http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
황성욱,손성무,정성욱,Hwang, Seong-Uk,Son, Sung-Moo,Chung, Sung-Wook 한국정보통신학회 2022 한국정보통신학회논문지 Vol.26 No.5
블루투스 이어폰과 같은 대부분의 블루투스 장치는 무선이라는 편리성으로 다양하게 사용되지만 소형 무선기기라는 특성으로 자주 분실되는 단점이 있다. 그러나 대부분의 블루투스 장치에서는 합법적인 소유자에 대한 인증 기능 제공이 미흡하며, 분실된 블루투스 장치를 습득한 제 3자는 해당 기기를 손쉽게 자신의 스마트기기 등에 연결하여 사용할 수 있다. 본 논문에서는 분실이 잦은 블루투스 장치에서 NFT를 이용하여 합법적인 소유자를 인증하는 NBAS(NFT-based Bluetooth Device Authentication System)에 대해서 제안하였다. NBAS는 탈중앙화된 네트워크인 이더리움 블록체인을 활용하여 이더리움상에 디지털 지갑을 생성하고, 디지털 지갑에 블루투스 장치의 MAC 주소를 이용하여 NFT를 생성하고 보관한다. 지갑의 소유자는 개인키를 사용하여 NFT의 소유를 증명함으로써 블루투스 장치의 합법적인 소유자임을 인증하게 된다. NBAS는 평균 10.25sec의 초기 페어링 시간을 보였으며 재연결 시간은 0.007sec로 기존 방식과 비슷하며, 미승인 사용자에 대한 페어링 거절 시간은 평균 1.58sec로 측정되었다. 따라서 제안하는 NBAS는 미승인된 블루투스 장치의 연결을 방지하여 기존의 보안성이 약한 블루투스 인증 방식을 효과적으로 개선함을 보여준다.
황성욱,Hwang, Sung-Wook 대한심미치과학회 2014 Journal of the Korean Academy of Esthetic Dentistr Vol.23 No.2
In case of esthetic restorative procedure with zirconia restoration, we have to use resin cement because of not only just for retention but also esthetic reason. In such a clinical situation, we have to consider two bonding interfaces, one is tooth surface to resin cement and the other is zirconia surface to resin cement. There is well established bonding protocol between tooth surface to resin cement, but bonding protocol of zirconia surface to resin cement is still controversial. In scientific point of view, there are two mechanism for bonding of zirconia restoration.. One is mechanical retention and the other is chemical adhesion. However, we have three different options for bonding of zirconia restoration in clinical situation; 1) Tribo-chemical coating with silica and silane coupling agent 2) Zirconia primer with phosphate chemistry 3) Self-adhesive resin cement with phosphate chemistry.
광대역 종합 통신망 응용을 위한 8b 52 MHz CMOS 서브레인징 A/D 변환기 설계
황성욱,이승훈,Hwang, Sung-Wook,Lee, Seung-Hoon 한국전기전자학회 1998 전기전자학회논문지 Vol.2 No.2
본 논문에서는 광대역 종합 통신망 응용을 위한 8b 52 MHz CMOS 서브레인징 (subranging) A/D 변환기 (analog-to-digital converter : ADC)를 제안한다. 제안된 A/D 변환기는 새로운 방식의 동작 순서 기법을 사용하여 기존의 이중 채널 서브레인징 A/D 변환기 동작에 존재하는 홀딩 시간 (holding time)을 제거함으로써 신호 처리 속도 (throughput rate)를 50 % 향상시켰다. 또한, 하위 비트 A/D 변환기에서의 잔류 전압처리에 인터폴레이션 (interpolation) 기법을 이용하여 A/D 변환기의 비교기에 사용되는 프리앰프의 수를 50 % 수준으로 줄임으로써 면적을 감소시켰다. 시제품 A/D 변환기는 0.8 um n-well double-poly double-metal CMOS 공정으로 제작되었고, 측정 결과, 5 V 전원 전압과 52 MHz 샘플링 주파수에서는 230 mW, 3 V 전원 전압 및 40 MHz 샘플링 주파수에서는 60 mW의 전력을 각각 소모한다. This paper describes an 8b 52 MHz CMOS subranging analog-to-digital converter (ADC) for Integrated Services Digital Network (ISDN) applications. The proposed ADC based on the improved time-interleaved architecture removes the holding time which is typically observed in the conventional double-channel subranging ADCs to increase throughput rate. Moreover, the ADC employs the interpolation technique in the back-end subranging ADCs far residue signal processing to minimize die area and power consumption. The fabricated and measured prototype ADC in a 0.8 um n-well double-poly double-metal CMOS process typically shows a 52 MHz sampling rate at a 5 V supply voltage with 230 mW, and a 40 MHz sampling rate at a 3 V power supply with 60 mW power consumption.
특수일 이동을 고려한 전기자동차 충전부하의 전력계통 영향에 관한 연구
황성욱(Sung-Wook Hwang),김정훈(Jung-Hoon Kim) 대한전기학회 2016 전기학회논문지 Vol.65 No.2
In this paper, the power system with electric vehicles is analyzed considering the mobility and diffusion rate of electric vehicles in the smart grid environment. In the previous studies, load modeling and load composition rates have been researched and the results are applied to develop a new load model to explain the mobility of electric vehicles which could affect on the power system status such as power flow and stability. The results would be utilized to research and develop power system analysis methods considering movable charging characteristics of electric vehicles including movable discharging characteristics which could be affected by the diffusion progress of electric vehicles.
NLT-콘크리트 복합 슬라브의 수분 및 치수 거동 분석
황성욱 ( Sung-wook Hwang ),정현우 ( Hyunwoo Chung ),이태경 ( Taekyeong Lee ),안경선 ( Kyung-sun Ahn ),방성준 ( Sung-jun Pang ),방준식 ( Junsik Bang ),곽효원 ( Hyo Won Kwak ),오정권 ( Jung-kwon Oh ),여환명 ( Hwanmyeong Yeo ) 한국목재공학회 2022 한국목재공학회 학술발표논문집 Vol.2022 No.2
Nail-laminated timber (NLT)-합판 복합재와 상부 콘크리트로 구성된 NLT-콘크리트 슬래브의 수분 및 치수 거동을 385일 동안 모니터링 했다. 외기의 상대습도 변화는 NLT 복합재 내부의 수분 및 치수 변화를 야기했다. 모니터링 기간 동안 NLT 복합재의 평형함수율은 6.7%에서 15.3%로 증가하였으며, 이때 너비 방향 변형률은 0.58%였다. 콘크리트 타설은 NLT 복합재의 영구적인 폭 방향 증가를 초래했다. 폭 변형은 콘크리트 혼합물에 함유된 다량의 수분에 의한 영향보다 혼합물의 중량에 의해 못적층 구조가 느슨해진 결과인 것으로 해석되었다. NLT 복합재의 변형률이 복합재의 구성요소인 낙엽송 제재목과 합판의 변형률 총합보다 낮다는 결과로부터 NLT 구조의 치수안정화 효과가 확인되었다.