http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
UHF 대역 모바일 RFID 시스템에 적합한 저잡음 콜피츠 VCO 설계
노형환,박경태,박준석,조홍구,김형준,김용운,Roh, Hyoung-Hwan,Park, Kyong-Tae,Park, Jun-Seok,Cho, Hong-Gu,Kim, Hyoung-Jun,Kim, Yong-Woon 한국전자파학회 2007 한국전자파학회논문지 Vol.18 No.8
본 논문에서는 모바일 RFID 시스템 환경을 제시하였고, 그 환경에 적합한 저 잡음 차동 콜피츠 전압 제어 발진기를 구현하였다. 밀집 리더 환경에 맞춘 전압 제어 발진기는 $0.35{\mu}m$ 공정을 사용하였고, 주파수 범위는 RFID 주파수 범위인 $860{\sim}960 MHz$를 포함시킬 수 있도록 $1.55{sim}2.053 GHz$로 설계하였다. 2분주기 출력에서 측정한 위상 잡음은 오프셋 주파수가 40 kHz일 때 -106 dBc/Hz로 측정되었고, 1MHz일 때에는 -135 dBc/Hz로 측정되었다. 5 비트의 디지털 튜닝을 이용하여 낮은 발진기 이득(<45 MHz/V)을 갖게 하여 주파수 합성기에서의 위상 잡음 특성을 좋게 하였다. 설계한 차동 콜피츠 발진기의 FOM은 1.93 dB로 타 2 GHz 대역의 발진기들 보다 높게 측정되었다. A regulated low phase noise differential colpitts VCO(Voltage Controlled Oscillator) for mobile RFID system is presented. The differential colpitts VCO meets the dense reader environment specifications. The VCO use a $0.35{\mu}m$ technology and achieves tuning range $1.55{sim}2.053 GHz$. Measuring 910 MHz frequency divider output, phase noise performance is -106 dBcMz and -135dBc/Hz at 40 kHz and 1MHz offset, respectively. 5-bit digital coarse-tuning and accumulation type MOS varactors allow for 28.2% tuning range, which is required to cover the LO frequency range of a UHF Mobile RFID system, Optimum design techniques ensure low VCO gain(<45 MHz/V) for good interoperability with the frequency synthesizer. To the author' knowledge, this differential colpitts VCO achieves a figure of merit(FOM) of 1.93dB at 2-GHz band.
UHF 대역 모바일 RFID 시스템용 고선형 공통 게이트 저잡음 증폭기
노형환(Hyoung-Hwan Roh),오하령(Ha-Ryoung Oh),성영락(Yeong-Rak Seong),박준석(Jun-Seok Park) 대한전자공학회 2010 대한전자공학회 학술대회 Vol.2010 No.6
A CMOS common gate LNA with high linearity over UHF mobile RFID bands is presented. A common gate configuration applied to design the proposed LNA overall leads to high linearity and wide band characteristics. Proposed LNA is fabricated with 0.35μm (one poly, four metals) CMOS manufacturing technology. The proposed LNA shows 3.2dB noise figure, 13.4dB voltage gain with 1.4dBm P1dB.
단일 안테나를 사용하는 RFID에서의 Phase Shifter를 이용한 TX Leakage 제거 방식
전부원,배재현,노형환,정명섭,박준석,Jeon, Bu-Won,Bae, Jae-Hyun,Roh, Hyoung-Hwan,Joung, Myoung-Sub,Park, Jun-Seok 한국전자파학회 2007 한국전자파학회논문지 Vol.18 No.8
RFID 시스템에서는 현재 같은 주파수 대역에서 송신 단과 수신 단이 사용되며, 이에 따라 듀플렉서를 사용할 수 없게 되며 커플러를 사용하게 된다. 커플러를 사용함으로써 송신 누설 신호는 수신 단으로 직접적으로 영향을 주며, 이에 따라 태그의 인식 거리가 제한되는 부정적인 영향을 미치게 된다. 본 논문에서는 Rx 단으로 직접 적으로 영 향을 주는 Tx 누설 신호를 감쇄시키는 방법을 소개하고 ADS2006 시뮬레이션으로 이를 검증하였다 Rx and Tx signal use same band in RFID. Then RFID system is not used duplexer and used coupler. RFID system have problem about Rx part to Tx leakage signal because that Rx signal port is Tx signal port's Isolation port. We proposal using phase shifter Tx leakage signal decrease than other RFID system. It is same signal Tx signal port's coupling port and isolation port signal except amplitude and phase. So if make coupling signal and isolation signal is in all same signal. We cancel Tx leakage signal used coupling port. And verification about ADS2006.
마이크로 컨트롤러를 이용한 TX Leakage Canceller
박경태,정진우,노형환,김형석,박준석 한국정보통신설비학회 2008 한국정보통신설비학회 학술대회 Vol.2008 No.1
A transmitter (TX) leakage cancellation scheme using a Micro Controller Unit (MCU) is introduced. This paper highlights an adaptive anti-leakage signal generation via an MCU, which plays the key role in reducing the TX leakage signal level. High transmitter-to-receiver (TX-to-RX) isolation is verified with measurement results.
이동체 위치 인식을 위한 그리드 센서 네트워크의 효율적인 적용 방안 연구
서기원,김종철,노형환,오하령,성영락,박준석 한국정보통신설비학회 2008 한국정보통신설비학회 학술대회 Vol.2008 No.1
In this paper, we introduce the positioning methods using the grid sensor network. The basic operational principle of grid sensor network can be the wireless communication using the sensor node attached on the objects. Sink node receives the environmental information (e.g., temperature, humidity and so on), and transmits the information to the core database. Since the grid sensor network basically uses wireless communication, it is necessary to observe the place where grid sensor nodes to be installed. In this sense, we carried out the practical measurement on the wireless propagation in an applicable field. In addition, link budget study and SNR estimation works were done in accordance with the results from the measurement.