eui Keun Ham ) 대한결핵 및 호흡기학회 1990 Tuberculosis and Respiratory Diseases Vol.37 No.2

라디에타소나무 단판적층재의 밀도,접착,강도성능 및 내부후성

서진석 ( Jin Suk Suh ),이동흡 ( Dong Heub Lee ),황원중 ( Won Joung Hwang ),오형민 ( Hyung Min Oh ),박영란 ( Young Ran Park ),강승모 ( Sung Mo Kang ) 한국목재공학회 2011 목재공학 Vol.39 No.4

라디에타소나무 단판적층재(LVL)를 제조함에 있어서, CuAz 및 ACQ 방부처리와 비처리, 수성비닐우레탄 접착제와 페놀변성 리조시놀수지 접착제의 상온경화형 접착제를 적용함에 따른 밀도경사, 접착·강도성능 및 내부후성(방부효력)을 살펴보았다. 결과, LVL의 밀도경사에서 접착층 주변이 원추형으로 밀도가 커지는 경사패턴을 보였다. 접착성은 수성비닐우레탄 접착의 경우, 자비반복시험 후 전층이 박리되거나, 일부 층이 박리하고 할렬·틈새 현상이 일어났다. 페놀변성 리조시놀수지 접착제 접착의 경우, 자비반복시험 후 접착층의 응력이 큰데 연유한 굽음과 상하 접착층 사이의 단판의 수직할렬 현상이 있었으나, 접착층의 박리나 할렬이 거의 발견되지 않아 침지박리접착력은 높은 것으로 판단되었다. 한편, 방부효력시험에 있어서, 수성비닐우레탄 접착제로 적층한 LVL의 경우 갈색부후균에 의한 부후도가 백색부후균보다 크게 나타났다. 페놀변성 리조시놀수지 접착제로 LVL을 제조한 경우에는 갈색부후균에 의한 질량감소가 적었고, 약제를 처리하지 않더라도 그 피해가 낮았으며, 약제처리한 것은 질량감소율 0 수준을 보일 정도로 방부효력이 큰 것을 알 수 있었다. In this study, LVLs of radiata pine were fabricated with non-preservative treated veneers, CuAz treated veneers, and ACQ treated veneers, using aqueous vinyl urethane adhesive and phenol modified resorcinol resin adhesive. Then density gradient, bonding strength, bending properties and decay resistance of LVLs were evaluated. As results, the cone-shaped and higher density gradient pattern was found in layer close to glueline. After cyclic water boiled test, the LVL bonded with aqueous vinyl urethane resin adhesive was delaminated in all layers or partly delaminated including check, chasm in glueline layer. In the case of LVL bonded with phenol modified resorcinol resin adhesive, despite slight cupping due to great glueline stress and vertical check between glueline layers, it was observed that the bonding strength to delamination was higher, owing to most absence of delamination through overall glueline. On the other hand, in the decay test, mass loss by brown rot fungi was greater than white rot fungi in LVL bonded with aqueous vinyl urethane resin adhesive However, in LVL bonded with phenol modified resorcinol resin adhesive, the mass loss by brown rot fungi was slight and non-preservative treated LVL was low. The mass loss of preservative-treated LVL was 0 (zero), showing the high decay resistance effect.

원통형 단판적층재의 접착성 및 도장처리에 따른 표면내구성

서진석 ( Jin Suk Suh ),김종인 ( Jong In Kim ),황성옥 ( Sung Wook Hwang ),박상범 ( Sang Bum Park ) 한국목재공학회 2012 목재공학 Vol.40 No.6

