Brazier effect of single- and double-walled elastic tubes under pure bending

Sato, Motohiro,Ishiwata, Yuta Techno-Press 2015 Structural Engineering and Mechanics, An Int'l Jou Vol.53 No.1

The cross sections of hollow cylindrical tubes ovalise under a pure bending condition, and this reduces their flexural stiffness as their curvatures increase. It is important to accurately evaluate this phenomenon, known as the 'Brazier effect', to understand the bending behaviour of the systems considered. However, if the tubes are supported by an elastic medium or foundation, the ovalisation displacements of their cross sections may decrease. From this point of view, the purpose of this research is to analytically investigate the bending characteristics of single- and double-walled elastic tubes contacted by an elastic material by considering the Brazier effect. The Brazier moment, which is the maximum moment-carrying capacity of the ovalised cross section, can be calculated by introducing the strain energy per unit length of the tube in terms of the degree of ovalisation for the tube and the curvature. The total strain energy of the double-walled system is the sum of the strain energies of the outer and inner tubes and that of the compliant core. Results are comparatively presented to show the variation in the degree of ovalisation and the Brazier moment for single- and double-walled tubes.

Brazier effect of single- and double-walled elastic tubes under pure bending

Motohiro Sato,Yuta Ishiwata 국제구조공학회 2015 Structural Engineering and Mechanics, An Int'l Jou Vol.53 No.1

The cross sections of hollow cylindrical tubes ovalise under a pure bending condition, and thisreduces their flexural stiffness as their curvatures increase. It is important to accurately evaluate this phenomenon, known as the „Brazier effect‟, to understand the bending behaviour of the systems considered. However, if the tubes are supported by an elastic medium or foundation, the ovalisation displacements of their cross sections may decrease. From this point of view, the purpose of this research is to analytically investigate the bending characteristics of single- and double-walled elastic tubes contacted by an elastic material by considering the Brazier effect. The Brazier moment, which is the maximum moment-carrying capacity of the ovalised cross section, can be calculated by introducing the strain energy per unit length of the tube in terms of the degree of ovalisation for the tube and the curvature. The total strain energy of the double-walled system is the sum of the strain energies of the outer and inner tubes and that of the compliant core. Results are comparatively presented to show the variation in the degree of ovalisation and the Brazier moment for single- and double-walled tubes.

Approximate formulation for bifurcation buckling loads of axially compressed cylindrical shells with an elastic core

Sato, Motohiro,Shimazaki, Kenta Techno-Press 2011 Interaction and multiscale mechanics Vol.4 No.4

This paper proposes an approximate formulation to estimate the bifurcation buckling loads of cylindrical shells with soft elastic cores under the conditions of axial compression. In general, thin-walled, axially compressed cylindrical shells buckle into a diamond pattern in the elastic range. However, buckling symmetrical with respect to the axis of the cylinder may occur when the cylindrical shell is supported by an elastic medium. By considering this characteristic, we introduce the simplified approximate formulation that can give sufficiently accurate results for the bifurcation buckling loads of cylindrical shells. Moreover the results are compared with the exact buckling loads in order to confirm the accuracy of the proposed approximate formulation.

Buckling characteristics of multiwalled carbon nanotubes under external pressure

Sato, Motohiro,Shima, Hiroyuki Techno-Press 2009 Interaction and multiscale mechanics Vol.2 No.2

This article describes recent work on mechanics of carbon nanotubes, one of the most fundamental and amazing man-made nanostructures. The noteworthy point is that "nano"-scale mechanics of carbon nanotubes can be well described by the continuum elastic theories for "macro"-scale thin shells. This provides an efficient means to elucidate mechanical deformation effects of carbon nanotubes on their physical and chemical properties, which is significant to develop new-generation nanomaterials based on nanotubes and their composites. Potential applications of the mechanical deformation of nanotubes in nano-electronics and nano-biology are also commented. In addition, theoretical investigations regarding external pressure buckling is carried out here and we have numerically confirmed that larger N (the number of layers) and a smaller D (the innermost diameter) make "corrugation modes" with a larger mode-index k be energetically favored.

Effect of open-core screw dislocation on axial conductivity in semiconductor crystals

Taira, Hisao,Sato, Motohiro Techno-Press 2013 Advances in nano research Vol.1 No.3

The alternating current (AC) conductivity in semiconductor crystals with an open-core screw dislocation is studied in the current work. The screw dislocation in crystalline media results in an effective potential field which affects the electronic transport properties of the system. Therefore, from a technological view point, it is interesting to investigate properties of AC conductivity at frequencies of a few terahertz. To quantify the screw-induced potential effect, we calculated the AC conductivity of dislocated crystals using the Kubo formula. The conductivity showed peaks within the terahertz frequency region, where the amplitude of the AC conductivity was large enough to be measured in experiments. The measurable conductivity peaks did not arise in dislocation-free crystals threaded by a magnetic flux tube. These results imply different conductivity mechanisms in crystals with a screw dislocation than those threaded by a magnetic flux tube, despite the apparent similarity in their electronic eigenstates.

