http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
건축물 해체공사의 통합 안전관리 가이드라인 개발 및 적용성 평가
최종수,허성태,고원준,이희민,Choi, Jong-Soo,Heo, Seong-Tae,Go, Won-Joon,Lee, Hee-Min 한국건설관리학회 2010 한국건설관리학회 논문집 Vol.11 No.6
Safety management for building deconstruction works has been received extremely limited attention in the domestic construction society. Lack of systematic safety management practices and defective education system lead to the high level of fatality compared to that of advanced countries. Under the above domestic deconstruction environment, the authors intend to develope an integrated safety management guidelines that covers both mechanical and partial deconstruction works. Research outcome includes such specific educational materials as safety manual, checklists, pocket pamphlets, and e-manuals. Furthermore, to validate the applicability of the above materials, questionnaire survey and interviews were conducted. Detailed descriptions are provided for each research outcome. 국내 건축물 해체공사의 안전관리 분야는 연구, 제도정비 및 실무 차원에서 소외되어온 경향이 있다. 해체공사의 수행과정에 있어서 체계적이지 못한 안전관리 실태, 부실한 교육체계, 활용할 수 있는 교육용 교재의 미흡 등은 안전사고의 빈도 및 사고발생시 중대사고로 이어지는 주요 원인이 되며 그 수준은 외국의 경우와 비교하여 볼 때 대단히 높은 실정이다. 본 연구에서는 이러한 국내 해체업계 현황의 개선을 목표로 기계식 전면해체공사 및 리모델링을 위한 부분해체공사를 포괄하는 통합 안전관리 가이드라인을 개발하였다. 구체적인 연구 성과물은 안전관리매뉴얼, 체크리스트, 포켓용 팸플릿, 전자매뉴얼 등이며, 연구성과의 검증을 위하여 해체공사 유경험자를 대상으로 실무에 대한 적용성 평가를 수행하였다.
최종수,최영준,채성태,유성원,Choi, Jong-Soo,Choi, Young-Jun,Chae, Seong-Tae,Yoo, Sung-Won 한국건축시공학회 2009 한국건축시공학회지 Vol.9 No.5
현재까지 국내 건설사들은 공법의 개선, 제안 등 다양한 방법을 통해 공사비 원가 절감을 도모하여 왔다. 그러나 그러한 노력들은 각 건설사별로 이루어져 왔으며 성과를 업계 차원에서 공유하는 것으로는 연결되지 못한 실정이다. 따라서 본 연구에서는 최근 완공된 공동주택 1개동 및 지하주차장의 건설 공사비를 기준으로 민간부문에서 적용된 다양한 원가절감 사례들을 조합하여 적용할 경우 기대되는 공사비 원가 절감수준을 분석하였다. 분석결과에 의하면 아파트공사의 경우 기존 대비 3.77%의 공사비 절감을, 지하주차장공사의 경우 7.33%, 그리고 아파트 및 지하주차장을 합한 총 공사비 차원에서는 5.26%의 절감이 가능한 것으로 분석되었다. The primary focus of this study has been directed towards assessing the potential impact of construction method improvement on a reduction in project cost. A total of 90 actual application cases were collected from a public organization and private construction firms, and 32 cases were used in analysis by adopting a synthetic approach. The level of cost reduction was measured in terms of material and labor cost by comparing the existing method and the improved method. An analysis of the results indicates that project cost can be reduced by up to 5.26 percent compared to a normal project by adopting a synthetic approach. Additional benefits include the assurance of uniform quality, savings in terms of labor and/or materials, and improved productivity. The potential of the applicability of this approach to other types of buildings and the implications of research findings were discussed in detail.
