http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
AE 기술을 이용한 미세 홈 가공의 모니터링에 관한 연구
김남훈,이은상,이득우,김남경,곽철훈,Kim, Nam-Hun,Lee, Eun-Sang,Lee, Deug-Woo,Kim, Nam-Kyung,Kwak, Choi-Hun 한국기계가공학회 2003 한국기계가공학회지 Vol.2 No.3
This paper describes evaluation and monitoring methods of machining characteristics for developed micro grooving machine. Experiments were conducted under various process conditions such as spindle revolution speed, feed rates and depth of groove V and U shape of blade and STD11 were used in this experiment. The status of grooving was evaluated through analysis of the Acoustic emission (AE) signal resulted in each process condition. Based on the analysis, this paper examined the possibility of monitoring adapting fuzzy logic. In conclusion, this paper presented the possibility of monitoring in process adapting AE technology and appropriate micro grooving condition.
김남훈,양정열,문재원,김규보,천지선,Kim, Nam-Hun,Yang, Jeong-Yeol,Moon, Jae-Won,Kim, Gyu-Bo,Cheon, Ji-Seon 대한성형외과학회 2010 Archives of Plastic Surgery Vol.37 No.4
Purpose: Blepharoptosis can result from either congenital or acquired causes. Blow out fracture or facial bone fracture including blow out fracture can be one of the causes. Authors experienced 3 cases of severe blepharoptosis after blow out fracture treated only with observation after reduction of associated fracture. Methods: Reconstruction of orbital wall was conducted on all cases diagnosed as blow out fracture using 3 dimensional computed tomography, and conservative treatment was done on accompanying severe blepharoptosis. Results: At the time of injury, all cases showed severe blepharoptosis requiring frontalis muscle transfer for correction. But blepharoptosis was recovered in an average of 18 weeks without any surgical procedure except reconstruction of orbital wall. Conclusion: Once Blepharoptosis occurred after blow out fracture, thorough evaluation must be done at first. If definitive cause of blepahroptisis cannot be found as authors' cases, injury of oculomotor nerve may result in blepharoptosis. So, as for blepharoptosis after blow out fracture, conservative treatment following reconstruction of fractured orbital wall can be one of good management.
국산 참나무屬 數種의 위스키 원액 저장용 목통으로의 활용성 평가
김남훈(Nam-Hun Kim),황원중(Won-Joong Hwang),최인화(In-Hwa Choi) 한국산림바이오에너지학회 2002 산림바이오에너지 Vol.21 No.2
위스키 숙성용 木桶으로서 한국산 참나무속 목재의 이용 가능성을 검토하기 위하여 도관직경, 방사조직 밀도, 방사조직 높이, 타일로시스의 존재 유?무 등 해부학적 특성과 알콜 침지 중의 밀도, 색농도 변화 및 흡수량을 조사하였다. 본 실험에 사용된 참나무속 목재는 모두 환공재였고, 단열방사조직과 광방사조직으로 구성된 복합방사조직을 가지고 있었으며, 방사유세포는 대부분이 평복세포였다. 타일로시스는 루부라참나무를 제외한 공시재 모두에서 존재하였다. 목재 밀도는 알콜 침적 후 많이 감소하였다. 알콜 색 농도는 떡갈나무와 갈참나무가 다른 수종보다 더 짙은 황갈색을 나타냈다. 흡수량은 변재가 심재보다 높았고, 특히 red oak가 white oak보다 더 크게 나타났다. 결론적으로 국산 참나무속 수종은 위스키 숙성용 木桶으로 사용될 수 있을 것으로 판단되었다.<br/> This paper describes experimental results on the utilization of some Korean oak woods for whisky aging barrel.