RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 음성지원유무
        • 학위유형
        • 주제분류
          펼치기
        • 수여기관
          펼치기
        • 발행연도
          펼치기
        • 작성언어
        • 지도교수
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 영업사원의 조직 및 고객 적응성의 선행변수와 결과변수에 관한 연구

        김재홍 서울시립대학교 2015 국내박사

        RANK : 247647

        국문초록 영업사원들의 적응력은 그들의 영업성과를 결정하는 가장 주요한 변수 중의 하나로 간주되어 왔다. 이 연구에서는 기존 연구를 확장하여 영업사원의 적응력을 고객에 대한 적응성뿐만 아니라 조직에 대한 적응력을 구분하여 이들이 영업사원의 성과변수에 미치는 영향이 어떠한가를 파악하고자 하는 것을 목적으로 하였다. 또한 이 연구에서는 영업사원들의 고객 및 기업에 대한 적응성에 영향을 미치는 선행변수를 규명하고자 하는 것을 목적으로 하였다. 이러한 연구목적을 위해 B2B와 B2C를 망라한 6개 분야의 산업에서 실제 영업활동을 수행하는 영업사원 325명으로부터 자료를 수집하여 실증분석을 실시하였다. 연구결과 영업사원의 적응성은 조직에 대한 적응성과 고객에 대한 적응성으로 구별됨을 알 수 있었다. 또한 영업사원의 조직 및 고객에 적응성은 친조직행동에 긍정적인 영향을 미치고, 이어서 친조직행동이 이직의도를 낮추고 영업성과를 높이는 역할을 담당하고 있음을 확인하였다. 영업사원의 조직 및 고객 적응성의 선행변수로는 조직 관련 요인(과정통제와 성과통제)과 개인 관련 요인(성과지향성과 학습지향성)을 제시하였다. 분석 결과 영업사원의 조직 및 고객 적응성에는 과정통제와 학습지향성이 주요한 선행변수가 됨을 파악할 수 있었다. 하지만 성과통제는 영업사원의 고객 및 조직 적응성에 영향을 미치지 않는 것으로 나타났다. 성과지향성의 경우에 조직적응성에는 유의한 영향을 미치지 못하는 것으로 나타났지만, 고객 적응성에는 부정적인 영향을 미치지는 것으로 밝혀졌다. 주요어 : 조직적응성, 고객적응성, 영업성과, 이직의도, 친조직행동, 성과통제, 과정통제, 성과지향성, 학습지향성 Abstract The adaptiveness of salesperson has been considered as one of the most important antecedents to sales performance. This purpose of this thesis is to extend prior researches on the effect of the adaptiveness of the salesperson by including not only adaptiveness to the customer but also adaptiveness to the organization in the reseach model as a new variable. Another research purpose was figuring out antecedent variables to salesperson’s adaptiveness to customer and the organization. For the purposes of this study, the author collected and used a survey research data from the sample of 325 B2B and B2C salespersons covering 6 industries. Research results revealed the adaptiveness of salesperson has 2 sub-constructs: adaptiveness to customer and adaptiveness to organization. The adaptiveness to customer and organization has positine effects on the organization citizen behavior(OCB) and OCB to a lower turnover intention and a better sales performance in turn. The antecedents to the salesperson’s adaptiveness to customer and organization were grouped as organization factors such as outcome control and process control and salesperson’s characteristics factors like performance orientation and learning orientation. Research results showed salesperson’s adaptiveness to customer and organization are influenced by process control and learning orientation. Outcome control was found to has no inflence on salesperson’s adaptiveness to customer and organization. Outcome control was found to has no significant effects on the adaptiveness to organization but has a significant negative effects. Key Words : Adaptiveness to Organization, Adaptiveness to Customer, Sales Performance, Turnover Intention, Organization Citizen Behavior, Outcome Control, Process Control, Performance Orientation, Learning Orientation

