Genetic Variants at 6p21.1 and 7p15.3 Identified by GWASs of Multiple Cancers and Ovarian Cancer Risk: a Case-control Study in Han Chinese Women

Li, Da-Ke,Han, Jing,Liu, Ji-Bin,Jin, Guang-Fu,Qu, Jun-Wei,Zhu, Meng,Wang, Yan-Ru,Jiang, Jie,Ma, Hong-Xia Asian Pacific Journal of Cancer Prevention 2014 Asian Pacific journal of cancer prevention Vol.15 No.1

A recent study summarized several published genome-wide association studies (GWASs) of cancer and reported two pleiotropic loci at 6p21.1 and 7p15.3 contributing to multiple cancers including lung cancer, noncardia gastric cancer (NCGC), and esophageal squamous-cell carcinoma (ESCC) in Han Chinese. However, it is not known whether such genetic variants have similar effects on the risk of gynecologic cancers, such as ovarian cancer. Hence, we explored associations between genetic variants in 6p21.1 and 7p15.3 and ovarian cancer risk in Han Chinese women. We performed an independent case-control study by genotyping the two loci (rs2494938 A > G at 6p21.1 and rs2285947 A > G at 7p15.3) in a total of 377 ovarian cancer cases and 1,034 cancer-free controls using TaqMan allelic discrimination assay. We found that rs2285947 at 7p15.3 was significantly associated with risk of ovarian cancer with per allele odds ratio (OR) of 1.33 [95% confidence interval (CI): 1.08-1.64, P=0.008]. However, no significant association was observed between rs2494938 and ovarian cancer risk. Our results showed that rs2285947 at 7p15.3 may also contribute to the development of ovarian cancer in Han Chinese women, further suggesting pleiotropy of 7p15.3 in multiple cancers.

Sub‑synchronous resonance in grid‑forming PMSGs connected to series‑compensated networks

Han Jiang,Zhengchun Du,Xiaotian Yuan,Jinlong Han 전력전자학회 2024 JOURNAL OF POWER ELECTRONICS Vol.24 No.4

The sub-synchronous resonance (SSR) characteristics and countermeasures of grid-forming permanent magnet synchronous generators (PMSGs) controlled by DC voltage synchronization control (DVSC) are investigated in this paper. First, smallsignal models of two PMSGs connected to a series-compensated network are established, where a recently developed gridforming control, i.e., DVSC is applied. Then, a modal-analysis method is conducted to evaluate the impacts of the control parameters, series compensation level (SCL), and electrical distances on stability. It is interesting to see that PMSGs with DVSC exhibit unstable SSR like traditional synchronous generators. Moreover, the dominant wind turbine (WT) is investigated using participate factor analysis. Then, a simple but effective SSR damping controller (SSRDC) is designed using feedforward control signals, which is only activated when SSR occurs. It is shown that the designed controller can provide strong damping support for SSR suppression. Electromagnetic transient simulations are performed in different scenarios to find the unstable SSR conditions, as well as to verify the correctness of the SSR analysis and the effectiveness of the proposed SSR damping scheme.

An Ultra-narrow Bandwidth Filter for Daytime Wind Measurement of Direct Detection Rayleigh Lidar

Han, Fei,Liu, Hengjia,Sun, Dongsong,Han, Yuli,Zhou, Anran,Zhang, Nannan,Chu, Jiaqi,Zheng, Jun,Jiang, Shan,Wang, Yuanzu Optical Society of Korea 2020 Current Optics and Photonics Vol.4 No.1

A Rayleigh Lidar used for wind detection works by transmitting laser pulses to the atmosphere and receiving backscattering signals from molecules. Because of the weak backscattering signals, a lidar usually uses a high sensitivity photomultiplier as detector and photon counting technology for signal collection. The capturing of returned extremely weak backscattering signals requires the lidar to work on dark background with a long time accumulation to get high signal-to-noise ratio (SNR). Because of the strong solar background during the day, the SNR of lidar during daytime is much lower than that during nighttime, the altitude and accuracy of detection are also restricted greatly. Therefore this article describes an ultra-narrow bandwidth filter (UNBF) that has been developed on 354.7 nm wavelength of laser. The UNBF is used for suppressing the strong solar background that degrades the performance of Rayleigh wind lidar during daytime. The optical structure of UNBF consists of an interference filter (IF), a low resolution Fabry-Perot interferometer (FPI) and a high resolution FPI. The parameters of each optical component of the UNBF are presented in this article. The transmission curve of the aligned UNBF is measured with a tunable laser. Contrasting the result of with-UNBF and with-IF shows that the solar background received by a Licel transient recorder decreases by 50~100 times and that the SNR with-UNBF was improved by 3 times in the altitude range (35 km to 40 km) compared to with-IF at 10:26 to 10:38 on August 29, 2018. By the SNR comparison at four different times of one day, the ratio-values are larger than 1 over the altitude range (25~50 km) in general, the results illustrate that the SNR with-UNBF is better than that with-IF for Rayleigh Lidar during daytime and they demonstrate the effective improvements of solar background restriction of UNBF.

