http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김영복,김명,정치경,이원철,Kim, Young-Bok,Kim, Myung,Chung, Chee-Kyung,Lee, Won-Chul 대한예방의학회 2001 예방의학회지 Vol.34 No.3
Objectives : To examine the screening rate of cervical cancer in women and to find out the predictive factors for participation in cervical cancer screening programs within their life-time and within the last two years. Methods : The data was based on self-reported questionnaires from 1,613 women whose ages ranged from 26 to 60 years; this survey was peformed between December 1999 and January 2000. This study analyzed the predictive factors for participation in cervical cancer screening programs within their life-time and within the last two years. A logistic regression analysis was performed in order to derive the significant variables from the predisposing factors(demographic factor, health promotion behavior, reproductive factor), intervention factors(information channel, relation with medical stan, and proximal factors(attitude, social influence, self-efficacy). All analyses were peformed by the PC-SAS 6.12. Results : Our analyses showed that the screening rate for the women who received a cervical cancer screening(Pap smear) more than once within their life-time was 56.1% while those who had received one within the last two years was 34.5%. The significant factors for participation in cervical cancer screening program within their life-time were their income, married age, health promotion score, relation with medical staffs, social influence, and self-efficacy. On the other hand, age, number of pregnancies, menarche age, relation with medical staffs, social influences, and self-efficacy were significant factors for those being screened within the last two years. The predictive power of the logit model within their life-time was 68.8% and that within the last two years was 66.6%. Conclusion : The predictive factors for participation in cervical cancer screening program within their life-time are different from those for within the last two years. and that women's relations with medical staffs and social influences were the critical factors impacting on cervical cancer screening rates.
김영복,이승규,김성태,나우정,장홍희,Kim Y. B.,Lee S. K.,Kim S. T.,La W. J.,Chang H. H. 한국축산환경학회 2005 축산시설환경학회지 Vol.11 No.3
In this study, the thermal environmental factors in a layer f(arm such as dry bulb temperature, relative humidity, black globe temperature and illumination intensity were measured and analyzed to serve as basis for effective design and plan of poultry houses. The correlation analysis between the different factors was also done. Heat Index as measure of the thermal stress was also calculated and analyzed. A $1,000m^2$ laying house, 4 meters high with 52,000 layers in six-stage type cages was used in the measurement of the different environmental parameters. The results were as follows; 1. The temperature of the inside air and materials was directly related to the increase in aerial temperature based on the dry-bulb, black globe temperature reading. The correlation factor of the outside to inside air based on dry bulb setting was very significant at 0.927 The dry bulb temperature for inside temperature ranged from $19.9\~28.8^{\circ}C\;with\;SD+2.2^{\circ}C$ while that of the outside air was $16.2\~33.1^{\circ}C,\;SD+3.5^{\circ}C$. In addition, the temperature of the inside air was very stable. 2. The black globe temperature of the inside air ranged from $20.1\~28.8^{\circ}C,\;SD+2.3^{\circ}C$ while that of the outside air was $16.2\~47.5^{\circ}C,\;SD+6.0^{\circ}C$. 3. The relative humidity of the outside and inside air was $72.4\~100\;and\;50.2\~85.6\%$ with an average of $89.2\;and\;71.7\%$, respectively. 4. The illumination intensity in the laying house was less than 7 lux, with an average of $1.2\~2.5lux$ relative to height indicating that the laying house was well isolated from outside radiation. 5. The heat index of the inside air of the laying house had a high variation from $20.5^{\circ}C,\;SD+2.5^{\circ}C$ while that of the outside air was $13.1\~45.5^{\circ}C$, with an average of $21.6^{\circ}C,\;SD+6.3^{\circ}C$.