      • 개방형 혁신여건이 정부 R&D투자의 성과에 미치는 영향 : OECD 국가 간 비교연구

        김재홍 한양대학교 대학원 2010 국내박사

        RANK : 247647

        본 연구는 기술정책에 있어서 가장 기본적인 질문 중에 하나인 “한정된 재원으로 어떻게 하면 정부 R&D투자의 성과를 높일 수 있을까?” 하는 질문을 가지고 출발하고 있다. 물론 이러한 연구 질문에 답을 하기 위해서는 먼저 또 다른 두 개의 질문에 대해 답을 해야 한다. 하나는 “정부 R&D투자의 성과를 어떻게 측정할 수 있을까?” 하는 문제이고, 다른 하나는 “과연 어떤 요인들이 정부 R&D투자의 성과에 어떻게 영향을 주고 있을까?” 하는 문제이다. 정부 R&D투자의 성과를 높일 수 있는 방안에 대해 종전의 연구들은 대부분 R&D 단계별로 접근을 해왔다. 그러나 이러한 접근방법은 R&D투자의 관리적인 측면만을 강조하는 것으로, 투자 구조나 환경적인 측면을 고려하지 못하기 때문에 부분적이고 개별적인 접근이 될 수밖에 없다. 더구나 최근 들어 정부 R&D투자가 지속적으로 확대되고 있는 상황이기 때문에 정부 R&D투자의 방향과 투자효율성 개선을 위한 새로운 R&D 패러다임이 요구되고 있다. ‘개방형 혁신이론’은 외부자원의 적절한 활용과 내부 지식자원의 수익화를 통해 R&D투자의 비용과 시간을 최소화하면서, 투자효과를 높일 수 있다는 점 때문에 주목을 받고 있다. 또한, 이 이론은 정부 R&D투자에 있어서 일어날 수 있는 정부실패의 가능성을 줄여줄 수 있다는 점에서도 주목할 필요가 있다. 이러한 개방형 혁신이론은 R&D단계에 대한 관심보다는 그 과정에서 나타나는 행태(behaviour)와 그 행태가 일어날 수 있는 환경, 즉 여건(conditions)에 더 많은 관심을 갖고 있다. 이 이론이 관심을 갖고 있는 지식, 인력, 자금, 제도 등에 관한 혁신여건은 민간 기업뿐만 아니라 정부의 R&D투자에 있어서도 환경적 요인으로 작용하며, R&D 역량과 직접적인 관계가 있다. 따라서 본 논문에서는 R&D 단계별 접근보다는 R&D 역량에 초점을 두고 개방형 혁신이론에서 말하는 혁신여건이 정부 R&D투자의 성과에 어떻게 영향을 미치고 있는지를 분석해 봄으로써 정부 R&D투자의 성과를 높이기 위해서는 무엇을 어떻게 해야 하는지에 대한 해답을 찾아보고자 하는 것이다. R&D투자의 성과에 관한 기존의 선행연구들은 주로 국가 총 R&D 또는 개별 R&D사업 자체의 성과 측면을 다루고 있으며, 국가 총 R&D 중에서 민간 R&D를 제외한 정부 R&D만의 성과를 다루고 있는 연구는 거의 없다. 정부 R&D투자를 대상으로 한 연구도 주로 사업단위에서 이루어지고 있어 전반적인 정부 R&D투자의 성과에 대한 연구는 제한적인 수준에서 이루어지고 있다. 또한, R&D투자의 성과에 관한 국가 간 비교연구를 다루고 있는 선행연구들도 투입변수 측면에서 대부분 연구비․연구인력 등 제한적인 변수만을 사용하고 기술혁신 활동에 영향을 줄 수 있는 다양한 변수를 고려하지 못하고 있다. 즉, 기존의 선행연구들은 국가 총 R&D투자의 성과에 중점을 두고 영향요인을 파악함에 따라, 정부의 직접적인 정책 노력이 반영된 정부 R&D투자의 성과와 정책지원이 필요한 영향요인에 관한 연구로 이어지지 못했다는 것이다. 한편, 개방형 혁신여건의 내용에 대해서는 학자들 간에 다소 차이가 있으나, 대부분의 학자들은 기초지식의 축적, 인적 자원의 유동성, 금융서비스 접근수준, 경쟁 환경, 지식재산권 환경 등을 중요한 요소로 보고 있다. 개방형 혁신이론에서 강조하는 이러한 혁신여건은 바로 정부 R&D투자에 대한 환경적 요인에 해당된다고 볼 수 있다. 따라서 정부 R&D투자의 성과를 높이기 위해서는 이러한 환경적 요인이 정부 R&D투자의 성과에 어떻게 영향을 미치고 있는지를 분석할 필요가 있다. 본 논문에서는 개방형 혁신여건이 정부 R&D투자의 성과에 미치는 영향을 분석하고 그에 대한 정책적 함의를 도출하기 위해 2단계에 걸쳐 실증분석을 수행하였다. 먼저 24개 OECD 국가에 대해 정부 R&D투자의 성과계수를 측정하고, 상대적인 수준을 비교해 보았다. 그리고 그 다음 단계로 16개 OECD 국가에 대해 개방형 혁신여건 수준이 어느 정도인지를 평가하고, 이러한 각 국가별 혁신여건이 정부 R&D투자의 성과 차이에 어떻게 영향을 주고 있는지를 분석하였다.