최종수,Choi, Jong-Soo 한국건설관리학회 2005 건설관리 : 한국건설관리학회 학회지 Vol.6 No.5
기업 인수/합병의 성과에 대한 평가는 인수/합병 발표일 전후 단기간에 걸쳐 실현되는 경제적인 이익을 측정하는 방법과 인수/합병 종료 후의 장기 경영성과를 평가하는 방법으로 대별된다. 본 연구에서는 최근 국내외에서 급증하고 있는 건설분야 인수/합병 중 선정된 샘플을 대상으로 위에서 기술된 전자의 방법을 중심으로 전반적인 성공여부를 분석/평가하였다. 또한 인수/합병이 기업전략의 이행이라는 관점에서 사업다각화 방향에 따른 성과를 비교/분석하였다. 분석결과에 의하면 국내외 건설분야 인수/합병의 단기성과는 다소간의 경제적 이익을 실현한 것으로 평가되었으나 통계분석의 관점에서 성공적이라는 결론을 내리기 어려운 것으로 나타났다. 한편, 사업다각화 방향에 따른 성과의 비교에서는 유사부문 및 타 부문으로의 사업다각화 사이에 뚜렷한 차이가 없는 것으로 나타났다. The success of mergers and acquisitions(M&A) have been evaluated by either measuring ex ante expectations for the specified time period(Window) or assessing long term-based post operating performance (ex post operating performance). In this study, utilizing cumulative abnormal return(CAR) method, M&As which are observed in both domestic and U.S. construction industries were analyzed then research outcomes are compared. Analysis results indicate that stockholders of public construction companies did not realize significant economic gains from M&As. In other words, there was no synergistic gains from the construction M&As. Also, no significant performance difference was observed between related and unrelated diversifications.
소형 원심형 홴의 형상변수가 성능에 미치는 영향에 대한 실험적 연구
최종수,이욱,Choi, Jong-Soo,Rhee, Wook 한국유체기계학회 1999 한국유체기계학회 논문집 Vol.2 No.1
The performance of a centrifugal fan depends on the dimensional parameters of impeller, such as the inlet and exit diameter, area ratio, relative flow angles to the blade, and the number of blades. These design parameters, however, are inter-related, so it is very difficult to identify the effect of each parameter on the fan performance. In this experimental study the effects of the design parameters on the performance of a small centrifugal impeller being used for vacuum cleaners are investigated. A total of 30 shrouded impellers with 120mm diameter were tested and the results were non-dimensionalized to compare their performance.
무선 네트워크 기반의 실시간 환자 모니터링 시스템 구축 사례 연구
최종수(Jong Soo Choi),김동수(Dongsoo Kim) 대한산업공학회 2010 산업공학 Vol.23 No.3
As wireless and mobile technologies have advanced significantly, lots of large sized healthcare organizations have implemented so called mobile hospital (m-Hospital) which provides a location independent and point of care (POC) clinical environment. Implementation of m-Hospital enhances quality of care because health professionals such as physicians and nurses can use hospital information systems at the very place where patients are located without any delay. This paper presents a real-time patient monitoring system based on wireless network technologies. A general framework for the patient monitoring process is introduced and the architecture and components of the proposed monitoring system is described. The system collects and analyzes biometric signals of in-patients who suffer from cancer. Specifically, it continuously monitors oxygen saturation of patients in bed and alarms health professionals instantly when an abnormal status of the patient is detected. The monitoring system has been used and clinically verified in a university hospital.
프로세스 분석을 통한 처리공정 표준화 및 웹 기반 교육모델 개발
최종수(Choi Jong-Soo),고윤혁(Goh Yoon-Hyuck) 대한건축학회 2008 大韓建築學會論文集 : 構造系 Vol.24 No.3
The primary focus of this study has been directed towards articulating gas treating processes and synthesizing numerous process related elements. Greater depths of information and materials were to be analyzed necessarily to take full advantage of what resources are available; the as-built drawings and documents. Drawn from the analysis results, a standard process model was proposed. The proposed model includes variable components that may be added in the standard model depends on the owner's requirements or types of output. The proposed model extended into web-based model so that readily explored by users. Furthermore, the model enables users to identify various gas treating license lists provided in the context.