고전소설 연구의 몇몇 국면에 대한 반성적 고찰

정출헌 고려대학교 민족문화연구원 한국문학연구소 2002 한국문학연구 Vol.- No.3

A classical novel is one of the literary genre that one of the most important literary genre which is changed place from the trivial genre to the most important genre, which is rapidly developed from the latter beinning to the most fastest developed genre, and is the genre which is within the bounds of possibility for jumping over the deep gap between the upper and lower classes and make them feel togther cultural and emotional sympathy.For these respects, the novel genre cannot be lightly dealt with it.But without some basic reflection for the some aspects about the reconsideration of the classical novels's, we cannot evolve the new area of research. First, the evaluation of the classical novel genre based on the modern view of literature. We've overestimated the novel, the modern genre, rather than real image, but the other genres get out of it have been underestimated rather than real image.Now, we need to valuate these genres fairly.Second, the evaluation of the classical novel genre based upon the national literary view.We've estimated the classical novel according to the quantity of the national point of view.But we need to evaluate the both sides of the inner part of the national development and the effect of the outer world.Third is the evaluation of the severe exclusion about the medieval view of literature.We've evaluated the aspects of literature that is dispositioned with the medieval view of literature in classical novels are the intentions of the modern literature directly.Because they established that the medieval aspects are the object of the overcome.But the view of medieval literature itself is to be valued fairly without being buried to the modern view of literature. Things are easy to be criticized, but are difficult to solve practically.The three aspects of being critically examined far now-'the completion of the modern literature', 'the cherishment of the national literature', 'the overcome of the medieval literature'-are the thems which is the main topic leading our classical novel research over the last period. Neverthless we had to reconsider critically these things. To sublimate the love to one more higher level, it is to be believed that we have to step back from the blind love of the youth.Isn't that only so one can see one's lover's face rightly?

環境施設의 費用分析 : 糞尿處理場을 中心으로

朴出在,金秀生 동아대학교 환경문제연구소 1983 硏究報告 Vol.7 No.1

In the paper, the author examined the economics on Nightsoil Treatment Paln's of domestic environmental facilities which have been conrtructed in this country. Nightsoil Treatment Plants are classified to the type of Urban and Rural, and investigated mainly the Construction, Operating and Maintenance, and Electricity Cost of Aerobic and Anaerobic systems. Ultimately, the author intended to make the study a guide for planning and operating the environmental facilities.

A study on the lay-out th interior for solving the personal & comfortable space problems of light-train

Choi, Mi-Soon,최출헌 대불대학교 1999 論文集 Vol.5 No.1

21세기를 눈앞에 둔 우리는 이제 환경 친화적 교통 수단을 육성하지 않으면 안되는 기로에 서 있다. 이 대안 중의 하나가 경전철을 포함한 도시 철도인 것이다. 경량 전철을 포함한 도시 철도동 신 교통 수단의 대부분은 공해 물질 배출 감소, 높은 에너지 소비 효율, 교통 체증의 해결 등의 장점이 있는 관계로 도시 철도가 현재와 미래를 위한 최적의 운송 수단일 것이라 확신하며, 사람들의 욕구 만족과 환경을 조화시킨 경전철의 디자인 개발이 필요한 시점에 왔다. 본고에서는 경전 철 디자인에 앞서 대중 교통을 일반인이 타고 싶다는 의욕을 느낄수 있도록 신 교통 수단중의 하나의 경전 철의 안락한 거주 공간을 확보하기 위한 실내공간 배치와 디자인 개발을 위한 디자인 요소를 제시하고자 한다. 이것은 기존의 지하철을 기준으로 실내 공간을 배치한 것으로 기존의 지하철의 디자인 요소의 재조명도 아울러 설명할 수 있음을 보인다.

황화수소취기의 생물학적 탈취

전기일,박출재,이태호 진주산업대학교 1992 論文集 Vol.30 No.-

본 실험은 黃化水素 취기를 생물학적 방법으로 제거하기 위하여 함수율, 용도, 영양염류 등을 변화시키면서 생물학적 최적조건을 발견한 다음 황화수소 입구농도를 100, 200, 300ppm, 표면적 부하를 40, 60, 80㎥/㎡·hr로 변화시켜 결과 다음과 같은 결론을 얻었다. 낙엽 Compost에 의한 생물학적 탈취는 가능하였으며, 낙엽 Compost를 이용하여 황화수소 취기의 탈취를 위한 생물학적 최적온도를 온도 20~30℃, 함수율 62±3%이었다. 표면적부하 40㎥/㎡·hr, 충진층 높이 50㎝에서 황화수소의 농도별 제거율은 100ppm에서 99.9%이상, 200ppm에서 99.2%, 300ppm에서는 84%였으며, 농도 200ppm, 충진층높이 90㎝에서 표면적 부하를 40, 60, 80㎥/㎡·hr로 변화시켰을 때 제거율은 각각 99.9%이상, 99.9%, 85%이었다. The stydy was performed to remove hydrogen sulfide odor gas by the bio-filter. The optimum conditions of water contents, temp., and inorgarnic matters for this method was determined with a fixed concentration of hydrogen sulfide odor gas. Under this optimum conditions, the follwing results were obtained from various concentrations of hydrogen sulfide odor gas(100, 200, 300 ppm) and surface area load(40, 60, 80 ㎥/㎡·hr). Biological deodorization by leaf compost was feasible and its optimum condition of temperature and water contents was 20~30℃ and 62土3%, respectively. The rate of deordorization of hydrogen sulfide odor gag(100, 200, 300 ppm) with he height of packing material 50㎝ and surface area load 40 ㎥/㎡·hr was great than 99%, 99.2%, and 80%. Similarly, the rate of deordorization of 200ppm of hydrogen sulfide odor gas at surface area load(40, 60, 80 ㎥/㎡·hr) with 90㎝ of the height of packing material was great than 99%, 99% and 85% respectively.