Fabrication of PHBV/Keratin Composite Nanofibrous Mats for Biomedical Applications

Yuan, Jiang,Xing, Zhi-Cai,Park, Suk-Woo,Geng, Jia,Kang, Inn-Kyu,Yuan, Jiang,Shen, Jian,Meng, Wan,Shim, Kyoung-Jin,Han, In-Suk,Kim, Jung-Chul The Polymer Society of Korea 2009 Macromolecular Research Vol.17 No.11

Keratin is an important protein used in wound healing and tissue recovery. In this study, keratin was modified chemically with iodoacetic acid (IAA) to enhance its solubility in organic solvent. Poly(hydroxybutylate-co-hydroxyvalerate) (PHBV) and modified keratin were dissolved in hexafluoroisopropanol (HFIP) and electrospun to produce nanofibrous mats. The resulting mats were surface-characterized by ATR-FTIR, field-emission scanning electron microscopy (FE-SEM) and electron spectroscopy for chemical analysis (ESCA). The pure m-keratin mat was cross-linked with glutaraldehyde vapor to make it insoluble in water. The biodegradation test in vitro showed that the mats could be biodegraded by PHB depolymerase and trypsin aqueous solution. The results of the cell adhesion experiment showed that the NIH 3T3 cells adhered more to the PHBV/m-keratin nanofibrous mats than the PHBV film. The BrdU assay showed that the keratin and PHBV/m-keratin nanofibrous mats could accelerate the proliferation of fibroblast cells compared to the PHBV nanofibrous mats.

[OP-11] Studies on Effects of L-Carnitine on Hepa 1c1c 7 Cell Apoptosis

Fan Jiang Ping,Bo Young Jeong,Da Hey Choi,Kyoung Min Choi,Yoon Joo Lee,Han Seop Kim,Gi Dong Han 한국식품영양과학회 2006 한국식품영양과학회 학술대회발표집 Vol.2006 No.10

Software Defect Model Based on Similarity and Association Rule

Wan Jiang Han,He Yang Jiang,Tian Bo Lu,Xiao Yan Zhang,Weijian Li 보안공학연구지원센터 2015 International Journal of Multimedia and Ubiquitous Vol.10 No.7

In order to detect defects efficiently and improve the quality of products, this paper puts forward the concept about defect classification model and defect association model by a lot of defect data. The technology of similarity is applied to defect classification model, and the idea of Knowledge Discovery in Database is applied to defect association model. Defect classification model can analyze the defect efficiently and provides the basis of solving problems quickly while defect association model can be used to detect early and prevent problem, which can make effective improvements for testing and development. This paper summed up GUI defect model based on a large number of interface defects. The model is useful to improve the accuracy of forecast and be used for test planning and implementation through the practice of several projects.

Study on the role of gga-miRNA-200a in regulating cell differentiation and proliferation of chicken breast muscle by targeting Grb2

Keren Jiang,Fengbin Yan,Meng Zhang,Fang Li,Donghua Li,Guirong Sun,Xiaojun Liu,Hong Li,Ruili Han,Ruirui Jiang,Zhuanjian Li,Xiangtao Kang 한국통합생물학회 2017 Animal cells and systems Vol.21 No.6

Growth factor receptor-bound protein 2 (Grb2) have been proved by a lot of studies playing a major role in cell proliferation and cell differentiation. However, the regulation of Grb2 expression by microRNAs (miRNAs) in chicken breast muscle still remains unknown. The expression profile of Grb2 was checked based on our previous RNA sequencing data and the Grb2 relative expression level in breast muscle of aged hens (55-week-old) was validated significantly higher than juvenile hens (20-week-old) using qRT-PCR. miRNAs that interact with Grb2 have been predicted in chicken and the relationship between the potential miRNA and Grb2 was verified using dual luciferase reporter assay in chicken DF1 cells. Dual-luciferase reporter assays results demonstrated that the expression of luciferase reporter gene linked with part sequence of the 3′UTR of chicken Grb2 gene was down-regulated by the overexpression of gga (Gallus Gallus)- miR-200a-3p in the DF1 cells, and the down-regulation behavior was abolished when the ggamiR- 200a-3p binding site in 3′UTR of Grb2 was mutated, indicating that gga-miR-200a can suppress the expression level of its target gene Grb2. Therefore, we concluded that the significantly increased expression level of Grb2 in the breast muscle of aged chicken can (at least partly can) be explained by the decreased expression of miR-200a, which reduced the inhibitory effect on Grb2. Taken together, these findings suggest that gga-miR-200a can suppress the expression level of its target gene Grb2 and might be involved in the cell differentiation and proliferation of chicken breast muscle through binding with the 3’UTR of Grb2.