      • 유동성의 공급이 시장의 질적 수준과 자본구조에 미치는 영향

        김재홍 서울시립대학교 일반대학원 2015 국내석사

        RANK : 247647

        This study is the Korea Exchange (hereinafter, "KRX") is being conducted as a liquidity provider system (hereinafter, "LP Islands") in the look and analyzed from the microscopic point of view of the reaction of the capital market through this market. In addition, the impact on the capital structure of the company is analyzed through this internal corporate financial perspective. In terms sum up the results of the first analysis, the effect on the qualitative level of the securities market was incomplete. 8 colors only trading frequency variable visibility of the indicators of institutional and foreign investors were significant at the 1% level. The value of the amount of institutional trading frequency, the frequency of foreign trade takes a value of negative itgetda be seen as mutually contradictory interpreted aspects to deal halve the effect of the LP system. Anand, Tanggaard, and Weaver (2009) has improved, but said that the presence of LP was sikindago improve the quality of the market price of the securities in particular raising the quality level of the market of South Korea's market was not statistically significant. And Kedia and Panchapagesan (2011) have incorporated the methodology of cross-sectional regression analysis for methods of financing schemes, the company introduced the LP model (1) 10% showed the value of a significant amount at the level control model, the model (2) it turned out not statistically significant. Effects of this extended concept of leverage also was not statistically significant. Second, the effect on the quality of the Kosdaq market levels were higher than in the case of the securities market. Rate spreads and spreads, institutional investors held a significance in the trading frequency. This means that spread and spread rate decreased significantly is that the effect on liquidity increased by reducing the transaction costs of investors. Although this connection has a positive sign, foreign investors trading frequency did not appear significant fact is also unknown. In the cross-sectional regression analysis on the method of financing the regression analysis did not appear significant leverage on the value of the results it suggests that the introduction of the LP system is to increase the leverage. Being a leverage increases, the financial activities of the company hwalbalhaejyeo, itgetda can be interpreted as a reason to raise new funds. 본 연구는 한국 거래소에서 시행 중인 유동성공급자제도를 살펴보고, 이를 통하여 자본시장의 반응을 시장의 미시적 관점에서 분석한다. 또한 이를 통하여 기업 내부의 자본구조에 미치는 영향을 기업재무 관점에서 분석한다. 분석의 결과를 정리해 보자면 먼저, 유가증권시장의 질적인 수준에 대한 효과는 미비했다. 총 8가지의 지표 중 가시성 변수인 기관 및 외국 투자자의 거래 빈도만이 1%수준에서 유의했다. 기관의 거래 빈도는 양의 값을, 외국의 거래빈도는 음의 값을 가지는데 서로 상반된 거래양상이 LP제도의 효과를 반감시키는 것으로 해석해 볼 수 있겠다. Anand, Tanggaard, and Weaver(2009)은 LP의 존재가 시장의 질적 수준을 향상시킨다고 하였고 특히 주가를 상승시킨다고 밝혔으나 한국의 유가증권시장에서는 시장의 질적 수준의 향상이 통계적으로 유의하지 않았다. 그리고 Kedia and Panchapagesan(2011)의 방법론을 원용한, LP제도를 도입한 기업의 자본조달 방법에 대한 횡단면 회귀분석 결과에서는 모델 (1)에서 10% 수준에서 유의하게 양의 값을 보였지만 통제모델인 모델 (2)에서는 통계적으로 유의하지 않게 나왔다. 이를 확장한 개념인 레버리지에 미치는 영향 또한 통계적으로 유의하지는 않았다. 둘째, 코스닥시장의 질적인 수준에 대한 효과는 유가증권시장의 경우보다 높았다. 스프레드와 스프레드율, 기관 투자자 거래 빈도에서 유의성을 가졌다. 스프레드와 스프레드율이 유의하게 감소했다는 의미는 투자자의 거래비용을 감소시켜 유동성 증가에 효과가 있다는 것이다. 이와 연결되어 비록 외국인 투자자 거래 빈도는 유의하게 나오지 않았지만 양의 부호를 가진다는 사실 또한 알 수 있다. 자본조달의 방법에 대한 횡단면 회귀분석에서는 유의한 결과값이 나오지 않았지만 레버리지에 관한 회귀분석에서는 LP제도의 도입이 레버리지를 증가시키는 것으로 나왔다. 레버리지가 증가된다는 것은 기업의 재무적 활동이 활발해져, 신규자금을 조달하기 위한 이유라고 해석할 수 있겠다.

