http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
과산화수소 하이브리드 로켓을 위한 접촉점화성 고체연료의 점화 특성
정준영(Junyeong Jeong),Vikas Khandu Bhosale,권세진(Sejin Kwon) 한국추진공학회 2019 한국추진공학회 학술대회논문집 Vol.2019 No.5
접촉점화성 하이브리드 로켓은 산화제가 고체연료에 직접 분사되어 접촉 점화되는 시스템을 가지고 있어 시스템이 간단하고 신뢰성이 높으며 응답성이 뛰어나다는 장점이 있다. 하지만 신뢰성있는 점화성능을 확보하기 위해 일정하고 짧은 점화지연을 가지는 연료를 제작하는 것이 중요하다. 본 연구에서는 95 wt% 과산화수소 기반 하이브리드 로켓을 위한 접촉점화성 고체연료를 제작, 검증하였다. 파라핀왁스 기반 접촉점화성 고체연료의 제작 공정을 수립하고, 환원제의 종류, 농도, 그리고 첨가제의 종류에 따른 점화성능에 대해 연구하였다. Hypergolic hybrid rocket has a system in which the oxidizer is injected directly into the solid fuel and ignited at the same time, so its system is very simple and reliable. However, it is important to fabricate hypergolic fuel with constant and short ignition delay to ensure the reliable ignition performance. In this study, hypergolic solid fuels for 95 wt% hydrogen peroxide based hybrid rocket were fabricated and evaluated. The manufacturing process of paraffin wax based hypergolic solid fuel was established and the ignition characteristics according to the type and concentration of the reducing agents was studied. In addition, change of the ignition characteristics according to the additives was studied.
김예현(Yehyun Kim),정준영(Junyeong Jeong),김현탁(Hyuntak Kim),권세진(Sejin Kwon) 한국추진공학회 2020 한국추진공학회 학술대회논문집 Vol.2020 No.11
본 연구에서는 90 wt.% 과산화수소 기반 단일 추진제 추력기의 가변 추력을 위한 이중판 인젝터를 장착하여 연소 실험을 진행함으로써 추력 제어가 가능함을 검증했다. 제안된 인젝터는 파이형 플레이트와 샤워헤드형 플레이트로 구성된 이중판 인젝터로써, 이 인젝터는 두 판을 교차시켜 유량을 조절하도록 설계되었다. 본 연구에서는 연소 시험을 통해 인젝터의 가능성을 검증하였으며, 조절된 유량에 따른 연소실 압력 형성에 대한 분석을 진행하였다. This paper is to verify a suggested throttleable injector by equipping on a monopropellant thruster that used 90 wt.% hydrogen peroxide. The proposed injector was a dual-plate injector that consists of a pi-type plate and a showerhead-type plate. The concept of this injector was to change the mass flow rate by adjusting and intersecting the two plates. Through the firing tests under the various injectant flow rates, the feasibility of the conceptual design of the injector was confirmed. Furthermore, the experimental data of chamber pressure according to the injectant flow rate was evaluated.