http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
공기 중 니코틴 포집에 있어 국산 확산포집기와 능동포집기의 비교 평가
김효철,백남원,이경숙,김경란,김원,Kim, Hyo-Cher,Paik, Nam-Won,Lee, Kyung-Suk,Kim, Kyung-Ran,Kim, Won 한국환경보건학회 2006 한국환경보건학회지 Vol.32 No.5
It is widely known that Environmental Tobacco Smoke(ETS) is not good for health. ETS is composed of a lot of chemicals. So indicators are needed to evaluate the risk of ETS in air. One of the indicators is Nicotine. Active sampler has been used to measure nicotine concentration in air. The experiments were conducted to compare the active sampler method with diffusive sampler in exposure chamber and smoking areas, respectively. Sampling rate was 40.5 ml/min in exposure chamber. Experimental sampling rate (40.5 ml/min) was more than theoretical sampling rate (33.52 ml/min). And the higher was the concentration in air, the higher was experimental sampling rate. The average desorption, rate was 113.6%. The overall precision was 7.31 %. The overall accuracy was 18.96%, which were under NIOSH criteria. The average(GM) concentrations of nicotine by two sampling methods were $8.29{\mu}g/m^{3}$ (active sampler), $7.54{\mu}/m^{3}$ (diffusive sampler) in smoking area and smoking room. There was no regression between active sampler and diffusive sampler ($R^{2}=0.2397$). But slope, coefficient of determination was 1.017, 0.9292, respectively after removing outliers. And the slope (1.017) was close to the theoretical slope (1). In conclusion, this study indicated that diffusive sampler can be used to evaluate concentration of nicotine in air instead of active sampler.
김효철,Kim, Hyo-Cheol 전국농업기술자협회 2010 농업기술회보 Vol.47 No.1
농촌이 고령화됨에 따라 농업인력의 상당수를 60세 이상의 고령자들이 담당하고 있는 것이 우리 농업의 현실이다. 이에 따라 고령의 농업인들이 건강상의 어려움과 농작업에서의 재해 위험에 크게 노출되어 있다.
김효철,김현철,유기영,Kim, Hyo-Cheol,Kim, Hyeon-Cheol,Yu, Gi-Yeong 대한전자공학회 2001 電子工學會論文誌-SP (Signal processing) Vol.38 No.4
본 논문에서는 퍼블릭 워터마킹(public watermarking)에서 영상 블록의 유효성에 기반을 둔 상호연관성(cross-correlation property)과 관련기법을 제안하였다. 이 과정에서 워터마크의 비인식성(imperceptibility)과 깨지기 쉬운 워터마크(fragile watermark)를 보장하기 위하여 DCT(Discrete Cosine Transformation) 도메인의 고주파 영역을 사용하였다. 여러 가지 실험을 통하여 에러가 보정된 원본 영상(original image)들과 워터마크된 이미지(watermarked image)들 사이에 유효한 블록들이 동일함을 확인하였다. 그리고 이러한 상호연관성이 추후의 퍼블릭 워터마킹을 위한 응용들에 적용될 수 있음을 입증하였다. In this paper, we propose a cross-correlation property and a related technique based on the validity of image block in a public watermarking and we embed messages into the high frequency band in the DCT domain because of its imperceptibility and fragility. As a result, we were able to inspect the identity of valid block between error corrected original images and watermarked images through experiments. And we confirmed the viability of this cross-correlation as an application for future public watermarking.
수밀격벽(水密隔壁)을 관통(貫通)하는 관(管)의 용접시공(熔接施工)으로 인(因)한 열응력해석(熱應力解析)(II) -Penetration piece에서의 열응력(熱應力)-
김효철,Hyo-Chul,Kim 대한조선학회 1975 大韓造船學會誌 Vol.12 No.1
As a second step of a thermal stress analysis in a watertight bulkhead plate during welding of a spool type penetration piece, is idealized as a thin circular disk with a clamped boundary. The exact solution for the transient temperature distribution and associated quasi-static thermal stresses which arise in a circular disk subjected to an instantaneous point source of heat acting in its interior has been obtained. And the solutions have been extended to the case of moving source of heat with the aid of the Duhamel's superposition integral and the results finally derived have been compared with the other results from the typical cases. The solutions can be applied to the problem such as a welding of a penetration piece on the watertight bulkhead and also applicable to the problems which occur in cutting or welding.