      • 강우시 불포화 풍화토의 습윤에 의한 무한사면 안정해석

        김재홍 연세대학교 대학원 2002 국내석사

        RANK : 247631

        강우시 발생하는 여러 사면의 얕은 파괴는 지표로 침투하는 강우의 포화깊이에 의해 발생한다. 본 연구에서는 강우시 불포화 사면의 포화깊이에 따른 안정성을 파악하기 위해 국내 화강풍화토의 함수특성곡선의 실험을 수행하였으며, 강우시 포화깊이를 계산하는 간편법과 수치해석의 결과를 비교함으로써 간편법의 적용범위와 불포화 특성에 따른 사면의 안전율을 분석하였다. 화강풍화토를 대상으로 불포화사면 해석을 위하여 국내의 전형적인 표토층을 구성하는 화강풍화토를 3가지(SW, SP, SM)로 분류하여 불포화 지반의 가장 중요한 특성인 함수특성곡선 실험을 수행하였다. 실험은 Filter Paper 방법을 이용하여 분류된 화강풍화토의 3가지 흙에 대하여 수행하고, 실험에 대한 정확도를 확인하기 위해 tensiometer를 이용하여 실험값을 검증하였다. 그리고, 산정한 화강풍화토의 함수특성곡선을 적절히 제안할 수 있는 매개변수를 제안하였다. 강우로 발생하는 사면의 포화깊이를 측정하기 위하여 Green & Ampt의 모델을 근거로 Pradel & Raad의 수정식과 수치해석 상용프로그램인 SEEP/W를 이용한 포화깊이 비교·분석으로 사용범위에 대해 수정식의 제한성을 파악하였다. 화강풍화토의 지반조건에서 수정식에 이용되는 wetting front suction은 80cm 정도에서 비교적 타당한 포화깊이를 유추할 수 있음을 알았다. 또한, 상용프로그램인 SLOPE/W를 이용하여 강우에 의한 사면의 포화깊이가 사면의 안정성에 미치는 영향을 파악하였다. 포화지반 해석에서, 사면에 포화되는 깊이에 따라 안전율을 평가하여, 대략 1.3m의 포화대(wetting band depth)를 이룰 때 사면의 안전율이 갑자기 저하됨을 알 수 있었다. 화강풍화토의 함수특성곡선을 이용하고, 불포화사면의 강도정수를 추정하여 계산된 불포화 지반의 해석이 기존의 포화사면의 해석에 비하여 보다 정확한 결과임을 알 수 있었다. The infiltration of prolonged rainfall causes surficial slopes to shallow slope ailures. In this study, experiments on the soil-water characteristic curves were performed in order to analyze the stability of unsaturated weathered slopes with respect to rainfall-induced wetting. In addition, the wetting band depth obtained from an empirical model was compared with the numerical analysis and, as the extent of wetting band depth, the surficial stability of slopes were analyzed. Experiments performed on soil-water characteristic curves in weathered soils of different three types(SW, SP, SM) were used to construct a general equation for the soil-water characteristic curve. To achieve the soil-water characteristic curve, the filter paper method was used and the conclusion of the filter paper method was verified by a tensiometer. Also, parameters of two equations(van Genuchten and Fredlund & Xing) for weathered soils were proposed. By comparing Pradel & Raad's modified method(Green & Ampt Method) with finite element analysis(SEEP/W) to measure the wetting band depth of an infinite slope due to rainfall, the application of Pradel & Raad's modified method was restricted and the adoption of Pradel & Raad's modified method was mostly adequate to assume the wetting band depth in nearly 80 cm as wetting front suction. Besides, as a result of analyzing the program, SLOPE/W, the critical depth for rainfall-induced slope failures was 1.3 m which the surficial stability of slopes was suddenly fallen.