50㎜ Hiflow-Ring P.P를 사용한 충진탑에서 흡수에 의한 물질전달에 관한 연구

姜兌坤,朴出在,金彰昊 동아대학교 환경문제연구소 1995 硏究報告 Vol.18 No.1

The study was carried to characteristics of mass transfer in packing tower which packed 50mm plastic Hiflow-Ring within d. 0.288m × H. 1.4m. Test systems were experimented' in conditions of air, air/water, NH₃-air/water under steady state. The results from experment are as follows: 1. The recent packing, 50mm plastic Hiflow-Ring was superior to conventional packings because of high wetted area per unit area, low weight, low pressure drop 2. The efficiency is affected by the distribution pattern and the number of liquid streams per unit cross-sectional area. At a given liquid flow rate, these factors govern the extent to which the liquid is uniformly distributed. In this respect, it should be noted that low-liquid floe rates are more difficult to distribute uniformly than high rates.

도시쓰레기 매립장에서 환경오염과 저감대책

金秀生,朴出在 동아대학교 환경문제연구소 1988 硏究報告 Vol.11 No.1

二軸延伸 폴리프로필렌薄膜의 誘電特性에 미치는 放射線照射의 影響

吳世元,賈出鉉,金旺坤 서울産業大學校 1994 논문집 Vol.39 No.1

Recently, the research on materials required for production of electric and electronic parts has strongly demanded for rapid developement in information industrial structure. But there are many different aging reasons that cause the intrinsic function of these polymers to dectrase when used insulators and dielectrics. In this research, It is studied that the variation of the dielectric characteristics of the specimen(biaxially oriented polypropylene) according to the change with irradiation dose(??Co-?? ray) of the influence of temperature and applied voltage. As for the temperature dependence of dielectric characteristics, the a peak at 110[℃] increases accordingly to the increment of irradiation which is contributed by ???crystal region. The β peak which apperas the orientation by dipoles and molecular motions in the amorphous region at about 60[℃]. For the voltage dependence of tan δat low temperature, the peak of the tan δshifts accordingly to the increasment of irradiation dose towarde the high temperature.

25㎜ NSW-ring, pp.를 充塡한 充塡塔에서 암모니아 吸收에 의한 充塡物의 特性硏究

申恩才,朴出在,金彰昊 동아대학교 환경문제연구소 1995 硏究報告 Vol.18 No.1

This study was carried out to demonstrate the superiority of used packing in view of energy saving and efficiency of mass transfer, comparing with conventional packing. The results are as follows : 1. Owing to low pressure drop under high load, 25mm NSW-ring, pp. can cause energy saving. 2. The unique magnitudes of used packing are as follows : C_(G) = 5.78 m = 0.67 n = 0.46 3. Used packing can make high efficiency including energy saving because of low pressure drop per the number of transfer unit. To rate the characteristic of packing, it should be carried out that the measurement of pressure drop per packing height and per the number of transfer unit. This study demonstrated the superiority of used packing by caning out above experiment and could be used as basic reference for design and predicting efficiency of packing tower which is filled with same packing.

充塡塔의 氣液逆流에 의한 水力學的 擧動의 數學的 解析硏究

金載洪,朴出在,金彰昊 동아대학교 공과대학 부설 한국자원개발연구소 1995 硏究報告 Vol.19 No.1

This study was carried out to interpret mathematically hydraulic behaviour in packing tower which packed 50 mm plastic Hiflow ring within d. 0.288 × H. 1.37 m. The results from experiment are as follows ; 1) In view of energy saving, the recent packing, 50 mm plastic Hiflow-ring was superior to conventional packings because of low pressure drop in high loads. 2) As relative error between mathematically caculated value and investigated value was less than 6% in the loading and flooding point, it found that their results were proved to adequancy. 3) Comparing calculated with experimented pressure drop in conditions of dry and wetted packing, relative errors are 3.96 and 5.6%, respectively. In order to evalute the operating character of packings, the type. size and material of packings must be estimated in various system and loads. This study is able to calculation, first all, the specific constants of each packing must be calculated. The mathematical interpretation method of this study revealed superior to existing methods because of low error in loading and flooding point.

폴리에틸렌 테레프탈레이트의 유전특성에 관한 연구

문도성,가출현,김봉열 연세대학교 산업기술연구소 1986 논문집 Vol.18 No.1

The electrical and internal frictional characteristics of the polyester film which Sun-Kyung Chemical Corporation made in Korea and the Lumirror film which Panac Corporation made in Japan are studied for the domestic production of polyethylene terephthalate(PET). And, the morphologys of two kind of films are investigated. It has been found that the dielectric constant tends to decrease as the orientational polarization starts around 14[kHz], and the dielecteic constant of polyester film is lower than the Lumirror film. And it has been found that the dispersion of frequency by the loss peak by the orientational polarization was achieved at around 14[kHz]. And it has been also found that there is the temperatural characteristics that βpeak is a achieved at 100[℃]-120[℃]. And, the dielectric loss and the change of temperature in polyester film is generally bigger than that in the Lumirror film. And also. the internal frictional loss αpeak corresponding to the dielectric loss αpeak is achieved at 95[℃], the bend of the shear modulus curve and the frequency curve.