http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Jin Cao,Xiang Liu,M.A. Khan,WenQing Zhu,XueYin Jiang,ZhiLin Zhang,ShaoHong Xu 한국물리학회 2007 Current Applied Physics Vol.7 No.3
RGB pixels by microcavity top-emitting organic light-emitting diode (TOLED) is benecial to both minimizing the loss of light andimproving the color purity and the eciency. Based on the multi-emitting layers, white organic light-emitting diodes (OLEDs) andmicrocavity TOLEDs were prepared. TOLEDs were fabricated using Ag/ITO as the reector and adjusting layer, Al/Ag as semi-trans-cavity and the color of the device have been changed. So we get RGB tricolor devices. The peak wavelengths are 476 nm, 539 nm,601 nm, Commission Internationale d’Eclairage (CIE) coordinates are (0.133,0.201), (0.335,0.567), (0.513,0.360), FWHM are 32 nm,50 nm, 73 nm for blue, green and red, respectively.
Qiang Xie,Hao Gao,Yuxin Ban,Xiang Fu,Xiaowen Liang,Zhilin Cao,Jun Duan 대한토목학회 2023 KSCE Journal of Civil Engineering Vol.27 No.11
To figure out the influence of soft-hard layer thickness ratio on specimens’ mechanical properties evolution and microcracking mechanism, combined with digital image correlation technology and acoustic emission facility, uniaxial compression tests were conducted on soft-hard interbedded rock-like materials considering seven bedding dip angles and two soft-hard layer thickness ratios. The results are as follows: 1) The failure mode and failure pattern of layered rock masses are mainly determined by the bedding dip angle α and are less related to the soft-hard thickness ratio. With the increase of dip angle, the failure strength curve of the specimen is approximately U-shaped, and the soft-hard layer thickness ratio affects the U-shaped. The decrease in soft-hard layer thickness ratio will reduce the uniaxial compressive strength of specimens with low dip angles (α≦30°), cause differences in the evolution path of local strain fields of layered rock masses and reduce the horizontal displacement of the main crack. 2) The increase of the proportion of soft layer in the soft-hard layer thickness ratio will reduce the proportion of tensile cracks in the tensile failure specimens and shear cracks in the shear failure specimens, complicating the process of cracks of the layer rock mass. 3) Increasing the proportion of soft layers in the soft-hard layers thickness ratio promotes the generation of secondary cracks in layered rock masses and further reduces the integrity of specimens. Finally, through the findings in this paper, it can provide a reference for analyzing the crack propagation behavior of layered rock.