http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Preparation of PAN/GO composite nanofiber membrane for oil-containing wastewater treatment
Lu Tong,Zhang Qingxia,Yang Jingjing,Xin Yue,Zhang Zhilei,Hu Lingye,Hu Jing,Qin Qin,Yang Hao 한국탄소학회 2024 Carbon Letters Vol.34 No.1
The discharge of industrial oily wastewater and oil spill accidents has resulted in significant environmental pollution, creating an urgent need for the treatment of oily wastewater. Nanofiber membranes, known for their high stability, flux, and efficiency, are widely employed in oil–water separation. This study systematically compared the performance of polyacrylonitrile/graphene oxide (PAN/GO) composite nanofiber membranes prepared through immersion and electrospinning methods for oily wastewater treatment. Experimental findings demonstrated that immersion-prepared membranes achieved high flux (772.9 ± 2.9 L·m−2·h−1, n-hexane/water mixture) and efficiency (98.8%) at a GO concentration of 1.0 g/mL. On the other hand, electrospinning-prepared membranes exhibited superior flux (1500.3 ± 4.4 L·m−2·h−1, n-hexane/water mixture) and efficiency (99.6%) at a higher GO concentration (1.5 g/mL). This membrane displayed excellent stability, maintaining their exceptional performance even after ten cycles of separation. This study compared the advantages and disadvantages of the two methods for preparation of PAN/GO composite nanofiber membrane, offering valuable guidance for practical applications.
Rectifying resistance switching behaviors of SnO2 microsphere films modulated by top electrodes
Rongchun Yuan,Weiwei Xia,Mengxue Xu,Zhilei Miao,Shudong Wu,Xiuyun Zhang,Junhui He,Qiang Wang 한국물리학회 2020 Current Applied Physics Vol.20 No.3
Based on the bipolar resistive switching (RS) characteristics of SnO2 films, we have fabricated a new prototypical device with sandwiched structure of Metal/SnO2/fluorine-doped tin oxide (FTO). The SnO2 microspheres film was grown on FTO glass by template-free hydrothermal synthesis, which was evaporated with various commonly used electrodes such as aluminium (Al), silver (Ag), and gold (Au), respectively. Typical self-rectifying resistance switching behaviors were observed for the RS devices with Al and Au electrodes. However, no obvious rectifying resistance switching behavior was observed for the RS device with Ag electrode. Above results were interpreted by considering the different interface barriers between SnO2 and top metal electrodes. Our current studies pave the ways for modulating the self-rectifying resistance switching properties of resistive memory devices by choosing suitable metal electrodes.
Xin Lv,Yelidana Nuertai,Qiwei Wang,Di Zhang,Xumin Hu,Jiabao Liu,Ziliang Zeng,Renyuan Huang,Zhihao Huang,Qiancheng Zhao,Wenpeng Li,Zhilei Zhang,Liangbin Gao 대한척추신경외과학회 2024 Neurospine Vol.21 No.1
Objective: To compare the clinical outcomes and biomechanical characteristics of 1-, 2-, and 3-level pedicle subtraction osteotomy (PSO), and establish selection criteria based on preoperative radiographic parameters. Methods: Patients undergone PSO to treat ankylosing spondylitis from February 2009 to May 2019 in Sun Yat-sen Memorial Hospital of Sun Yat-sen University were enrolled. According to the quantity of osteotomy performed, the participants were divided into group A (1-level PSO, n = 24), group B (2-level PSO, n = 19), and group C (3-level PSO, n = 11). Clinical outcomes were assessed before surgery and at the final follow-up. Comparisons of the radiographic parameters and quality-of-life indicators were performed among and within these groups, and the selection criteria were established by regression. Finite element analysis was conducted to compare the biomechanical characteristics of the spine treated with different quantity of osteotomies under different working conditions. Results: Three-level PSO improved the sagittal parameters more significantly, but resulted in longer operative time and greater blood loss (p < 0.05). Greater stress was found in the proximal screws and proximal junction area of the vertebra in the model simulating 1-level PSO. Larger stress of screws and vertebra was observed at the distal end in the model simulating 3-level PSO. Conclusion: Multilevel PSO works better for larger deformity correction than single-level PSO by allowing greater sagittal parameter correction and obtaining a better distribution of stress in the hardware construct, although with longer operation time and greater blood loss. Three-level osteotomy is recommended for the patients with preoperative of global kyphosis > 85.95°, T1 pelvic angle > 62.3°, sagittal vertical alignment > 299.55 mm, and pelvic tilt+ chin-brow vertical angle > 109.6°.