http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
오늘 본 자료
주강계 저열팽창 주조합금의 열팽창 계수와 경도에 미치는 Mo , V 첨가의 영향
김영한,윤의박,문병문,홍영명 ( Young Han Kim,Eui Park Yoon,Byoung Moon Moon,Young Myung Hong ) 한국주조공학회 1998 한국주조공학회지 Vol.18 No.5
N/A For enhancing the mechanical properties of LTE (low thermal expansion) cast steel, systematic researches have been carried out. The effects of alloying elements such as vanadium, molybdenum and carbon on the hardness and linear thermal expansion coefficient were investigated. In the range of 0.5∼2.3 wt% carbon, addition of 1.73 wt% carbon caused hardness increase due to the formation of eutectic carbide having high hardness but over the range of 1.73 wt% carbon, hardness was decreased. Thermal expansion coefficient increases with carbon contents. In the LTE cast steel containing 0.6 wt% carbon, hardness increased up to 1.96 wt% vanadium addition. But over the range of 1.96 wt% vanadium hardness was decreased by coarse eutectic carbide. Thermal expansion coefficient of LTE cast steel containing 0.6 wt%carbon moderately increased with increasing vanadium contents. There was no significant variation of hardness and thermal expansion coefficient according to molybdenum content in LTE cast steel. (Received June 29, 1998)
프레스 생산성 향상을 위한 프로그래시브 인너 트랜스퍼금형 개발
류호현(Ho-yeun Ryu),김승수(Seung-soo Kim),김형재(Hyoung-jae Kim),홍영명(Young-myung Hong),박종호(Jong-ho Park) 한국생산제조학회 2007 한국공작기계학회 춘계학술대회논문집 Vol.2007 No.-
프레스 작업현장에서는 부품의 형상이 복잡한 경우에는 대부분 다수의 단발금형을 이용하여 여러대의 프레스 작업공정으로 나누어 생산 제작되어지는 부품들이 많이 있어 한대의 프레스 작업공정으로 개선하고자 하였다. 개발되어진 프로그래시브 인너 트랜스퍼 금형은 새로운 복합금형 형식으로 금형공정기술을 개선하기 위한 프래스 금형제작기술이다. 프로그래시브 금형 형태의 내부에 단발금형들을 배열하고 각 금형간 재료를 이송시킬 수 있는 시스템을 갖춘 것으로 금형작업 현장의 공정개선 및 trouble shooting을 줄이고 생산성 향상을 기대할 수 있게 되었다.
공침법에 의한 BiDy₂Fe_(5)O_(12) 결정형 나노입자 분말의 제조 및 응용 연구
홍영대,조정환,김태엽,전성욱,홍영명 고신대학교 자연과학연구소 2007 고신대학교 자연과학연구소 논문집 Vol.14 No.-
금속산화물들은 각종 산업재료로서 유용하며 더욱이 그것들의 결정형 나노입자를 경제적으로 제조하는 기술은 21세기 첨단산업에 매우 중요하다. 저자들은 前報에서 화학합성법에 의한 각종 금속산화물의 나노입자를 제조하는 표준공정법을 연구하여 보고하였다. 본 연구에서는 그 표준공정법을 이용하여, 가넷의 일종인 BiDy_(2)Fe_(5)O_(12) 결정 나노입자 분말을 제조하고 그것의 자성체로의 응용을 위해 제품특성을 조사하었다. 가네트 제조과정에 필요한 침전물은 제품설계에 의거 몰비로 계산된 Bi, Dy, Fe의 질산염들의 혼합수용액에 침전제로서 pH NH_(3)-NH_(4)CI 완충용액 일정량을 가하여 얻어졌다. 이렇게 제조된 침전은 열처리과정을 거처 BiDy_(2)Fe_(5)O_(12) 결정형 나노입자 분말로 만들어졌다. 얻어진 제품의 입자크기, 조성, 결정구조 및 광자기성 등 특성시험이 SEM, ICP, XRD, 그리고 VSM 등을 사용하여 실시되었다. 각종 분석법을 사용하여 제품의 특성을 조사한 결과, 최초에 설계한 대로의 자성체가 나노 크기의 분말로 얻어졌으며 이것을 통하여 전보에서 확립한 표준공정법의 유효성도 입증되었다. Metallic oxides are useful as various industrial materials. Futhermore, the cost-effective techniques of fabricating the crystalline nanopartides of metallic oxides are very important for the high-tech industries of the 21 century, In the previous study, the authors reported the standard process for the preparation of crystalline nanoparticles of metallic oxides by chemical synthesis, In this study, BiDyzFesOiz nanoparticles were prepared by using the reported standard process and the characteristics of the product were investigated for applicability as magnetic substance. The precipitation needed for manufacturing process of garnet was made by adding the NH_(3)-NH_(4)CI buffer solution of pH 10 to the mixed solution of bismuth (III) nitrate, dysprosium(III) nitrate and iron(III) nitrate. The amount of each nitrate was calculated by the designed mole ratios. The nano-size crystalline powders of BiDy_(2)Fe_(5)O_(12) were earned by heating the precipitation at 800℃ for 4 hours in air. The characterizations, such as particle size, composition, crystal structure and magneto-optical property of garnet were tested by SEM, ICP, XRD, and VSM analyses. The results of the analyses showed the following two facts. First, a good magnetic substance of BiDy_(2)Fe_(5)O_(12) was earned as crystalline nano-size powders according to the original design. Next, the established standard process for the fabrication of METALLIC oxides nanonartieles was approved as a very effective method.