An Ultra-narrow Bandwidth Filter for Daytime Wind Measurement of Direct Detection Rayleigh Lidar

Fei Han,Hengjia Liu,Dongsong Sun,Yuli Han,Anran Zhou,Nannan Zhang,Jiaqi Chu,Jun Zheng,Shan Jiang,Yuanzu Wang 한국광학회 2020 Current Optics and Photonics Vol.4 No.1

A Rayleigh Lidar used for wind detection works by transmitting laser pulses to the atmosphere and receiving backscattering signals from molecules. Because of the weak backscattering signals, a lidar usually uses a high sensitivity photomultiplier as detector and photon counting technology for signal collection. The capturing of returned extremely weak backscattering signals requires the lidar to work on dark background with a long time accumulation to get high signal-to-noise ratio (SNR). Because of the strong solar background during the day, the SNR of lidar during daytime is much lower than that during nighttime, the altitude and accuracy of detection are also restricted greatly. Therefore this article describes an ultra-narrow bandwidth filter (UNBF) that has been developed on 354.7 nm wavelength of laser. The UNBF is used for suppressing the strong solar background that degrades the performance of Rayleigh wind lidar during daytime. The optical structure of UNBF consists of an interference filter (IF), a low resolution Fabry-Perot interferometer (FPI) and a high resolution FPI. The parameters of each optical component of the UNBF are presented in this article. The transmission curve of the aligned UNBF is measured with a tunable laser. Contrasting the result of with-UNBF and with-IF shows that the solar background received by a Licel transient recorder decreases by 50~100 times and that the SNR with-UNBF was improved by 3 times in the altitude range (35 km to 40 km) compared to with-IF at 10:26 to 10:38 on August 29, 2018. By the SNR comparison at four different times of one day, the ratio-values are larger than 1 over the altitude range (25~50 km) in general, the results illustrate that the SNR with-UNBF is better than that with-IF for Rayleigh Lidar during daytime and they demonstrate the effective improvements of solar background restriction of UNBF.

Performance of Continuous-wave Coherent Doppler Lidar for Wind Measurement

Shan Jiang,Dongsong Sun,Yuli Han,Fei Han,Anran Zhou,Jun Zheng 한국광학회 2019 Current Optics and Photonics Vol.3 No.5

A system for continuous-wave coherent Doppler lidar (CW lidar), made up of all-fiber structures and a coaxial transmission telescope, was set up for wind measurement in Hefei (31.84 N, 117.27 E), Anhui province of China. The lidar uses a fiber laser as a light source at a wavelength of 1.55 µm, and focuses the laser beam on a location 80 m away from the telescope. Using the CW lidar, radial wind measurement was carried out. Subsequently, the spectra of the atmospheric backscattered signal were analyzed. We tested the noise and obtained the lower limit of wind velocity as 0.721 m/s, through the Rayleigh criterion. According to the number of Doppler peaks in the radial wind spectrum, a classification retrieval algorithm (CRA) combining a Gaussian fitting algorithm and a spectral centroid algorithm is designed to estimate wind velocity. Compared to calibrated pulsed coherent wind lidar, the correlation coefficient for the wind velocity is 0.979, with a standard deviation of 0.103 m/s. The results show that CW lidar offers satisfactory performance and the potential for application in wind measurement.

An efficient Agrobacterium-mediated transformation method for aflatoxin generation fungus Aspergillus flavus

Guomin Han,Qian Shao,Cuiping Li,Kai Zhao,Li Jiang,Jun Fan,Haiyang Jiang,Fang Tao 한국미생물학회 2018 The journal of microbiology Vol.56 No.5

Aspergillus flavus often invade many important corps and produce harmful aflatoxins both in preharvest and during storage stages. The regulation mechanism of aflatoxin biosynthesis in this fungus has not been well explored mainly due to the lack of an efficient transformation method for constructing a genome-wide gene mutant library. This challenge was resolved in this study, where a reliable and efficient Agrobacterium tumefaciens-mediated transformation (ATMT) protocol for A. flavus NRRL 3357 was established. The results showed that removal of multinucleate conidia, to collect a homogenous sample of uninucleate conidia for use as the transformation material, is the key step in this procedure. A. tumefaciens strain AGL-1 harboring the ble gene for zeocin resistance under the control of the gpdA promoter from A. nidulans is suitable for genetic transformation of this fungus. We successfully generated A. flavus transformants with an efficiency of ~ 60 positive transformants per 106 conidia using our protocol. A small-scale insertional mutant library (~ 1,000 mutants) was constructed using this method and the resulting several mutants lacked both production of conidia and aflatoxin biosynthesis capacity. Southern blotting analysis demonstrated that the majority of the transformants contained a single T-DNA insert on the genome. To the best of our knowledge, this is the first report of genetic transformation of A. flavus via ATMT and our protocol provides an effective tool for construction of genome-wide gene mutant libraries for functional analysis of important genes in A. flavus.