김효철,Kim, Hyo-Cheol 전국농업기술자협회 2010 농업기술회보 Vol.47 No.4
농업의 특성상 농업인은 작물의 생육조건에 따라 더운 날에도 하우스 등 밀폐된 공간에서 작업을 해야 하는 경우가 많다. 이로 인하여 농업인은 열사병, 열경련, 열허탈 등과 고열환경과 관련된 증상을 느낄 수 있으며, 이러한 증상들의 원인과 특징은 다음과 같다.
김효철,김재성,이재규,Kim, Hyo-Cheol,Kim, Jae-Seong,Lee, Jae-Gyu 선박안전기술공단 2000 선박안전 Vol.5 No.-
소형어선이나 일반적인 활주형선형은 부분적인 형상 수정을 거치게 되면 3차원 곡면으로 이루어진 선체의 외판을 2차원 평면상에 전개하여 표현할 수 있다는 특성을 가지고 있다. 이러한 점을 활용하여 전개도형에 따라서 제작된 얇은 FRP 판재를 선 요소들로 정의된 형틀 상에서 변형시켜 선체의 형상을 만들고 그 내부에 추가로 FRP를 적층 함으로서 선체를 완성하는 방법을 제안하고자 한다.
Ka 대역 고출력 고효율 도파관 공간 결합기 설계 및 제작
김효철,조흥래,이주흔,이덕재,안세환,이만희,주지한,김홍락,Kim, Hyo-Chul,Cho, Heung-Rae,Lee, Ju-Heun,Lee, Deok-Jae,An, Se-Hwan,Lee, Man-Hee,Joo, Ji-Han,Kim, Hong-Rak 한국인터넷방송통신학회 2021 한국인터넷방송통신학회 논문지 Vol.21 No.5
본 논문에서는 고출력 저손실의 도파관 공간결합 구조를 제안하였다. 제안하는 공간결합구조는 각 포트의 중심에서 원형 도파관을 통해 결합하는 방식으로 구현 하였다. 특히 도파관의 모드 중 전송 선로 손실이 가장 적은 TE01모드를 이용하여 저 손실을 구현하고, 새로운 모드 변환 방식을 적용하여 소형화를 이루었다. 또한 전계 분석을 통해 새로운 모드 변환 구조의 절연 파괴 전압을 계산하여 고출력에 적합함을 확인하였다. 최종 8-way 도파관 공간 결합기를 설계, 제작하여 삽입 손실은 0.4dB 이하 결합효율 97% 이상의 결과를 얻어 평면 결합 방식 대비 전기적 성능이 매우 우수함을 확인하였다. This report proposes a waveguide spatial combiner with high power low loss. The proposed spatial combiner implements high power by combining from the center of each port through a waveguide. In particular, we implement low loss using TE01 mode, which has the lowest transmission track loss among modes of circular waveguide, and miniaturization is achieved by applying a new mode conversion method. IIn addition, it was confirmed that it was suitable for high output by calculating the insulation breakdown voltage of the new mode conversion structure through E-field analysis. The final 8-way waveguide spatial combiner was designed and manufactured, and the insertion loss was less than 0.4dB and the combining efficiency was 97% or more, confirming that the electrical performance was very good compared to the planar combining method.