원통형 단판적층재(LVL)의 구조재 이외의 공예재 등의 용도개발을 위하여 원통형 단판적층재의 내수접착성과 도장처리에 따른 내마모성 및 표면경도를 측정하였다. 레조시놀 수지와 경화제(paraformaldehyde)를 100 : 5의 혼합비로 하여 접착·경화한 원통형 단판적층재의 전체적인 접착층에 대한 삶음박리 접착력은 양호한 편이었다. 내마모성은 횡단면이 접선단면보다 상대적으로 우수하였으며, 접선단면에 자외선 차단 오일을 도장 처리한 경우 내마모성이 향상되었다. 표면경도는 횡단면의 경우, 낙엽송 중심재가 라디에타소나무 단판적층 부위보다 높았고, 접선단면의 경우에는 접착층 부위가 단판부위보다 높게 나타났다. In order to develop the end use of cylindrical laminated veneer lumber LVL) such as wooden crafts, the water proof-bonding strength, the resistance to abrasion and the surface hardness by painting the surface of LVL were investigated. The study results were as follows: The water proof-bonding strength through 5 cyclic test by boiling in water immersion and drying were favorable without delamination of glue line. Then the formulation of glue was resorcinol resin (100) to hardener of paraformaldehyde(5)by mixed weight percentage. The resistance to abrasion was relatively higher at cross section than tangential section. When tangential section of LVL was painted by UV protection oil, the resistance to abrasion was improved. In case of a cross section of LVL, the higher surface hardness appeared at larch core than radiate pine LVL. Also, in case of a tangential section of LVL, the higher surface hardness appeared at glue line veneer side.

OSB 대체용 국내산 합판의 못 접합부 전단내력 성능

서진석 ( Jin Suk Suh ),황성욱 ( Sung Wook Hwang ),황권환 ( Kweon Hwan Hwang ),정기영 ( Gi Young Jeong ),정하현 ( Ha Hyun Joung ) 한국목재공학회 2012 목재공학 Vol.40 No.4

본 연구에서는 현재 국내 목조건축에서 벽구성 재료로 많이 사용되고 있는 수입 OSB(배향성 스트랜드보드)를 국산 합판으로 대체하기 위해 OSB와 국산 합판의 못 접합부 전단성능을 비교·검토하였다. 주부재(잣나무)와 측면부재(OSB·합판)의 섬유 방향성(평행·직각)에 따른 전단성능은 합판에서 현저하였다. 결과, OSB와 합판 모두 현행 국내 기준인 못 접합부 기준 허용전단내력을 만족하는 것으로 나타났다. 그리고, 표면층에 MLH(열대산 활잡목)를 사용하고 7ply 구성한 합판(P-4 type)은 OSB보다 섬유방향에 관계없이 큰 전단성능을 나타냈다. 전반적으로 측면부재로서 합판을 사용할 경우 주부재에 대하여 섬유방향을 직교되도록 구성할 경우,평행방향 구성보다 큰 전단성능을 발휘할 수 있음이 확인되었다. This study was carried out in order to compare nail shear strength between domestic plywood and imported OSB for structural sheathing members as infill wall of wooden construction. The differences of nail shear strength between parallel-to-grain direction and perpendicular-to-grain direction of sheathing material to frame material were distinct at the plywood composition. The shear strengths of plywood and OSB with nail met current design values. The plywood of P-4 type, which uses MLH at surface layer and constructs 7 ply, showed greater than OSB regardless of grain direction of sheathing material to frame material. When the plywood as sheathing material to frame material was used, it was found out that the overall construction of perpendicular-to-grain direction of plywood had greater nail shear strengths than the construction of parallel-to-grain.

한국인 소아에서 실시간 중합효소연쇄반응으로 검출된 Epstein-Barr virus 바이러스혈증의 임상적 고찰

고일용,서진석,김황민,손준형,예병일,이택진,김동수,Ko, Il Yong,Suh, Jin Suk,Kim, Hwang Min,Sohn, Joon Hyung,Yeh, Byung-Il,Lee, Taek Jin,Kim, Dong Soo 대한소아감염학회 2007 Pediatric Infection and Vaccine Vol.14 No.2

