http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
최연웅,장영운,홍태화,조기성,Choi, Yun-Woong,Jang, Young-Woon,Hong, Tae-How,Cho, Gi-Sung 한국공간정보학회 2009 한국공간정보학회지 Vol.17 No.3
최근 PSC 교량, 사장교, 현수교 등 중.장지간 교량의 건설이 증가하고 있으며 이러한 장대교량의 안정성 및 사용성 확보를 위하여 장대교량의 계측 및 모니터링을 통한 손상도 및 안전도 평가에 보다 많은 관심과 연구개발이 집중되고 있으나 인류의 경험과 이론의 지속적인 발전에도 불구하고 교량구조물의 실제 거동을 예측하고 안전성을 평가하는 것은 현재까지도 쉽지 않은 일이다. 본 연구에서는 GPS를 이용한 RTK 측정기법에 의하여 장대교량의 거동을 측정하고 기설된 교량의 모니터링 계측치를 비교 분석함으로써 GPS를 이용한 교량의 거동분석의 적용가능성 및 신뢰성 확보가능 여부를 파악하고자 하였다. Recently, the various studies has been focused on evaluating the damage and stability of long span bridge through measuring and monitoring to ensure the stability and usability. But, even if various studies are performed, it is hard to predict and evaluate the real motion of structure. The aim of this study is check the application of GPS to the motion monitoring of long span bridge by comparing data acquired form RTK-GPS and laser displacement meter.
최연웅(Choi Yun Woong),최내인(Choi Nei In),이준환(Lee Joon Whoan),조기성(Cho Gi Sung) 대한공간정보학회 2006 대한공간정보학회지 Vol.14 No.4
본 연구에서는 LiDAR 자료로부터의 지면정보 추출기법들에 대한 정확도를 평가하였다. 특히, 포인트 형태의 벡터자료인 LiDAR 원시자료를 직접 활용하는 기법과 정규격자형식의 DSM 형식으로 변형하여 활용하는 기법의 정확도를 비교하였다. 정규격자형식의 자료를 이용하는 방법으로는 경계추출 및 필터링 기법을 이용하는 방법, 평균필터링에 의하여 생성된 추세면을 이용하는 방법을 적용하였으며, 벡터구조의 원시 LiDAR 자료를 직접 활용하는 기법으로써 Local Maxima 및 엔트로피를 이용하는 방법을 적용하였다. 또한, 수작업을 통하여 제작된 DEM 및 수치지도의 축척별 오차허용범위를 이용하여 정확도 평가를 수행하였으며, 경계검출 및 필터링, 추세면, Local Maxima, 엔트로피를 이용한 각 기법의 DEM의 평균 오차는 0.27m 2.43m, 0.13m, 0.10m로써 엔트로피를 이용한 방법이 가장 높은 정확도를 나타내었다. 또한, 벡터형식의 LiDAR 원시자료를 직접 이용하는 방법이 격자형식으로 변환하는 방법에 비하여 상대적으로 높은 정확도를 나타내었다. This study assessed the accuracies of the ground information extracting methods from the LiDAR data. Especially, it compared two kinds of method, one of them is using directly the raw LiDAR data which is point type vector data and the other is using changed data to DSM type as the normal grid type. The methods using Local Maxima and Entropy methods are applied as a former case, and for the other case, this study applies the method using edge detection with filtering and the generated reference surface by the mean filtering. Then, the accuracy assessment are performed with these results, DEM constructed manually and the error permitted limit in scale of digital map. As a results, each DEM mean errors of methods using edge detection with filtering, reference surface, Local Maxima and Entropy are 0.27m, 2.43m, 0.13m and 0.10m respectively. Hence, the method using entropy presented the highest accuracy. And an accuracy from a method directly using the raw LiDAR data has higher accuracy than the method using changed data to DSM type relatively.
최연웅(Choi Yun Woong),고신영(Ko Shin young),김창우(Kim Chang Woo),고제웅(Go Je Woong),조기성(Cho Gi Sung) 대한공간정보학회 2010 한국지형공간정보학회 학술대회 Vol.2010 No.3
본 연구에서는 GSD 25cm급의 대축척 디지털 항공사진이 촬영됨에 따라 이에 적합한 국가기본도 제작사양 및 기준 등 작업 방법 마련이 필요한 상황에서 GSD 25cm급 영상을 활용한 자동매칭, 수치도화 및 동일한 대상지역에 대한 LiDAR 자료를 활용하여 대표적인 지형표현방법인 등고선을 제작하고 정확도를 분석하였다.
최연웅(Choi Yun Woong),장영운(Jang Young Woon),이근상(Lee Geun Sang),조기성(Cho Gi Sung) 대한공간정보학회 2010 한국지형공간정보학회 학술대회 Vol.2010 No.1
정밀도면에 매우 우수한 LiDAR(Light Detection and Ranging) 시스템은 그 효율성을 입증 받아 지상의 측량에 관한 여러 분야에서 활용되고 있다. 그러나 건물 추출 등에 LiDAR 자료를 활용하기 위해서는 원시자료의 필터링 및 분할 등의 전처리 과정이 선행되어야 하지만 대부분의 경우 명확하지 않은 결과를 보인다. 본 연구에서는 LiDAR 자료로부터 건물의 외곽선 추출을 위한 건물의 경계점을 추출하는 알고리즘을 제시하고자 하였다.
최연웅(Choi, Yun Woong),유지호(You, Ji Ho),조기성(Cho, Gi Sung) 대한공간정보학회 2015 대한공간정보학회지 Vol.23 No.4
최근 무인항공기(UAV : Unmaned Aerial Vehicle)는 신속하고 정확하게 3차원 공간정보를 구축하는 새로운 기술로 다양한 분야에서 연구와 활용이 증가하고 있다. 이러한 무인항공기는 위성측량이나 기존 항공측량에 비해 경제적이며 5cm급 이하의 고해상도 영상을 편리하게 취득할 수 있다는 장점을 지니고 있다. 따라서 본 논문에서는 무인항공기와 비측량용 디지털 카메라를 이용하여 3차원 공간정보의 제작 가능성과 기존 수치사진측량 시스템과의 호환성 분석을 위하여 무인항공기 전용 S/W 및 DPW(Digital Photogrammetry Workstation)를 이용해 성과품인 수치표고모델과 정사영상을 제작하고 정확도 분석을 수행하였다. UAV 전용 S/W와 DPW로 제작된 수치표고모델과 정사영상의 정확도 분석 결과 UAV 자료와 기존 수치사진측량 시스템과의 호환성은 낮은 것으로 판단된다. The various studies and applications for UAVS(Unmaned Aerial Vehicle System) have been recently increased as a new technology to create 3D spatial information rapidly and accurately. UAV(Unmanned Aerial Vehicle) is economical when comparing with conventional technique, such as satellite and aerial survey, and can quickly obtain high resolution data under 5cm. This paper examined the utilizing possibility to creating 3D spatial information and analysis the compatibility the UAV data obtained by non-metric digital camera with conventional numerical photogrammetric system. The DEM and normal orthophoto is created by exclusive S/W and DPW(Digital Photogrammetry Workstation) then analysis the accuracy of created data. As a result, the accuracy of the created DEM and normal orthophoto, which is obtained by UAV then processed by DPW, is not satisfied, so it is estimated that the compatibility the UAV data with conventional numerical photogrammetric system is low.