      • Cu-Al-Ni계 형상기억합금 리본의 변태특성에 미치는 시효의 영향

        김재홍 조선대학교 대학원 2002 국내석사

        RANK : 247631

        In order to clarify the effect of the composition and wheel speed on the phase composition stability of parent phase, the Cu-Al-Ni based alloy ribbons with different Al content was manufactured by rapid solidification process at various wheel speed. Morever, the aging effect on the microstructure and transformation characteristics of the ribbons with fiber structure have been studied by using OM, SEM, TEM, XRD and DSC. The results were obtained as follows; (1) The parent phase was retained in the ribbon fabricated at faster wheel speed even same composition or in the ribbon contained higher A1 content even same wheel speed. Transformation temperature of ribbon M5 was higher than that of ribbon A5 because of lower Al content. Transformation temperature of ribbon A3 was higher than that of ribbon A5 because of lower wheel speed. The grain size of ribbon A3, M5 and A5 were 5 ㎛, 3 ㎛ and 0.5 ㎛, respectively. (2) The ribbon A5 flash-heated at 750℃ showed retained parent phase and martensite. As flash-heating temperature increased from 750℃ to 850℃, the retained parent phase almost disappeared and peak of martensite phase only appeared the retained parent phase transformed to martensite phase. The grain size of ribbon A5 became coarse and martensite plate became wide with increasing flash-heating temperature. (3) Microstructures of cross-sectional surface in as-spun ribbon A5 revealed fiber structure, while ribbon A5 flash-heated at 750℃ became columnar structure due to the grain growth in the width direction, and it changed to equiaxed structure with increasing flash-heating temperature at 800℃ and 850℃. M_s and A_s temperatures of ribbon A5 were risen, while transformation hysteresis was decreased with increasing flash-heating temperature,. (4) When ribbon A5 was aged at 60 ℃ for 10, 24, 48 and 72 hour, no remarkable changes was in phase change in spite of increasing in aging time. Microstructures of cross-sectional surface revealed fiber structures similar to as-spun ribbon A5, and grain size was unchanged evidently. Transformation temperatures in ribbon A5 aged at 601C for 10, 24, 48 and 72 hour were lower than those in ribbon A5 in as-spun. (5) When the ribbon A5 was aged at 100℃ for 10, 24, 48 and 72 hour, ribbon A5 aged for 10 and 24 hour observed both retained parent phase and a little martensite, ribbon A5 aged for 48 hour showed distinct martensite phase, and the second phase was precipitated after retained parent phase was transformed to martensite in case of ribbon A5 aged for 72 hour. Microstructures of cross-sectional surface of ribbon aged at 100℃ for 72 hour was changed to columnar structure. Transformation temperature was risen only ribbon A5 aged for 72 hour. (6) With increasing aging time at 200℃, the grain size was increased to about 2 ㎛ and both martensite and precipitates were observed. Microstructures of cross-sectional surface showed fiber and columnar structures after aging at 200℃. M_s and A_s temperatures were risen with increasing aging time.