Measurement of Exhaled Nitric Oxide in Children: A Comparison Between NObreath® and NIOX VERO® Analyzers

Yoko Inoue,Sakura Sato,Tetsuharu Manabe,Eishi Makita,Masako Chiyotanda,Kyohei Takahashi,Hitoshi Yamamoto,Noriyuki Yanagida,Motohiro Ebisawa 대한천식알레르기학회 2018 Allergy, Asthma & Immunology Research Vol.10 No.5

Purpose: Few studies have compared fractional exhaled nitric oxide (FeNO) measurement by NIOX VERO® (NOV) and other devices in children. Moreover, there is no agreement between differences in FeNO values obtained using different devices in adults. Here, we compared FeNO values obtained using NOV and NObreath® (NOB) systems to derive a correction equation for children. Methods: Eighty-eight participants (age 7–15 years) who were diagnosed with atopic bronchial asthma and visited Sagamihara National Hospital as outpatients between January and April of 2017 were included. We measured FeNO values obtained using NOB and NOV, and analyzed them using Wilcoxon tests and Altman-Bland plots. Results: The median age of the participants was 11.5 years, and the scored Asthma Control Test (ACT) or Childhood ACT (C-ACT) was 25 (interquartile range, 24–25) or 26 (24–27). NOB and NOV values were significantly different (31 [14–52] versus 36 [20–59] ppb; P = 0.020) and strongly correlated (r = 0.92). An equation to convert NOB values into NOV values was derived using linear regression as follows: log NOV = 0.7329 × log NOB + 0.4704; NOB for 20, 40, 58, 80 and 100 ppb corresponded to NOV for 27, 44, 59, 73 and 86 ppb. Thus, NOB < 58 ppb suggested NOB < NOV, whereas NOB > 58 ppb suggested NOB > NOV. Conclusions: NOB and NOV values were strongly correlated. Participants whose FeNO values were relatively low represented NOB < NOV, whereas those whose FeNO values were relatively high represented NOB > NOV.

Airfoil Design for Martian Airplane Considering Using Global Optimization Methodology

Kanazaki, Masahiro,Utsuki, Motohiro,Sato, Takaya,Matsushima, Kisa The Society for Aerospace System Engineering 2015 International Journal of Aerospace System Engineer Vol.2 No.2

To design airfoils for novel airplanes, new knowledge of aerodynamics is required. In this study, modified Parametric SECtion (PARSEC) which is a airfoil representation is applied to airfoil design using a multi-objective genetic algorithm to obtain an optimal airfoil for consideration in the development of a Martian airplane. In this study, an airfoil that can obtain a sufficient lift and glide ratio under lower thrust is considered. The objective functions are to maximize maximum lift-to-drag ratio and to maximize the trailing edge thickness. In this way, information on the low Reynolds number airfoil could be extracted efficiently. The optimization results suggest that the airfoil with a sharper thickness at the leading edge and higher camber at the trailing edge is more suitable for a Martian airplane. In addition, several solutions which has thicker trailing edge thickness were found.

Oral Immunotherapy in Food Allergy: Where Are We Now?

Özdemir Pınar Gökmirza,Sato Sakura,Yanagida Noriyuki,Ebisawa Motohiro 대한천식알레르기학회 2023 Allergy, Asthma & Immunology Research Vol.15 No.2

Food allergy (FA) has become more prevalent and problematic in the last 2 decades, and it poses important individual, social, and economic burdens. Besides treating reactions induced by accidental exposure and periodic evaluation for acquiring natural tolerance, the primary management approach is still allergen avoidance as a global standard. However, an active therapeutic approach that can raise the reaction threshold or accelerate tolerance is needed. This review aimed to provide an overview and the latest evidence of oral immunotherapy (OIT), which has recently been used in the active treatment of FA. FA immunotherapy, particularly OIT, is gaining considerable interest, and substantial effort has been made to integrate this active treatment into clinical practice. Consequently, growing evidence has been obtained regarding the efficacy and safety of OIT, particularly for allergens such as peanuts, eggs, and milk. However, several issues need to be addressed regarding the availability, safety, and long-term effects of this intervention. In this review, we summarize currently available information regarding tolerance-inducing immune mechanisms of OIT, data on efficacy and safety, gaps in current evidence, and ongoing research to develop new therapeutic molecules in order to enhance safety.

Radial deformation and band-gap modulation of pressurized carbon nanotubes

Taira, Hisao,Shima, Hiroyuki,Umeno, Yoshitaka,Sato, Motohiro Techno-Press 2013 Coupled systems mechanics Vol.2 No.2

We numerically investigate the electronic band structure of carbon nanotubes (CNTs) under radial corrugation. Hydrostatic pressure application to CNTs leads to a circumferential wave-like deformation of their initially circular cross-sections, called radial corrugations. Tight-binding calculation was performed to determine the band gap energy as a function of the amplitude of the radial corrugation. We found that the band gap increased with increasing radial corrugation amplitude; then, the gap started to decline at a critical amplitude and finally vanished. This non-monotonic gap variation indicated the metal-semiconductor-metal transition of CNTs with increasing corrugation amplitude. Our results provide a better insight into the structure-property relation of CNTs, thus advancing the CNT-based device development.