<br/> Some anatomical characteristics as vessel diameter, ray spacing, ray height, existence of tyloses, water absorption and color change of alcohol during immersing of wood samples were examined. The oak woods used in this study were ring-porous. The type of ray was a compound ray consisted of uniseriate ray and broad ray. The ray parenchyma cells were almost procumbent, tyloses were presented in white oak(Quercus aliena, Quercus variabilis, Quercus dentata, Quercus mongolica), but absented in red oak(Quercus rubura). Density of wood samples decreased during immersing in alcohol.<br/> Alcohol color in Quercus dentata and Quercus aliena presented more darker than other samples. Water absorption of sapwoods was higher than that of heartwoods. Especially, red oak showed more higher water absorption than white oak. Consequently, Korean white oak woods can be used as the whisky aging barrel. <br/>
선행각을 이용한 팬용 플럭스 스위칭 전동기 드라이브에 대한 연구
김남훈(Nam-Hun Kim),구본삼(Bon-Sam Koo) 한국조명·전기설비학회 2009 조명·전기설비학회논문지 Vol.23 No.6
최근에는 파워툴(power tools)과 가전 제품에 있어서 전자적인 전류(commutation)를 사용하는 새로운 형태의 브러시리스 전동기인 플럭스 스위칭 전동기(Flux switching motor)에 대한 관심이 점차적으로 증가되고 있으며, 특히 팬과 펌프 시장에 있어서는 그린 정책으로 인하여 플럭스 스위칭 전동기에 대한 관심이 급격히 증가되고 있다. 플럭스 스위칭 전동기는 유도전동기에 비해서는 높은 전력 밀도(power density)와 상대적으로 높은 효율, 그리고 브러시리스 DC 전동기에 비해서는 간단한 전동기 구조와 가격 경쟁력이라는 장점을 가지고 있다. 따라서 본 논문에서는 팬 용도로 제작된 12/6 폴을 가지는 플럭스 스위칭 전동기의 드라이브 설계와 동작원리에 대해서 나타내고, 팬 용도로 제작된 프로토타입 플럭스 스위칭 전동기의 타당성을 검증하기 위해서 TMS320F2812 DSP와 일반적인 인버터를 이용한 실험 결과를 제시한다. A new class of electronically commutated brushless motor, the flux-switching motor(FSM) is gradually emerging in power tools and household appliances especially fan and pump application because of green policy. This motor offers advantages of high-power density and relatively high efficiency compare with induction motor, low cost and simple motor structure compare with bldc motor. This paper presents the principle of the FSM and design of the 12/6 pole FSM drive system for fan application. Finally, test results of the prototype motor are provided to verify a validity of the fan application with TMS320F2812 DSP and inverter.
연구 보고서의 공기관계 정보에 제목 및 요약의 가중치를 적용한 유사도 계산
김남훈 ( Nam-hun Kim ),주종민 ( Jong-min Joo ),박혁로 ( Hyuk-ro Park ),양형정 ( Hyung-jeong Yang ) 한국컴퓨터교육학회 2017 한국컴퓨터교육학회 학술발표대회논문집 Vol.21 No.2
본 논문에서는 국가 연구 보고서의 공기 관계 정보와 제목, 요약 등에 가중치를 적용한 유사도 계산 방법을 제안한다. 이를 위해 국가 연구개발 보고서에서 텍스트를 추출하여 한 문장 단위로 문서를 분할 하고, 기본 불용어와 보고서에서 특징적으로 나타나는 불용어를 처리하고 형태소 분석을 한 뒤 공기관계를 추출하였다. 또한 문서의 유사도 계산시 정확성을 높이기 위해 제목과 요약 부분에 가중치를 부여 하였다. 이를 통해 본 논문에서 제안하는 방법이 문서 검색 라이브러인 루씬(Lucene)을 이용한 방법보다 2.5%의 검색성능 향상을 그리고 Knn-휴리스틱 방법보다는 1.1%의 검색성능 향상을 보였다. 이러한 결과를 통해 문서의 요약과 제목 그리고 공기관계 정보가 연구보고서의 유사도를 계산 하는데 영향을 미친다는 것을 보였다.
image Color Appearance Model을 기반으로 한 HDR Tone Mapping 시스템 설계
김남훈(Nam-Hun Kim),오상협(Sang-Hyub Oh),이동호(Dong-Ho Lee) 대한전기학회 2009 정보 및 제어 심포지엄 논문집 Vol.2009 No.10
일반적으로 HDR(High Dynamic Range) 영상을 제한적인 다이내믹 레인지를 가진 CRT나 LCD같은 디스플레이 장치에 표현하기 위해서는 톤 매핑(tone mapping)이란 방법을 통해야 한다. 톤 매핑의 대부분은 Photos hop CS3, Photomatix와 같은 컴퓨터 소프트웨어를 사용한다. 본 논문에서는 정지 영상분야에서 사용될 수 있는 하나의 톤 매핑 모델 중 하나인 iCAM((image Color Appearance Model)을 기반으로 한 HDR Tone Mapping 시스템 설계를 하드웨어 언어(HDL)중 하나인 verilog를 이용하여 구현하는 방법을 제안한다. 제안한 verilog로 구현하는 방법은 소프트웨어 방법보다 시간을 줄일 수 있으며, 차후 칩으로 만들어질 경우 공간 또한 줄일 수 있다. 시뮬레이션 프로그램으로 ModelSim 6.3f, MATLAB R2009a를 사용하였으며, ALTERA사의 IP(Intellectual Property)를 이용하여 verilog code로 구현된 시뮬레이션 결과와 MATLAB code로 구현된 시뮬레이션 결과의 오차에 큰 차이가 없음을 확인하였다.