      • 정보기술모형의 실증적 연구 : PDA사용을 중심으로

        김재홍 연세대학교 공학대학원 2003 국내석사

        RANK : 247631

        본 연구에서는 정보기술사용자의 정보기술사용행위를 설명하는 대표적인 모형인 Davis등이 연구한 기술수용모형(Davis et al., 1989)에 기초하여 PDA 사용자의 PDA 사용행위를 분석하고자 한다. 본 연구에서는 기술 수용모형의 변수인 PDA에 대한 지각된 유용성, 사용편의성을 독립변수로, PDA에 대한 태도를 매개변수로, 사용의도를 종속 변수로 설정하였다. 연구모형을 통한 결과는 다음과 같다. 첫째, PDA사용자 비사용자 두 집단 모두 사용의 편의성이 PDA에 대한 태도에 영향을 끼칠 것이라는 가설을 제외하곤 기존 연구 결과에 부합하였다. 즉 PDA유용성과 PDA에 대한 태도 두 가지 요인이 PDA사용의도에 영향을 끼친다는 것이다. 둘째, 사용편의성은 유용성에 영향을 끼쳐 사용의도에 간접적으로 영향을 끼치는 것으로 나타났다. The purpose of this research is to determine the factors affecting intention to use PDA. The results of the structural model suggested that intention to use PDA is formed by one's attitude toward PDA and perceived usefulness of PDA. Attitude toward PDA is affected by perceived usefulness of PDA. the paths from perceived ease of use of PDA to attitude toward PDA was not significant in this research. perceived usefulness of PDA is affected by perceived ease of use of PDA. So Attitude toward to PDA is affected by perceived ease of use of PDA indirectly.

      • 放熱效果를 考慮한 PCB 채널에서의 熱傳達 解析

        김재홍 조선대학교 대학원 1998 국내박사

        RANK : 247631

        In accordance with the high density of electronic equipment, the generating heat of the electronic chips affect the life and the quality of equipment. The operating temperature of electronic chip have to keep on lower than the allowed. After design, the test of cooling is necessary. But as it is very hard to change the design, it takes much time and cost with increasing the product. In this study to develope the design method for predicting the temperature distribution of printed circuit board at initial designing stages, MSC/NASTRAN software was used and run the program. Analytical model suggested the design value after predicting the temperature distribution when it was attached in 6 non-uniform heat generating chips, height 3mm from the upper face with the optimum array, radiating structure, channel space and fan for the electronic chips. The analytical results was agreed well with the experimental results and concluded as follows : 1) To improve the cooling performances, the optimum array of the electronic chips are to keep the surface distance of the chips more than two times in contrast with the height of the electronic chips. 2) When PCB structure was changed from epoxy to the aluminium plate, the heat generating effect was decreased about 42%. 3) With increasing the width of PCB channel the maximum temperature difference of air and heating block on account of convection and radiation was almost the same when aspect ratio was below 3.5 4) In case of forced convection using the cooling fan, as temperature drop was bigger in the first array than the 2 or 3 array, the installation of higher heat generating chip is more effective when it was located in front of fan.

