http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
高濃度有機排水の高溫 · 好氣處理における 力口り一/水 (C/W) 比の重要性
梁在璟,淸水由紀子,趙敬淑,森忠洋 이화여자대학교 생명과학연구소 1995 생명과학연구논문집 Vol.6 No.-
The significance of Calorie/Water (C/W) ratio was investigated in the treatment of highly concentrated orgnic wastes by the Thermophilic Oxic Process (TOP). Shochu progressing wastewater was used in this study. When C/W ratio was 2.18, most of carbon in influent was converted to CO_2 and all water was evaporated. Organic matter was not completely converted to carbon dioxide (CO_2) when the C/W ratio was less than 1.85. It is because that the biologicak activity was low due to the increase of moisture. The mixture in the reator was dried when C/W ratio was 4.13 beacuse excess energy was provied. Considering these results, it si concluded that the optimum C.W ratio is 2.18. The thermophilic oxic process is included in the high energy combustion, in other word this process was defined as "Biocombustion".
실증연구를 위한 주택용 태양열 온수기 모니터링 시스템 개발
양동조,김재열,한재호,송경석,김우진 한국공작기계학회 2004 한국공작기계학회 추계학술대회논문집 Vol.2004 No.-
The application of solar energy, in the field of alternative energy, was on the increase tendency. In the case of advanced nations, through continuous R&D, solar hot water heater with high efficiency has been used for the house and the industrial process on business, advanced nations were reached up the experimental stage of solar generation system. But, the actual circumstance of the domestic has been not accomplished the popularization of solar hot water heater and the settlement of it which is the fundamental stage of the solar energy usage. This trouble, the domestic was flooded with small enterprise for producing solar hot water heater, was caused by the popularization and the production without verification of performance. To supply the monitoring program for evaluating solar hot water heater, this research was purpose to improve the technical development of the enterprise for producing solar-heat hot-water-boiler and served as an aid for the enlargement and the popularization on solar energy.
3차원 레이저 진동측정기를 이용한 고속회전 모터의 진동특성 분석
김재열,김창현,송경석,양동조,곽이구,이창선 한국공작기계학회 2003 한국공작기계학회 춘계학술대회논문집 Vol.2003 No.-
Noise cause is dividing to fluid noise by exhaust flow of fan and vibration noise by rotational vibration of motor. Until now, measuring method has been used to measure vibration by the accelerometer, this method has been not measured for the vibration in some parts of brush and commutator because of motor construction. This research was purposed on the accurate analysis, using laser vibration analyzer, of noise cause against the difficult part in old times. By using this measured data, we would like to use for the design of silent motor.
송경환,양재성 順天大學校 1997 論文集 人文社會科學篇 Vol.16 No.-
ABSTRACT The main focus this study is the countermeasure of after agricultural work disaster. In this study, The countermeasure of after agricultural work disaster is to present the extension of industrial disaster insurance Many factory works accept the benefit of social insurance, industrial insurance, medical care insurace, national pension, employment insurance etc. But Agricultural business works accept only medical care insurance and national pension, in spite of lower income then their. Actually, Agricultural work disaster is to happen work course considerably. In order to solve such problem, the govenment must extend social insurance to agricultural work disaster.
초음파 조사에 의한 트리암시놀론 아세토니드 겔의 피부투과
송경숙,김영일,양재헌 한국약제학회 2002 Journal of Pharmaceutical Investigation Vol.32 No.2
This study is to enhance drug penetration via skin and investigate anti-inflammation effect following adoption of ultrasound. For this goal gel containing triamcinolone was prepared and the skin penetration rate and the change effects of blood plasma ingredients and serum enzyme were investigated. Using Franz type diffusion cell and the skin of hairless mouse, the permeation enhancing effect of ultrasound was tested. After the injury by direct trauma, the blood test was performed by measuring WBC, lymphocyte, and neutrophyl, and by analyzing CPK and LDH. The ultrasound transducer whose technical specification is geometric area(GA) 1.4㎠, effective radiation area(ERA) 0.8㎠, and beam non-uniformity ratio(BNR) 6.0 max was used. The influence of frequency having an effect on skin permeation rate was higher in the case of using 1MHz and continuous treatment. The temperature of receptor phase was not influenced in skin permeation by phonophoresis. Skin permeation increase attended by intensity of ultrasound, the permeation of triamcinolone was accelerated at 2.5 w/㎠ than 1.0 w/㎠. Following muscle injury phonophoretic group the number of WBC, neutrophil and lympholyte were decreased significantly as compared with both control group and ultrasound group. The result of variation of serum CPK and LDH activity conformed to the phonophoretic effect as same pattern with the variation of WBC, neutrophil and lymphocyte.
용접결함의 형상인식을 위한 분류기 알고리즘의 성능 비교
김재열,김영석,김창현,양동조,이창선,송경석 한국비파괴검사학회 2003 학술대회 논문집 Vol.- No.1
In this study, we compared backpropagation network(BPNN) with probabilistic neural network(PNN) as the classification algorithm of welding flaws. For this purpose variables are appied the same to two algorithm. Here, feature variable is composed of time signal itself and frequency signal itself. Those are ultrasonic signals reflected on welding flaws. Through this process, we comfirmed advantages/disadvantages of two algorithms, identified application methods of two algorithms to classification methods of welding flaws. These advantages/disadvantages and application methods are based on theoretical backgrounds.
김재열,유신,김창현,송경석,양동조,김유홍 한국공작기계학회 2004 한국공작기계학회 추계학술대회논문집 Vol.2004 No.-
In this study, we made a comparative study of backpropagation neural network and probabilistic neural network and bayesian classifier and perceptron as shape recognition algorithm of welding flaws. For this purpose, variables are applied the same to four algorithms. Here, feature variable is composed of time domain signal itself and frequency domain signal itself. Through this process, we comfirmed advantages/disadvantages of four algorithms and identified application methods of four algorithms.
김재열,마상동,오성민,송경석,김양중,김창현,곽이구 朝鮮大學校 機械技術硏究所 1999 機械技術硏究 Vol.2 No.2
In this study, the researches classifying the natural flaws in welding parts are performed using the signal pattern classification method. For this purpose 500MHz storage digital oscilloscope including FFT function and enveloped waveform generator are used and the signal pattern recognition procedure is made up the digital signal processing, feature extraction, feature selection and classifier design. Specially it is composed with and discussed using the distance classifier is based in euclidean distance the empirical Bayesian classifier. In feature extracting, it is performed using the class-mean scatter criteria. And the signal Pattern classification method is applied to the signal pattern recognition problems of natural flaw that is porosity inclusion, slag inclusion, lack of penetration, lack of fusion. center crack, side crack, toe crack. root crack as the planar and volumetric flaw classification problem. According to this results, if appropriately learned the neural network classifier is better acquire the recognition rate of 86.31% above through it is different a little according to domain extracting the feature and the classifier