김영복,손재길,이승규,김성태,이양근,Kim Y. B.,Son J. G.,Lee S. K.,Kim S. T.,Lee Y. K. 한국축산환경학회 2004 축산시설환경학회지 Vol.10 No.3
자연에너지인 태양열을 동력원으로 하여 구동되는 물펌프는 물이 많이 필요한 여름철에 과 열원인 태양에너지가 강하므로 매우 이상적인 장치라 할 수 있다. 본 연구에서는 태양열 물펌프의 자동화운전을 실현하고자 작동물질의 압력변화를 감지하여 자동 운전되도록 하였으며, 이에 필요한 제어논리를 개발하고 회로론 구성하였다. 실험에서는 장치를 제작. 실험, 분석하였고 분석항목은 양수량과 효율, 압력, 온도를 분석하였다. 또한 자동화에 필수적인 응축기 진공을 위한 응축기의 최소 전열면적을 설계하였으며, 그 결과를 정리하면 다음과 같다. 1. 복사에너지를 동력으로 변환하여 물을 양수할 수 있었고, 자동화 제어회로에 의해 사이클을 반복할 수 있었다. 2 양수는 60분 동안에 13사이클을 수행하였으며, 사이클 당 소요시간은 약 4.9분이었다. 총 양수량은 69,200cc, 사이클 당 평균 5,320cc를 양수하였다. 이 과정동안 장치의 열효율은 $0.030\%$로 나타났다. 3. 실험과정에서 기액 분리탱크 내의 작동물질 증기의 온도는 물탱크로 증기를 배출하기 전후에 따라 약 $41\~49^{\circ}C$ 범위에 있었으며, 상당히 균일하게 변동하고 있었다. 물탱크와 공기탱크내의 온도는 약 $30^{\circ}C$ 정도 부근에서 유지되고 있었으며, 응축기 냉각수공급온도는 실험기간 중 $10\~13^{\circ}C$ 범위를 나타내었다. 응축기 출구온도는 $14\~17^{\circ}C$ 정도로서 응축기 냉각수의 입출구 온도차는 실험초기를 제외하면 약 $4^{\circ}C$ 전후로 나타났다 4. 기액 분리탱크 내의 압력은 자동화 프로그램 된 범위인 150$\~$450hPa(gauge)를 매우 정확하게 유지하였으며, 공기탱크내의 압력은 약 1200hPa로 나타났다. 응축기내의 압력은 약 600hPa로서 진공을 잘 유지함으로서 사이클을 반복하는데 문제가 없었다. 5. 한국의 전국 하루 평균 3.488kWh/($m^2{\cdot}day$)의 태양에너지를 기준으로 장치의 열효율이 $0.1\%$를 적용하고 전 양정을 10m로 보면 태양열복사 단위면적 $m^2$ 당 약 128kg의 물을 양수할 수 있을 것으로 예상된다. The solar powered water pump is very ideal equipment because solar power is more intensive when the water is more needed in summer and it is very helpful in the rural area, in which the electrical power is not available. The average so]ar radiation energy is 3.488 kWh/($m^2{\cdot}day$) in Korea. In this study, the automatic control logic and system of the water pump driven by the radiation energy were studied, designed, assembled, tested and analyzed for realizing the solar powered water pump. The experimental system was operated automatically and the cycle was continued. The average quantity of the water pumped per cycle was about 5,320 cc. The cycle time was about 4.9 minutes. The thermal efficiency of the system was about $0.030\%$. The pressure level of the n-pentane vapour in flash tank was 150$\%$450 hPa(gauge) which was set by the computer program for the control of the vapour supply. The pressure in the condenser and air tank during cycles was maintained as about 600 hPa and 1,200 hPa respectively. The water could be pumped by the amount of 128kg/($m^2{\cdot}day$) with the efficiency of $0.1\%$ and the pumping head of 10 m for the average solar energy in Korea.
선박안정성 향상을 위한 횡동요 방지 장치 개발에 관한 연구
김영복,이권순,김준효,채규훈,Kim, Young-Bok,Lee, Kwon-Soon,Kim, Jun-Hyo,Chae, Gyu-Hoon 해양환경안전학회 2005 해양환경안전학회지 Vol.11 No.1
선박 횡동요는 물적 손실을 초래할 뿐만 아니라, 승선자의 거주성, 안전성 및 작업능률을 저하시키는 가장 큰 요인이 된다. 횡동요억제를 위한 많은 연구는 다양한 형태의 장치개발이라는 결과를 가져왔으며 상당한 효과를 얻고 있다. 지금까지 개발 된 대부분의 장치는 그 성능을 고려하지 야더라도 특수한 목적의 선박을 대상으로 설치$\cdot$운영되고 있으며, 고가이고 복잡하여 설치 상에도 많은 문제점을 안고 있다. 따라서 본 논문에서는 선박의 선미측에 설치한 플랩을 이용하여 운항중인 선박의 횡동요 억제에 관해 고찰하고 있다. 본 장치는 중$\cdot$소형의 선박에도 쉽게 설치하여 운용이 용이할 뿐만 아니라, 적절한 제어시스템 구축으로 피칭운동도 제어할 수 있는 장점이 있다. 본 논문에서는 이러한 장치를 설치한 선박에 대해 실험적 기법을 이용하여 모델링을 행하고 시뮬레이션을 통해 장치의 횡동요 억제효과를 검증하고 있다. We have investigated the usefulness cf active stabilizing system to reduce ship rolling under disturbances, using varying reaction cf the flaps. In the proposed anti-rolling system for a ship, the flaps as the actuator are installed on the stem to reject rolling motion induced by disturbances like wave. The action induced by flaps which depends on power of disturbances am take the ship balance. Especially, in this study we identify the controlled system under the undefined system structure using spectral analysis and experimental studies. Based on these informations, we design the controller to evaluate the usefulness of the proposed system.
김영복(Young Bok Kim),이의삼(Wee Sam Lee),한승헌(Seung Heon Han),이동길(Dong Kil Lee),이준기(June Key Lee) 한국생산제조학회 2021 한국생산제조학회지 Vol.30 No.3
Machining experiments were conducted to improve the surface morphology of a microlens array using the raster milling method. Three types of raster milling methods were investigated in this study: parallel, tilted, and single-point raster milling. Further, the characteristics of the machined surfaces were analyzed. In parallel raster milling, hump formation on the machined surface was promoted by the tool’s run-out deviation. In tilted raster milling, tool marks occurred on the machined surfaces owing to tool wear. In single-point raster milling, wherein the tool axis rotated according to the lens curvature during machining, the form accuracy of peak-to-valley was confirmed to improve from 0.46 to 0.07 μm. Therefore, single-point raster milling was validated as a highly robust machining method because the surface morphology was rarely affected by tool errors.