      • 國語 名詞派生 接尾辭{-i}에 關한 語彙形態 考察

        김재홍 又石大學校 大學院 1995 국내석사

        RANK : 247631

        현대 국어의 통사적 기능 변환에 필수적인 접사 체계중에 '명사파생 접미사 {-i}계'로 형성된 어휘들을 대상으로 파생구조와 그 양상을 고찰하는데 목적을 두고, 어휘형태론에 의하여 주요내용을 장 별(章別)로 논의한 결과는 다음과 같다. ⑴ 파생어들의 조어 양상은, 동사, 형용사, 부사, 명사, 그리고 기타 의존형태소에 의하여 단일어형과 복합어형, 합성어형을 이루어져 있었다. 이들 어휘의 중핵구조는 단일어형에서 어말의 굴절접사인 {-다}형이 접미형태소{-i, -ε(e),/-m(-im),-ki,....}형에의하여 환치되면서, 첫째, 품사전성의 접미형태소{-m,(-im),-ki} 형으로 분류되어 '명사화의 이륜구조(二輪構造)'를 보이고 있었다. 따라서 이들에 관한 연구 결과에 의하면, 전자는 조어론에서 형태 분류수준을 벗어나지 못하였으나, 후자의 경우는 복합문에서 '타동사의 동족목적어'로서 명사화를 통하여 '동작성, 상태성, 과정성'이라는 의미특성이 밝혀지고 있었다. 그러므로 본 고에서는 제 1유형인 {-i,-ε(e),-mi,-ki,-thil,/- i,...}형을 대상으로 어휘 형태론적 입장에서 논의를 전개하였다. ⑵ 명사파생 접미사{-i}계를 이루는 어휘구조를 동사군{-i¹}, 형용사군{-i²}과, 여러 품사의 전성으로 새 명사가 되는 명사군{-i³}, 으로 나누어 논의한 결과, 1) 동사군 {-i},은 통어론적으로 자동사와 타동사의 단일어형의 형태소 어간으로부터 전사된 'Vs+Sxf{-i}'(용어간+단어형성의 독립점미사'{-i}')에 의하여, 어떤 사물의 동작성을 내포하는 의미구조로 파생어가 형성되고 있다. 2) 형용사군{-i²}은, 이미 중세어에서 척도 명사화소로 실현되어 화석화되었지만 현대어에서는 과정성의 동명화소{-ki}형으로 이동되기도 한다. 그러나 상태동사인 형용사는 상태성(state)의 의미 기능 때문에 '어원적 어근+[-다, -하다, -거리다, ....}'등의 파생접미사가 전성명사로 실현되고 있었으며, 부사형과 함께 인명화소, 구상화소 등으로 작용하여, '형상성'의 재파생어를 형성하고 있다. 3) 명사군{-i³}은 어원적 어근과 기존의 명사등이 새 명사 파생어 (New-Noun deri vating groups:'N')로 전성되어 유정, 무정명사의 어휘 결합에 작용하고 있다. 이러한 {-i}계의 어휘군을 대상으로 파생구조를 'III 단계의 파생모형'으로 정립한 결과, 기본형인 'Vs+Sxf{-i}'형을 '기본구조'로 하여 '부가형'으로 'N/prefix/+Vs+Sxf{-i/-ε(-e)}', 'Vs+/N/+Sxf{-i/-ε(-e)}' 와 '확장형'의 'N/Adn, DET/+N/prefiz/Vs+Sxf¹{-i}형과, '(Vs+Sxf¹{-i/-ε(E/e)}/(Sxf²)형을 '이동구조'로 정사하였다. 따라서 이를 종합하면, 명사파생 접미사의 파생모형은 'N/Adn,DET/+N/prefix/+Vs+Sxf¹{-i/-ε(-e)}/+(Sxf²)에 의하여 귀착되고 있었다. ⑶{-i}계의 어 결합 양상을 고찰하기 위하여, 유정(인명, 동물명), 무정(식물명, 지명)명사를 대상으로 논의한 결과, 예를 들면, '기럭>기럭+이>기러기'처음 음절말 자음의 단절현상을 해소하기 위하여 유,무성음의 자음'/p,t,k,/c,/s,/m,n, /,r/'를 선행 자음화하여 '{-pi, -ti, -ki, /-ci, -si, /-mi, -ni, - i, -ri'.....}형으로 조음되는 음운변화를 보여주고 있었다. ⑷{-i}계의 이동변형 현상을 고찰한 결과, 구상명사의 도구화소인{-ε, -mi, -ki, -thi, -u, -i, -i+ +i}형의 어휘가 형성되었으며, 이러한 위상적 변이현상을 서남 방언 자료에서 고찰하였다. ⑸ 결론적으로 파생접미사{-i}는 경쾌성과 변화성을 주는 음운적 특성 때문에 어휘형태론적으로 'stem+affix(의존부)'라는 '기본(중핵)구조' 접사되어 'III단계의 형태론적 'stem(어의부)affix(의존부)' 라는 '기본(중핵)구조'에 접사되어 'III단계의 판생모형'에 따라 어휘형태를 확장하여 파생어를 형성하고 있었다. 그러므로 글절접미사{-다, -하다, -거리다)형 등의 용언에서 생성되고 있는 파생어를 대상으로,'중심부(foucs)' 와 주변부(around class)'로 분류하여 명사파생 접미사의 {-i)계'를 중심으로 논의하였다. 이 중에서, 중심부는 'Vstem/base, root'에 'Der/adn.N/N-rot, prefix : 'n'가 부가되는 어떤 사물의 동작성, 상태성, 특수성(구체화), 등을 표출하고 있었다. 그리고 주변부는 의존성 독립 접미사{-i}형을 기본형으로 구상성의 도구화소{-ε(-e)/-mi,-ki,-thil}형과 형상화소(- -}형에 대하여 논의하였으며, 조음성의 유,무형 명사를 대상으로 매개자음화소'-p,-t,-k,-c,-s,-m,-n,- ,-r/+suffix{-i}'형과 그 매개 자음에 선행하는 1차 기본모음'{-a-,-o-,-ε-,-e-,-o-,-u-,-i-,-i-,/+ -/+ suffix{-i}'형이 삽인된 어휘들의 결합과 이동변화를 고찰하였다.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