목 적 : EBV 감염은 발생 연령에 따라 혈청학적으로 진단되지 않을 수 있으며, 이 때 실시간 중합효소연쇄반응이 대신할 수 있는 진단 방법이다. 본 연구는 임상적으로 EBV 감염이 의심되는 환자에서 각각 혈청학적 검사 양성인 경우와 실시간 중합효소연쇄반응 양성인 그룹간의 임상양상을 비교하고자 하였다. 방 법 : 2004년 1월부터 2006년 12월까지 EBV 감염이 의심되는 45명의 환자를 대상으로 EBV 실시간 중합효소연쇄반응 검사를 시행하여 EBV 바이러스혈증의 존재 여부를 확인하였다. $102.5copies/{\mu}g$ DNA를 EBV 연관질병의 결정 수준으로 삼았다. 결 과 : EBV 감염이 혈청학적으로 진단된 환자는 4명이었으며 실시간 중합효소연쇄반응으로 EBV 바이러스혈증이 확인된 환자는 15명이었다. EBV 바이러스혈증이 있는 환자군의 나이는 4세 미만이 73%(11/15)였고 남녀비는 1:1.3 이었다. 입원 시의 임상증상은 발열이 73%(11/15), 인두 발적이 67%(10/15)에서 보였으며 동반된 질환으로는 급성 위장관염과 폐렴이 각각 20%(3/15)였다. 비정형 림프구가 15% 이상인 경우는 27%(4/15)에서 보였고 AST, ALT의 증가가 각각 87%(13/15), 80%(12/15)였다. CRP가 2 mg/dL 이하인 경우는 87%(13/15)였다. EBV 바이러스혈증 환자중 1세 미만은 5명으로 이들 중 80%(4/5)에서 발열이 동반되었고 비정형 림프구는 보이지 않았으며 모두 AST, ALT가 증가하였다. 혈청학적으로 진단된 환자군의 나이는 1-6세였고 75%(3/4)에서 간비대와 비장비대가 보였으며 50%(2/4)에서 발열, 인두발적, 경부 림프절 종대가 보였다. 동반된 질환은 없었으며 백혈구가 모두 $20,000/mm^3$ 이상이었고 50%(2/4)에서 비정형 림프구가 증가했으며 AST, ALT가 50 IU/L 이상으로 상승하였다. CRP는 모두 1 mg/dL 이하였다. 결 론 : 혈청학적 검사에서 진단되지 않았더라고 실시간 중합효소연쇄반응에서 EBV 바이러스혈증을 보인 환자는 EBV 감염의 일반적인 임상증상을 보였다. 따라서 EBV 감염이 의심되는 환자, 특히 1세 미만의 환자는 혈청학적 검사가 음성이어도 실시간 중합효소연쇄반응을 통해 바이러스 혈증을 확인하는 것이 EBV 감염의 진단률을 높이는데 의미가 있을 것으로 사료된다. Purpose : We investigated clinical characteristics of real-time PCR proven EBV viremia patients who were not serologically diagnosed but clinically suspected, and compared it to serologically proven EBV infected patients. Methods : The study population consisted of 45 patients, who were suspected acute EBV infection at Wonju Christian Hospital Department of Pediatrics, Yonsei University Wonju College of Medicine from Jan. 2004 to Dec. 2006. real-time PCR of cell free serum was performed to prove EBV viremia. Then we chose $102.5copies/{\mu}g$ DNA as a suitable cutoff level for EBV associated diseases. Results : There are 4 patients diagnosed as EBV infection by serologically and 15 patients diagnosed as EBV viremia by real-time PCR quantitative measurement. The most common presenting symptoms and signs of EBV viremia was fever in 11 cases (73%). Atypical lymphocytosis was found in 4 cases (27%). Increased AST, ALT levels were observed in 13 cases (87%), 12 cases (80%), respectively. We could diagnose 5 cases of EBV viremia younger than one year of age. They revealed clinical symptoms which could be found in EBV infection. The serologically diagnosed patients had hepatomegaly and splenomegaly in 3 cases (75%). All serologically confirmed patients have leukocytosis above $20,000/mm^3$, among them 2 cases (50%) had higher percentage (>15%) of atypical lymphocytes. The AST/ALT level above 50 IU/L were demonstrated in all cases. Conclusion : Serologically unproven real-time PCR EBV viremia patients revealed similar clinical findings with that of serologically proven EBV infected patients. So, it is meaningful to perform EBV real-time PCR for the diagnosis of EBV infection especially for the cases younger than 1 year of age.

