http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
다중 블록 격자를 이용한 원뿔 직관 모양의 벌류트 유동의 수치해석
배황(H. Bae),강현구(H.G. Kang),윤주식(J.S. Yoon),박기철(K.C. Park),장근식(K.S. Chang) 한국전산유체공학회 2006 한국전산유체공학회지 Vol.11 No.1
Numerical investigation of a centrifugal compressor volute having a modified straight conical duct has been made. Three-dimensional Reynolds-Averaged Navier-Stokes equations with k-ε turbulence equation are solved To avoid coordinate singularity at the central axis of the duct, multi-block H-type grid is generated on the circular cross-sections of the volute and stretched toward the solid wall boundary. We obtained numerical results with three different mass flow rates at the volute inlet, namely, with the inlet conditions that give small, medium and large mass flow rates at the outlet of the conical duct. Agreement with the experimental results is observed.
강현구,나창순,Kang, Thomas H.K.,Rha, Chang-Soon 한국전산구조공학회 2011 한국전산구조공학회논문집 Vol.24 No.1
본 연구에서는 비부착형 포스트텐션 시스템의 해석에 적용할 수 있는 모델링기법을 제시하였다. 모델링은 유한요소 해석 프로그램을 이용하였으며, tube-to-tube contact 요소를 도입하여 강연선의 물리적 형상을 직접적으로 모델링하는 방법과 실제의 강연선 외에 가상의 강연선을 콘크리트에 매입하고, 두 개의 강연선을 스프링으로 연결하여 간접적으로 모델링하는 방법을 동시에 제시하고 비교하였다. 콘크리트의 인장경화 현상을 무시하였을때 두 모델링기법에서는 거의 동일한 결과를 제공하지만 콘크리트의 인장경화를 고려한 경우에는 스프링을 이용한 간접적인 모델링기법을 통해서만 결과를 얻을 수 있었으며, 결과 또한 콘크리트의 경화현상을 고려하지 않은 경우와 다소 상이하였다. 비교를 통하여 비부착형 포스트텐션 시스템의 모델링기법으로 스프링을 이용한 모델링기법을 최종적으로 선정하고 기존의 실험적 연구에서 인용한 실험결과와 해석결과를 비교, 검증하였으며 또한 파라미터 스터디를 통해서 모델링의 적절성을 확인하였다. This study presents modeling technologies applicable to an unbonded post-tension system using a finite element software package. In this study, both direct modeling method and multiple spring method were used. The direct modeling method adopts tube-to-tube contact elements to represent the physical feature of a post-tension system. The multiple spring method uses virtual tendons attached to the real tendons using a number of rigid axial springs that freely rotate at the ends. Both modeling technologies provide accurate predictions. However, only the multiple spring method provides numerically stable and reliable responses with a consideration of concrete tension stiffening effects. Therefore, the multiple spring method turned out to be a generally applicable modeling technology for the unbonded post-tension system. Comparisons were made for the analytical and experimental results for the verification of the selected method, and parameter studies were carried out to confirm the appropriateness of the modeling assumptions and parameters adopted in the analysis.
성능기반 내풍설계 적용을 위한 비탄성 설계법과 성능목표
강현구 ( Kang Thomas H.-k. ) 한국구조물진단유지관리공학회 2020 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.24 No.2
내진설계에서 활용되던 성능기반 설계가 최근 풍공학 분야로 확장되어 가고 있으며, 최근 미국 토목학회에서 성능기반 내풍설계를 위한 가이드라인을 개발하였으나 아직 상세한 적용 지침이 확립되진 않았다. 따라서 이 연구에서는 비탄성 내풍설계 도입방법, 성능기반 내풍설계를 위한 성능목표, 시간이력 풍하중 산정 등을 제시하였다.
강현구 ( Kang Thomas H.-k. ) 한국구조물진단유지관리공학회 2022 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.26 No.1
비부착 텐던을 활용한 포스트텐션 공법이 원전 격납건물 등 중요 시설을 중심으로 활용되고 있다. 사용 목적에 따라 텐던의 구성물질을 변화시키며 다양한 텐던 공법이 개발되고 있으며, 각각의 재료들이 가지는 특성으로 인해, 구조 및 내화 성능의 측면에서 상이한 특징을 가질 것으로 예상된다. 본 연구에서는 화재 실험을 통해 비부착 텐던 공법별 구조 및 내화 거동을 온도 변화, 변위, 변위율, 긴장력 변화의 측면에서 평가하여 분석한 연구를 소개하였다.
강현구(Kang Thomas H.-K),이철호(Lee Cheol-Ho),나창순(Rha Chang-Soon) 대한건축학회 2011 大韓建築學會論文集 : 構造系 Vol.27 No.4
Concrete-filled steel tube (CFT) members have primarily been used as beam-columns for the purpose of resisting compression or for combined compression and bending moment. Structural and constructional merits created demand for the use of CFTs as beam members under pure bending moment. Flexural strengths of CFT beam members are presented in many design codes but the related experimental studies are quite limited. This study compares the flexural strengths defined by design codes of AISC-LRFD, Eurocode 4, and AIJ and those from previous experimental tests. It is found herein that the flexural strengths of CFTs are affected by the size and shape of the tube section and material characteristics, and that depending on these factors, it is possible to overestimate the actual flexural strength of CFT beams. Therefore, this study underscores the need for additional data from full-scale CFT beam tests and for a systematic and thorough investigation of theoretical assumptions that underlie the sectional analysis of the design codes.