TM<sub>01</sub> 모드 변환을 이용한 Ka 대역 고출력 고효율 공간 결합기 설계 및 제작
김효철,조흥래,이주흔,이덕재,안세환,이만희,주지한,김홍락,Kim, Hyo-Chul,Cho, Heung-Rae,Lee, Ju-Heun,Lee, Deok-Jae,An, Se-Hwan,Lee, Man-Hee,Joo, Ji-Han,Kim, Hong-Rak 한국인터넷방송통신학회 2021 한국인터넷방송통신학회 논문지 Vol.21 No.6
본 논문에서는 비교적 구현이 쉽고, 최종 결합 포트의 전송 선로 길이를 짧게 구현할 수 있는 모드 변환기에 대해 제안하고, 8-way 공간 결합기에 적용하여 제작 및 시험을 하였다. 제안하는 모드 변환기는 그라운드와 연결되어 있는 Doorknob 형태의 원형 디스크에서 변환된 신호를 원형 도파관 내에서 개방을 시켜 TM<sub>01</sub> 모드로 변환이 이루어진다. 8-way 도파관 공간 결합기는 H-평면에서 입력된 8개의 신호를 중심의 원형 도파관에서 결합이 이루어지고, 최종 결합 모드는 TM<sub>01</sub>이 되도록 설계를 하였다. 시험 결과는 삽입손실 0.4dB 이하, 결합효율 95%이상의 우수한 성능을 확인하였다. 또한 전계 분석을 통해 새로운 모드 변환 구조의 절연 파괴 전압 및 방전 임계전력을 계산하여 고출력에 적합함을 확인하였다. 본 연구를 통해 확인된 결과는 향후 고출력 고효율 SSPA에 다방면으로 적용이 가능할 것으로 기대된다. In this study, it proposes a mode converter that is relatively easy to implement and can shorten the transmission line length of the final combining port and it was fabricated and tested by applying it to an 8-way spatial combiner. The proposed mode converter converts the signal converted from the doorknob-shaped circular disk connected to the ground into the TM<sub>01</sub> mode by opening it in the circular waveguide. The 8-way waveguide spatial combiner is designed and implemented so that 8 signals input from the H-plane are combined in a circular waveguide at the center, and the final combining mode is TM<sub>01</sub>. The test results confirmed excellent performance with an insertion loss of less than 0.4dB and a combining efficiency of 95% or more. In addition, it was confirmed that it is suitable for high output by calculating the breakdown voltage and discharge threshold power of the new mode conversion structure through electric field analysis. The results confirmed through this study are expected to be applicable to high-power, high-efficiency SSPA in various fields in the future.
김효철,조흥래,이주흔,이덕재,안세환,이만희,주지한,권준범,정해창,김소수,Kim, Hyo-Chul,Cho, Heung-Rae,Lee, Ju-Heun,Lee, Deok-Jae,An, Se-Hwan,Lee, Man-Hee,Joo, Ji-Han,Kwon, Jun-Beom,Jeong, Hae-Chang,Kim, So-Su 한국인터넷방송통신학회 2021 한국인터넷방송통신학회 논문지 Vol.21 No.3
초고주파 대역에서 TWTA(Traveling Wave Tube Amplifier)를 대체하기 위한 증폭기 연구가 활발히 이루어지고 있다. 반도체형 소자를 결합하여 높은 출력을 얻는 SSPA(Solid State Power Amplifier)의 경우 상대적으로 낮은 단일 소자의 출력으로 요구 출력을 충족하기 위해서는 저손실, 고효율의 결합 기술이 필요하다. 본 논문을 통해 8-way 도파관 결합기를 설계, 제작하여 20dB 이상의 반사 손실과 85% 이상의 결합 효율을 확인하였다. 전계 분석을 통해 결합기 내부의 임계 전력을 계산하여 안정적인 Power Rating을 확보하였고 전력 모니터링을 위한 커플러를 내장하여 소형화 및 경량화를 이루었다. The research of amplifier have been actively conducted to replace the Traveling Wave Tube Amplifier (TWTA) in the mmWave. For Solid State Power Amplifiers (SSPA), which combine semiconductor-type devices to obtain high output, Low-loss, high-efficiency combination techniques are required to meet the required output as the output of a single relatively low device is relatively low. In this paper, we design and produce an 8-way waveguide combiner and a reflective loss of more than 20dB and a binding efficiency of 85% or more were identified. Field analysis calculates the critical power inside the combiner. It secured stable Power Ratings and built-in coupler for power monitoring to achieve miniaturization and light weight.