폐목재파티클을 이용한 재생보드의 제조특성

김외정,서진석,한태형,박종영,Kim, Wae-Jung,Suh, Jin-Suk,Han, Tae-Hyung,Park, Jong-Young 한국건설순환자원학회 2006 한국건설순환자원학회지 Vol.2 No.1

폐목질원료로서, 제재, 합판, PB, MDF와 폐침목 등의 해머밀에 의한 파쇄특성과 재생파티클 종류와 혼합비율에 따른 재생보드의 물성을 구명함으로써, 보드원료로서 재자원화 하는 방안을 모색해 보고자 하였다. 그 결과, 재생보드의 휨성질은 목질원료의 입자형태 및 입도분포에 크게 영향을 받으며, 파티클, 섬유와 같은 element가 압축고화된 상태의 판넬(PB, MDF)로부터 재생한 파티클은 물성저하를 초래하였다. 그러나, 재생파티클에 이미 도포 경화된 수지에 의해 재생보드의 치수안정성이 향상되는 효과가 있다. 따라서, 보드원료로서의 적합한 요건은 건전폐목재(제재, 합판)와 저급폐목재(PB, MDF)의 적정한 혼용에 있다고 할 수 있다. 본 연구에서는 건전폐목재 재생파티클과 재생 PB파티클의 혼용시험에서 제재파티클이 휨성질(MOR, MOE)과 박리강도에 기여하고, 합판파티클은 치수안정성에 더욱 기여하는 경향을 나타냈다. 또한 보드의 중층용 원료로 재생PB파티클의 혼합비율을 증가함에 따라서 보드의 휨성능이 감소되는 경향을 나타냈지만 혼합률 40%까지는 유의차가 없이 보드 15형(MOR : $153kgf/cm^2$, MOE : $27.5tonf/cm^2$) 수준의 성능이 구비되었다. 향후 생활폐목재(폐가구 등)와 같은 저급폐목재의 활용방안이 강구된다면 보드원료의 수급에 한층 기여할 수 있을 것이다. The hammer-milled characteristics of waste wood materials such as lumber, plywood, particleboard(PB), MDF and railroad tic were investigated in this study. The physical and mechanical properties of recycled boards according to types of recycled particle and the mixing ratios were also studied. The hammer-milled, waste wood materials had the dimensional distributions suitable for the core layer panicle. Bending strengths of recycled boards (one layer) were shown in order of plywood, PB(laboratory-fabricated with particles used in the PB factory), lumber, tego film-overlaid plywood, MDF, waste railroad tie, PB(factory-made) and LPL-overlaid PB. Cured resin and creosote containing waste wood contributed to dimensional stability of reconstituted boards. Considering the mixing effects between lumber and plywood with recycled PB particle, lumber particle was contributive to bending strength, MOE and internal bond(IB) strength, whereas plywood particle was contributive to dimensional stability. The bending and IB strength of 3 layer boards composing only recycled waste wood particles in core layer of board were in order of lumber, plywood, PB and MDF. On the other hand, the thickness swelling was in order of PB, lumber, plywood and MDF. Bending strength of the 3 layer boards mixed with recycled PB-particle in the core layer had a decreasing tendency, as the mixing ratios of recycled PB-particles increased. The dimensional stability of 3 layer recycled board was improved as the mixing ratio of recycled PB-particle increased same as in one layer. Formaldehyde emission of boards fabricated with recycled PB-particles in the core layer of the PB was in the range of E2 grade (below 5.0mg/l).

