http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
- 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
- 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
RISS 인기검색어
- 검색키워드
- 저자 : Abdullah M. Zeyad (검색결과 3 건)
- 무료
- 기관 내 무료
- 유료
-
Mohamed Amin,Abdullah M. Zeyad,Bassam A. Tayeh,Ibrahim Saad Agwa 국제구조공학회 2021 Structural Engineering and Mechanics, An Int'l Jou Vol.80 No.2
Heavyweight geopolymer concrete (HWGC) is a new concrete type that combines the benefits of geopolymer concrete (GC) and heavyweight concrete. HWGC can be used to produce particular properties such as high radiation shielding, and mass concrete elements. HWGC based on fly ash and ground granulated blast furnace slag, using electric arc furnace steel slag (EAFSS), barite and ilmenite coarse aggregates can substantially have higher specific gravities than concrete made with crushed dolomite. In the experimental work carried out on four main groups, 13 GC mixes are prepared by using heavyweight coarse aggregates (HWCAs) at volume ratios of 0%, 25%, 50%, 75% and 100%. Fresh and mechanical properties, compressive and tensile strengths, and influence of high temperature on radiation are investigated for specimens subjected to high temperatures of up to 900°C for 1, 2 and 3 hours. Moreover, the internal structure of geopolymer is analyzed using scanning electron microscope and energy-dispersive X-ray. Results show a good effect of HWCAs on the properties, radiation shielding and unit weight. The density of heavyweight geopolymer mixes ranges between 2,415 and 3,480 kg/m3, and HWCA ratios contribute to an increase in all properties of GC mixtures using up to 75% of NWCAs. Heavier coarse aggregate of ilmenite dampens the effect of higher temperatures on GC strength compared with lighter aggregates. In addition, replacing crushed dolomite with heavyweight aggregates of EAFSS, barite and ilmenite increases the attenuation rate to 27%, 21% and 13%, respectively. This finding confirms that the type of aggregate used in the production of GC is important for reducing the permeability of X-ray.
-
Properties and durability of concrete with olive waste ash as a partial cement replacement
Tayeh, Bassam A.,Hadzima-Nyarko, Marijana,Zeyad, Abdullah M.,Al-Harazin, Samer Z. Techno-Press 2021 Advances in concrete construction Vol.11 No.1
This research aims to study the utilization of olive waste ash (OWA) in the production of concrete as a partial substitute for cement. Effects of using OWA on the physical and mechanical properties of concrete mixtures have been investigated. This is done by carrying out tests involving the addition of various percentages of OWA to cement (0%, 5%, 10% and 15%). For each percentage, tests were performed on both fresh and hardened concrete; these included slump test, unit weight test and compressive strength test after 7, 28 and 90 days. Durability tests were investigated in solutions containing 5% NaOH and MgSO4 by weight of water. In addition, resistance to high temperatures was tested by subjecting the cubes to high temperatures of up to 170℃. The results of this research indicate that a higher percentage of OWA gives a lower compressive strength and lower workability but higher performance in terms of durability against both different weather conditions and high temperatures.
-
Mohamed Amin,Ahmad A. Hakamy,Abdullah M. Zeyad,Bassam A. Tayeh,Ibrahim Saad Agwa 국제구조공학회 2023 Structural Engineering and Mechanics, An Int'l Jou Vol.85 No.1
High-strength shielding concrete against gamma radiation is a priority for many medical and industrial facilities. This paper aimed to investigate the gamma-ray shielding properties of high-strength hematite concrete mixed with silica fume (SF) with nanoparticles of lead dioxide (PbO2), tungsten oxide (WO3), and bismuth oxide (Bi2O3). The effect of mixing steel fibres with the aforementioned binders was also investigated. The reference mixture was prepared for high-strength concrete (HSCC) containing 100% hematite coarse and fine aggregate. Thirteen mixtures containing 5% SF and nanoparticles of PbO2, WO3, and Bi2O3 (2%, 5%, and 7% of the cement mass, respectively) were prepared. Steel fibres were added at a volume ratio of 0.28% of the volume of concrete with 5% of nanoparticles. The slump test was conducted to workability of fresh concrete Unit weight water permeability, compressive strength, splitting tensile strength, flexural strength, and modulus of elasticity tests were conducted to assess concrete’s engineering properties at 28 days. Gamma-ray radiation of 137Cs emits photons with an energy of 662 keV, and that of 60Co emits two photons with energies of 1173 and 1332 keV were applied on concrete specimens to assess radiation shielding properties. Nanoparticles partially replacing cement reduced slump in workability of fresh concrete. The compressive strength of mixtures, including nanoparticles was shown to be greater, achieving 94.5 MPa for the mixture consisting of 7.5 PbO2. In contrast, the mixture (5PbO2-F) containing steel fibres achieved the highest values for splitting tensile, flexural strength, and modulus of elasticity (11.71, 15.97, and 42,840 MPa, respectively). High-strength shielded concrete (7.5PbO2) showed the best radiation protection. It also showed the minimum concrete thickness required to prevent the transmission of radiation.
연관 검색어 추천
이 검색어로 많이 본 자료
활용도 높은 자료