난소 섬유종과 포막종의 호르몬 분비능에 관한 연구

이숭덕,서진석,한영미,김정란,서정욱,함의근,이효표,Lee, Soong-Deok,Suh, Jin-Suk,Han, Young-Mee,Kim, Jung-Ran,Seo, Jeong-Wook,Ham, Eui-Keun,Lee, Hyo-Pyo 한국현미경학회 1989 Applied microscopy Vol.19 No.1

Six cases of ovarian fibrous stromal neoplasm were studied clinically, light microscopically and ultrastructurally for the clinico-pathological evidences of hormone production. Of the six cases, two cases were fibroma, three cases were fibrothecoma, and one case was thecoma. Two cases of fibroma and one fibrothecoma were associated with clinical history of menstrual abnormality, however fat staining of the tumor was negative or weakly positive. Two cases of fibrothecoma and one thecoma were negative for the clinical history of hormone imbalance. Fat stain of those cases revealed positive in varying intensity. Ultrastructural examination of fibroma-thecoma group revealed dark and pale cells by their nuclear characteristics. The dark cells had indented nucleus and abundant cytoplasmic organelles of rough ER, Golgi apparatus and mitochondria. Intracytoplasmic cisternal spaces were seen in the dark cell cytoplasm and some lipid droplets were seen around the cisternae. Pale cells had pale swollen nucleus and fine chromatins. Their cytoplasm showed scanty amount of organelles. Fibroma-thecoma spectrum showed varying degree of population of dark cells, light cells and intervening collagenous stroma. Lipid droplet was structurally associated with intracytoplasmic cisterna and they were frequently seen in thecoma and two of the fibrothecoma. But clinical history of hormone imbalance was poorly related to the light microscopic morphology and ultrastructural organization.

마이크로파 가열 단판의 함수율 변화 및 열분포 특성

신기훈 ( Ki Hoon Shin ),서진석 ( Jin Suk Suh ),박철우 ( Cheul Woo Park ),임남기 ( Nam Gi Lim ) 한국목재공학회 2014 목재공학 Vol.42 No.4

잣나무, 리기다소나무, 낙엽송, 백합나무 등 수종과 두께가 다른 평단판 및 단판롤(롤 형태의 단판)을 고정형 마이크로파로 가열하여 가열 전후 형상, 표면 함수율, 함수중량 변화와 표면 열분포를 분석한 결과는 다음과 같다. 평단판의 경우 마이크로파 가열에 따른 품질상태는 비교적 양호한 것으로 나타났지만, 약간의 뒤틀림이 발생하였으며, 이는 비균일 건조응력에 따른 변형과 고정형 마이크로파 장비의 특성상 단판 형태로 가열 시 국부적인 조사가 이루어진 영향이 컸기 때문으로 판단된다. 단판롤 형태의 마이크로파 가열 특성은 가열 후 품질 모두 양호하였으며, 특히 평단판에서 나타난 뒤틀림 등의 결함은 없는 것으로 나타났다. 또한 열분포 및 확산 등이 매우 안정적으로 이루어진 것으로 판단되며, 이러한 열분포는 표면 함수율 분포 및 함수중량 감소에 많은 영향을 미치는 것으로 나타났다. 따라서 단판롤형태는 수종 및 두께에 따라 출력과 조사시간 등 충분한 시험이 실시된다면, 고정형 장비에서도 충분한 건조효율을 나타낼 수 있을 것으로 판단된다. The analysis of shape before and after heating, Surface moisture content, Moisture weight change and surface heat distribution by fixed type microwave heating in forms of flat veneer and veneer roll of Korean pine, pitch pine, larch and yellow poplar was conducted. The results were as follows: In case of flat veneer, the quality after microwave heating was comparatively good, but it was somewhat warped. These phenomena may be due to transformation by nonuniform drying stress and stronger effect of local irradiation on the veneers when heating veneer owing to the characteristics of fixed type microwave equipment. In case of the features of roll-shaped veneer heated by microwave, the quality after heating was comprehensively excellent. Especially there was no warping unlike flat veneer. Heat distribution and diffusion were also very stable for roll-shaped veneer and such heat distribution had much influence on surface moisture content and moisture weight loss. Accordingly, the veneer roll would show sufficient drying efficiency in fixed type microwave equipment through a scrutinized examination on generating power and irradiation time according to species and thickness of veneer.